> Ok, so it looks like this has no solution, right? :)
Well, as I said earlier (quoted below), "I'll see what I can do to fix
How about I come to Prague to discuss this in more detail on Saturday
evening, perhaps over a beer? Sunday is busy, and so is monday (scheduled
a meeting with the giraffes).
> Dne středa, 9. května 2012 10:54:55 UTC+2 Heikki Hannikainen napsal(a):
> That's a completely different thing, there are variations in the monitor
> format. Some TNCs show a star on each used path component, some TNCs show
> a star on all used path component, and the first thing aprs.fi does (when
> decoding that) is adding the star on all components before the one with
> the star.
> On Wed, 9 May 2012, OK1ALX wrote:
> > Hi
> > When you say that, i can see it now. The rf monitor on Digi_Ned console shows
> > the star next to the digipeater calsigns whis has digipeated. But if i look in
> > the rf monitor on UI-View with TNC connected directly, then i see star only at
> > last element in digipeated path. But if i connect UI-View through the AGW PE,
> > then i can see the stars at every element which has digipeated.
> > Which is kind of strange, it means that there are different softwares, with
> > different handling? Thats weird.
> > If you don't get this information correct through APRS-IS, then i can
> > understand you cannot process the code correctly. :-(
> > Anyway, you will be welcome in Prague and if you'll have a spare time, we
> > could meet if you like.
> > Libor, OK1ALX
> > Dne středa, 9. května 2012 9:25:55 UTC+2 Heikki Hannikainen napsal(a):
> > Hi,
> > On Tue, 8 May 2012, OK1ALX wrote:
> > > Second, the normal map shows the lines of the packet path, red
> > for normal hop,
> > > violet for hop heading to igate. Here, the line is shown for the
> > first hop
> > > (the digi i have on the first place in path), even if digi
> > doesn't hear&repeat
> > > the packet. So it looks like it goes over the digi everytime
> > (since the packet
> > > path is set as described above).
> > Yeah, you're right. The background for this is the fact that the
> > backend
> > code precompiles references to all of the known callsigns in the
> > path
> > (even if the callsigns didn't actually digi the packet). This is
> > right and
> > well, since it's good to make all of the callsigns clickable links
> > in all
> > of the views, and the links are quickly generated using those
> > precompiled
> > references.
> > The bug is that the path line is drawn via all known stations
> > referenced
> > in the path without paying attention to the "has digipeated" info.
> > The
> > "has digipeated" information is not currently available to the
> > user interface code that draws the line in question. I'll see what
> > I can
> > do to fix that.
> > You're the first one to complain, since it's quite rare to do what
> > you're
> > doing (configuring specific digipeaters).
> > When I fix this, some other people will probably come complaining.
> > If I
> > remember right, some popular digipeater doesn't set the "has
> > digipeated"
> > bit in some situation when replacing a path element with it's own
> > callsign.
> > I'll come and test your digipeater paths in Prague in a week
> > (Sat-Tue
> > 19-22th).
> > > The packet goes directly to igae OK1KHL-1, not even touching the
> > OK1ALX-2
> > > digi:
> > > 2012-03-03
> 21:05:36CET:OK1ALX>UP0R15,OK1ALX-2,WIDE2-2,qAR,OK1KHL-1,T2CZECH:`+`o |n>/]"6@}438.900MHz op.L
> > ibor
> > > =
> > > - on the map, the line is drawn trough the digi (nonexisting
> > hop)
> > - Hessu
> > --
> > You received this message because you are subscribed to the Google Groups
> > "aprs.fi" group.
> > To view this discussion on the web visit
> > https://groups.google.com/d/msg/aprsfi/-/JYHHxi_WwQcJ.
> > To post to this group, send email to apr...@googlegroups.com.
> > To unsubscribe from this group, send email to
> > aprsfi+un...@googlegroups.com.
> > For more options, visit this group at
> > http://groups.google.com/group/aprsfi?hl=en.
> - Hessu
> You received this message because you are subscribed to the Google Groups "aprs.fi" group.
> To view this discussion on the web visit https://groups.google.com/d/msg/aprsfi/-/VOobU1chTBEJ.
> To post to this group, send email to apr...@googlegroups.com.
> To unsubscribe from this group, send email to aprsfi+un...@googlegroups.com.
> For more options, visit this group at http://groups.google.com/group/aprsfi?hl=en.