HI Alli want to set up wifi on village Telco. i have already have an up running firmware. i can see on my phone VT-SECN-AP but is secured.
--
You received this message because you are subscribed to the Google Groups "Village Telco Development Community" group.
To unsubscribe from this group and stop receiving emails from it, send an email to village-telco-...@googlegroups.com.
To post to this group, send email to village-...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/village-telco-dev/62da69f6-c02f-4cc2-9269-355ab78726f9%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "Village Telco Development Community" group.
To unsubscribe from this group and stop receiving emails from it, send an email to village-telco-...@googlegroups.com.
To post to this group, send email to village-...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/village-telco-dev/1dcb647c-6394-4f1f-b62e-36698ad826b7%40googlegroups.com.
--
You received this message because you are subscribed to the Google Groups "Village Telco Development Community" group.
To unsubscribe from this group and stop receiving emails from it, send an email to village-telco-...@googlegroups.com.
To post to this group, send email to village-...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/village-telco-dev/3beb0276-71b3-4696-bf90-7ec8be2859fc%40googlegroups.com.
That should be all.
You need to reboot for the changes to take effect.
Login and run ifconfig command and post the output here so we can see what is happening.
Regards
--
You received this message because you are subscribed to the Google Groups "Village Telco Development Community" group.
To unsubscribe from this group and stop receiving emails from it, send an email to village-telco-...@googlegroups.com.
To post to this group, send email to village-...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/village-telco-dev/a96d3f86-fead-4fb3-9b9f-1cea92d7b24b%40googlegroups.com.
--
You received this message because you are subscribed to the Google Groups "Village Telco Development Community" group.
To unsubscribe from this group and stop receiving emails from it, send an email to village-telco-...@googlegroups.com.
To post to this group, send email to village-...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/village-telco-dev/c0f3cf86-6f42-40bd-9493-fb22c705d2b1%40googlegroups.com.
Sorry I can not read the screenshots.
Can you copy the text from the screen an paste inyo the email please?
To copy from terminal, left click and drag to select thevrequired text, then right click and select Copy.
Then paste into email.
--
You received this message because you are subscribed to the Google Groups "Village Telco Development Community" group.
To unsubscribe from this group and stop receiving emails from it, send an email to village-telco-...@googlegroups.com.
To post to this group, send email to village-...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/village-telco-dev/c793d83b-99dc-49ac-a2e8-df37835f2567%40googlegroups.com.
cat /etc/config/network
config interface 'loopback'
option ifname 'lo'
option proto 'static'
option ipaddr '127.0.0.1'
option netmask '255.0.0.0'
config interface 'lan'
option type 'bridge'
option proto 'static'
option ipaddr '10.130.1.20'
option netmask '255.255.255.0'
option dns '8.8.8.8'
option ifname 'eth0'
option gateway '255.255.255.255'
config interface
option ifname 'bat0'
config interface 'mesh_0'
option proto 'static'
option ipaddr '10.10.1.20'
option netmask '255.255.255.0'
option mtu '1532'
config interface 'wan'
option ifname 'eth1'
option proto 'dhcp'
brctl show
bridge name bridge id STP enabled interfaces
br-lan 7fff.687251057803 no eth0
wlan0
That all looks fine.
If you connect the secondary Ethernet port to an upstream router it should get an IP address and allow access to the internet through the upstream router.
Is that working?
--
You received this message because you are subscribed to the Google Groups "Village Telco Development Community" group.
To unsubscribe from this group and stop receiving emails from it, send an email to village-telco-...@googlegroups.com.
To post to this group, send email to village-...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/village-telco-dev/bf7c7158-847d-4ca0-bae8-0ee1c7158a70%40googlegroups.com.
--
You received this message because you are subscribed to the Google Groups "Village Telco Development Community" group.
To unsubscribe from this group and stop receiving emails from it, send an email to village-telco-...@googlegroups.com.
To post to this group, send email to village-...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/village-telco-dev/e61b0bd6-b1e5-4285-863b-e3a3df5104f0%40googlegroups.com.
--
You received this message because you are subscribed to the Google Groups "Village Telco Development Community" group.
To unsubscribe from this group and stop receiving emails from it, send an email to village-telco-...@googlegroups.com.
To post to this group, send email to village-...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/village-telco-dev/85a02165-fab7-4e51-8672-f05b0ffe46b0%40googlegroups.com.
--
You received this message because you are subscribed to the Google Groups "Village Telco Development Community" group.
To unsubscribe from this group and stop receiving emails from it, send an email to village-telco-...@googlegroups.com.
To post to this group, send email to village-...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/village-telco-dev/c7a338b6-d95b-4317-b7e0-ccb0b7efb9fc%40googlegroups.com.
--
You received this message because you are subscribed to the Google Groups "Village Telco Development Community" group.
To unsubscribe from this group and stop receiving emails from it, send an email to village-telco-...@googlegroups.com.
To post to this group, send email to village-...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/village-telco-dev/606f65ad-9154-45f4-b514-91dd782cf294%40googlegroups.com.