question about spud.

[Dante Torres]

good afternoon, I have a NSM2 with Firmware Version: SEC-3_0-GA01 14.07 UBNT, I tried to configure it with the spud but I get the following error:
root @ UB-10: ~ # batctl VM Server
Error - The installed version and kernel module batctl Do not have vis support. The vis functionality
Has Been Moved to the userspace daemon '' alfred ''.
root @ UB-10: ~ #
I can install vis or should I look for another option?

[Song, Stephen]

Hi Dante,

Yes, I think Spud may officially now be simply too old for practical use.  For general network monitoring, I would consider running the snmp client on each MP2 and a networking monitoring agent like LibreNMS.  Nagio, Zabbix, Munin and others are also worthy alternatives.

If you wish to visualise the mesh, then I would look at LibreMap, Nodewatcher, or Nodeshot.

There is a list at http://wiki.villagetelco.org/Main_Page#Mesh_Network_Monitoring

Cheers... Steve

--
You received this message because you are subscribed to the Google Groups "Village Telco Development Community" group.
To unsubscribe from this group and stop receiving emails from it, send an email to village-telco-...@googlegroups.com.
To post to this group, send email to village-...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/village-telco-dev/f3436fc1-ceb2-4b16-a6b7-49bd38ffb0d4%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--

Steve Song

+1 902 529 0046

http://manypossibilities.net
http://nsrc.org

http://villagetelco.org

[Dante Torres]

hi steve.

ok, thanks for answering. I'll start experimenting with other software.

thank you.