Nano Kenbak

[Jersey Bob]

I am looking for a case or stand to display my
nano Kenbak. Looking for ideas. Regrads, Bob

[Charley Jones]

I could laser craft something for you.

Sent from my iPhone Xs!

On May 11, 2021, at 5:19 PM, Jersey Bob <k2q...@gmail.com> wrote:

I am looking for a case or stand to display my

nano Kenbak. Looking for ideas. Regrads, Bob

--
You received this message because you are subscribed to the Google Groups "uKenbak-1" group.
To unsubscribe from this group and stop receiving emails from it, send an email to ukenbak-1+...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/ukenbak-1/87417467-c213-46ad-9136-f07635e943f5n%40googlegroups.com.

[Mark Wilson]

Re a stand for the nano.

I had though about a "plate stand". This sort of thing:

Not sure how well it would work :-)

But I was working on a project with some laser cutting and tucked some extra bits in a corner:

(Black 3mm acrylic). Peeled and glued:

Standing:

cheers,

M

[famousd...@gmail.com]

Looks great.  I might have to fire up my laser give it a try.  

[MICHAEL GARDI]

A case is a great idea.  I printed this up today.

[Roger Linhart]

Cool! Would you be willing to share the .stl file for this?

[MICHAEL GARDI]

Sure no problem.  Here are the STL files.  I took another run at the stand as well.

Mike

You received this message because you are subscribed to a topic in the Google Groups "uKenbak-1" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/ukenbak-1/pCSvx43sJsI/unsubscribe.
To unsubscribe from this group and all its topics, send an email to ukenbak-1+...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/ukenbak-1/f88556c3-f055-4408-90fe-70c51dfcfb5an%40googlegroups.com.

[Roger Linhart]

I can't believe it took me four tries to get this to print correctly. The first time I discovered the firmware on the new 4.2.7 controller doesn't support pause at layer/height correctly. The second time I sliced the model into three layers, bottom, letters, top. The first two layers went well but the to top wasn't aligned correctly. The third time I was so focused on alignment I forgot to swap out the filament for the letters. Fourth time was the charm. Thanks for the .stl file Mike. :)

[Scott Lawrence]

Heyas all.  I liked this idea, but I wanted to be able to read the back of it, since I am not the Kenbak wizards that you all are. ;)

I started with Mike's file above, but I made some changes:

- openings added to the bottom so you can read the text

- 2mm taller to wrap around the board a little more

- a few small locking tabs were added so you can snap it around the board to hold it in place

- It's a few mm longer since the original it was too narrow to fit mine

- I also made a new stand from scratch based on the one in here, but a little bigger so i could fit my now-6mm tall uKenbak.

I'd like to throw the stl files up on thingiverse,  but as they're chopped up from your design, Mike, I want to get your permission first.  :)

STL and jpg files are attached.

Have fun y'all! :D

-s

On Fri, Sep 10, 2021 at 2:09 AM Roger Linhart <linh...@gmail.com> wrote:

I can't believe it took me four tries to get this to print correctly. The first time I discovered the firmware on the new 4.2.7 controller doesn't support pause at layer/height correctly. The second time I sliced the model into three layers, bottom, letters, top. The first two layers went well but the to top wasn't aligned correctly. The third time I was so focused on alignment I forgot to swap out the filament for the letters. Fourth time was the charm. Thanks for the .stl file Mike. :)

--
You received this message because you are subscribed to the Google Groups "uKenbak-1" group.
To unsubscribe from this group and stop receiving emails from it, send an email to ukenbak-1+...@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/ukenbak-1/af30716d-2cc2-4c4f-8180-c995271a86e6n%40googlegroups.com.

--

Scott Lawrence
yor...@gmail.com