New Class and laser cutter

[Roland von Kurnatowski III]

The laser cutter is down for the near while, a new lens has been ordered. Lexan was cut in it by a member (remember no lexan) and the lens suffered extensive damage making it unusable. I will update when it is repaired (3-5 days depending on shipping)

Also a one time workshop is going to be offered by George Krausse on tool and blade sharpening. This is limited to 8 people and would be a great opportunity for all those woodworkers who are still a little unsure on using manual and automated sharpening systems for optimal results.

checkout classes.txrxlabs.org if interested!

--

-Roland

[Charles Bornstein]

Any update on the laser cutter status?

Thanks

Charles

--
You received this message because you are subscribed to the Google Groups "Tx/Rx Labs" group.
To unsubscribe from this group and stop receiving emails from it, send an email to txrxlabs+u...@googlegroups.com.
To post to this group, send email to txrx...@googlegroups.com.
Visit this group at http://groups.google.com/group/txrxlabs.
For more options, visit https://groups.google.com/d/optout.