Writing to see if anyone would be interested in purchasing all my laser cutter parts, bits and pieces. This is something I started working on a long time ago and just never finished. The laser is based off of Bart Dring’s build found here. http://www.buildlog.net/
I built the frame from aluminum 80/20 as seen here with some laser-cut carriage pieces and v-groove rails.
http://i.imgur.com/GwSwrWP.jpg
http://i.imgur.com/Krr4zOz.jpg
http://i.imgur.com/O30cCuI.jpg
Including pretty much everything I have for the project, including all the motors, 3 20mm SI plated reflection mirrors, 1 20mm ZnSe focus lens , 40W CO2 laser tube, 40W PWM power supply, mirror mounts, and a brand new DSP CO2 Laser Cutting Engraving Machine LCD Motion Controller system MPC6515 with Laser Cut 5.3 and the license dongle. There are a bunch of other random parts that I’m happy to throw in like misc. bearings, surgical tubing, temp/flow sensor, etc.
http://i.ebayimg.com/images/g/2doAAOxyLchRu-4r/s-l1600.jpg
I also have aluminum panels that were water jet cut per the attached DXF. These panels should allow you to seal up the box. I have some various duct and vent pieces as well that I will throw in. Pretty much anything I ever bought for this can be yours.
I haven’t really thought about a price right now but I general know how much I have into this. I have no hopes of getting anything close to that, but I’d still like to make some of my money back.
Please let me know if you’re interested and I can itemize everything and come up with a firm price. All serious offers will be considered.
Regards,
Chris Holloway
The controller alone was over $500. I will put together a list of all the pieces and the original pricing for comparison.
Hi Chris,$500. LMK.Thanks,Jim Connelley
From: Chris Holloway <im.chris...@gmail.com>
To: txrx...@googlegroups.com
Sent: Tuesday, May 31, 2016 10:57 PM
Subject: [TX/RX Labs] Laser cutter parts and frame
--
You received this message because you are subscribed to the Google Groups "TXRX Labs" group.
To unsubscribe from this group and stop receiving emails from it, send an email to txrxlabs+u...@googlegroups.com.
To post to this group, send email to txrx...@googlegroups.com.
Visit this group at https://groups.google.com/group/txrxlabs.
For more options, visit https://groups.google.com/d/optout.