shop sound system

[mr jones]

hey all!

I rigged up a sound system in the front space of the shop.  There's a bluetooth adapther set up.  If you press the button on the top device (see attached, red arrow) to the right of the whiteboard, you can then pair with "Esinkin BT Adapter". If this becomes to cumbersome, as the adapter only remembers the last few devices, we can just to straight analog input (3.5mm).

also the wires are kinda janky, strung about.  I'll clean them up next week if some on doesn't beat me to it.  i'll bring in my staple gun and affix the cable to the bottom of the white board and bring in an extension cord to tidy up the power cables.

cheers,

-adj

[mr jones]

Hey again!

I didn't make it down to the shop tonight, so the wiring job on this will continue to be janky - sorry!

That said - is this getting any use?  Do folks like it?  Do we need a hardwired solution?  

Krux and Tony had asked about wiring in the projector.  Does any one know if it does a digital to analog conversion for HDMI -> 3.5mm?  We could just run a long audio cable from the projectors 3.5mm audio output into the sound system - likely putting another volume knob inline.

Lemme know!

cheers,

-adj

[Aakin Patel]

I was using it this afternoon via bluetooth, it worked really well. 

- Aakin

--
@synshop
https://synshop.org
---
You received this message because you are subscribed to the Google Groups "SYN Shop" group.
To unsubscribe from this group and stop receiving emails from it, send an email to synshop+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[mr jones]

yay!

N of 1 is good for now (N of 2 if we count Tim using it last week ;)

-adj