sage-5.0.beta10 SAGE_CHECK=yes on buildbot
Jeroen Demeyer
SAGE_CHECK=yes. These tests are done with sage-5.0.beta10.
Note that since #12579, Python's tests are disabled by default. Builds
were done in parallel (varying values of -j) and with the -k (continue
as much as possible after failures) option. After a failed test, I did
not try to continue the build.
* UW redhawk (Ubuntu 10-64)
sagetex failed test (file missing in the LaTeX installation):
! LaTeX Error: File `makecmds.sty' not found.
* UGA rosemary (RHEL 5.6 x86_64)
sagetex failed test, same as redhawk
* Skynet eno (Fedora 16 x86_64)
everything passed (the *only* system which managed!)
* Skynet lena (Fedora 16 x86_64)
cvxopt failed test due to #12742
* Skynet flavius (Fedora 16 x86_64)
cvxopt failed test due to #12742
* Skynet sextus (Fedora 16 x86_64)
cvxopt failed test due to #12742
* Skynet taurus (Fedora 16 x86_64)
build succeeded, but doctest errors (I haven't investigated):
sage -t --long -force_lib devel/sage/sage/calculus/riemann.pyx
Exception raised by doctesting framework. Use -verbose for details.
[21.6 s]
sage -t --long -force_lib devel/sage/sage/calculus/interpolators.pyx
Exception raised by doctesting framework. Use -verbose for details.
[23.7 s]
sage -t --long -force_lib devel/sage/sage/finance/time_series.pyx
Exception raised by doctesting framework. Use -verbose for details.
[49.5 s]
* Skynet cicero (Fedora 15 i686)
1) cvxopt failed test due to #12742
2) Segmentation faults in libm4rie tests:
make check-TESTS
make[4]: Entering directory
`/home/buildbot/build/sage/cicero-1/cicero_full/build/sage-5.0.beta10/spkg/build/libm4rie-20111004.p2/src'
/bin/sh: line 5: 28536 Segmentation fault (core dumped) ${dir}$tst
FAIL: test_trsm
/bin/sh: line 5: 28560 Segmentation fault (core dumped) ${dir}$tst
FAIL: test_elimination
[...]
mul: k: 9, minpoly: 0x211 m: 200, l: 20, n: 112
...................degree 150618896 not supported.
passed
[...]
mul: k: 150618896, minpoly: 0x000 m: 1, l: 1, n: 1 /bin/sh:
line 5: 28584 Aborted (core dumped) ${dir}$tst
FAIL: test_multiplication
[...]
testing k: 4, m: 217, n: 2 ............/bin/sh: line 5: 30784
Segmentation fault (core dumped) ${dir}$tst
FAIL: test_smallops
[...]
ple: k: 9, minpoly: 0x211 m: 200, n: 112, r: 111 .. degree 248
not supported.
passed
ple: k: 248, minpoly: 0x030 m: 1, n: 1, r: 1 /bin/sh: line
5: 30808 Aborted (core dumped) ${dir}$tst
FAIL: test_ple
3) PPL fails some tests:
make[5]: Entering directory
`/home/buildbot/build/sage/cicero-1/cicero_full/build/sage-5.0.beta10/spkg/build/ppl-0.11.2.p1/src/tests/MIP_Problem'
PASS: ascii_dump_load1
PASS: exceptions1
PASS: mipproblem1
tests failed: test08
FAIL: mipproblem3
======================================
1 of 4 tests failed
Please report to ppl-...@cs.unipr.it
======================================
[...]
make[5]: Entering directory
`/home/buildbot/build/sage/cicero-1/cicero_full/build/sage-5.0.beta10/spkg/build/ppl-0.11.2.p1/src/tests/Polyhedron'
tests failed: test20
FAIL: termination1
[...]
======================================
1 of 202 tests failed
Please report to ppl-...@cs.unipr.it
======================================
* Skynet cleo (RHEL 5.3 ia64)
GSL fails testsuite:
make check-TESTS
make[4]: Entering directory
`/home/buildbot/build/sage/cleo-1/cleo_full/build/sage-5.0.beta10/spkg/build/gsl-1.15.p0/src/ode-initval2'
make[4]: Warning: File `test' has modification time 0.079 s in the future
gsl: msbdf.c:1336: ERROR: msbdf_apply too large order change
-- order change -2
Default GSL error handler invoked.
/bin/sh: line 5: 25627 Aborted ${dir}$tst
FAIL: test
==================
1 of 1 test failed
==================
* Skynet iras (SUSE ES10 ia64)
GSL fails test, same as cleo
* UGent moufang (OSX 10.4 ppc32)
1) IML testsuite fails to link:
gcc -I/../src
-I/Users/buildbot/build/sage/moufang-1/moufang_full/build/sage-5.0.beta10/local/include
-I/Users/buildbot/build/sage/moufang-1/moufang_full/build/sage-5.0.beta10/spkg/build/iml-1.0.1.p14/src
-I. -g -O2 -o .libs/test-smallentry test_smallentry-test-smallentry.o
../src/.libs/libiml.dylib
-L/Users/buildbot/build/sage/moufang-1/moufang_full/build/sage-5.0.beta10/local/lib
-lm -L/usr/lib/ -lcblas -latlas
/Users/buildbot/build/sage/moufang-1/moufang_full/build/sage-5.0.beta10/local/lib/libgmp.dylib
/usr/bin/ld: can't locate file for: -lcblas
collect2: ld returned 1 exit status
make[4]: *** [test-smallentry] Error 1
2) R testsuite failed:
Testing examples for package 'tcltk'
/Users/buildbot/build/sage/moufang-1/moufang_full/build/sage-5.0.beta10/spkg/build/r-2.14.0.p2/src/bin/BATCH:
line 60: 28077 Abort trap ${R_HOME}/bin/R -f ${in} ${opts}
${R_BATCH_OPTIONS} >${out} 2>&1
Error: testing 'tcltk' failed
Execution halted
make[5]: *** [test-Examples-Base] Error 1
3) zn_poly extensive testsuite failed:
mpn_smp_basecase()... ok
mpn_smp_kara()... ok
mpn_smp()... ok
mpn_mulmid()... ok
zn_array_recover_reduce()... ok
zn_array_pack()... ok
zn_array_unpack()... ok
zn_array_mul_KS1()... ok
zn_array_mul_KS2()... ok
zn_array_mul_KS3()... ok
zn_array_mul_KS4()... ok
zn_array_sqr_KS1()... ok
zn_array_sqr_KS2()... ok
zn_array_sqr_KS3()... ok
zn_array_sqr_KS4()... ok
zn_array_mulmid_KS1()... ok
zn_array_mulmid_KS2()... ok
zn_array_mulmid_KS3()... ok
zn_array_mulmid_KS4()... ok
nuss_mul()... FAIL!
At least one test FAILED!
zn_poly failed to pass the extensive test suite
* UW bsd (OSX 10.6 x86_64)
PPL fails testsuite:
make check-TESTS
failed tests: test01
FAIL: watchdog1
====================================
1 of 1 test failed
Please report to bag...@cs.unipr.it
====================================
* hawk (OpenSolaris 06.2009-32)
libm4rie testsuite fails to build:
make[4]: Entering directory
`/export/home/buildbot/build/sage/hawk-1/hawk_full/build/sage-5.0.beta10/spkg/build/libm4rie-20111004.p2/src'
g++ -DHAVE_CONFIG_H -I. -I./src
-I/export/home/buildbot/build/sage/hawk-1/hawk_full/build/sage-5.0.beta10/local/include
-I/include -mmmx -msse -msse2 -msse3 -I/include -I/include -mmmx
-msse -msse2 -msse3 -MT test_trsm-test_trsm.o -MD -MP -MF
.deps/test_trsm-test_trsm.Tpo -c -o test_trsm-test_trsm.o `test -f
'tests/test_trsm.cc' || echo './'`tests/test_trsm.cc
g++ -DHAVE_CONFIG_H -I. -I./src
-I/export/home/buildbot/build/sage/hawk-1/hawk_full/build/sage-5.0.beta10/local/include
-I/include -mmmx -msse -msse2 -msse3 -I/include -I/include -mmmx
-msse -msse2 -msse3 -MT test_elimination-test_elimination.o -MD -MP
-MF .deps/test_elimination-test_elimination.Tpo -c -o
test_elimination-test_elimination.o `test -f 'tests/test_elimination.cc'
|| echo './'`tests/test_elimination.cc
g++ -DHAVE_CONFIG_H -I. -I./src
-I/export/home/buildbot/build/sage/hawk-1/hawk_full/build/sage-5.0.beta10/local/include
-I/include -mmmx -msse -msse2 -msse3 -I/include -I/include -mmmx
-msse -msse2 -msse3 -MT test_multiplication-test_multiplication.o -MD
-MP -MF .deps/test_multiplication-test_multiplication.Tpo -c -o
test_multiplication-test_multiplication.o `test -f
'tests/test_multiplication.cc' || echo './'`tests/test_multiplication.cc
g++ -DHAVE_CONFIG_H -I. -I./src
-I/export/home/buildbot/build/sage/hawk-1/hawk_full/build/sage-5.0.beta10/local/include
-I/include -mmmx -msse -msse2 -msse3 -I/include -I/include -mmmx
-msse -msse2 -msse3 -MT test_smallops-test_smallops.o -MD -MP -MF
.deps/test_smallops-test_smallops.Tpo -c -o
test_smallops-test_smallops.o `test -f 'tests/test_smallops.cc' || echo
'./'`tests/test_smallops.cc
tests/test_trsm.cc: In function ‘int test_mzed_trsm_upper_left(gf2e*,
rci_t, rci_t)’:
tests/test_trsm.cc:106: error: ‘__STRING’ was not declared in this scope
[...many more like this...]
* Skynet mark (SunOS 5.10-32)
Lots of failures, too many to look into details:
1) Error testing package boehm_gc-7.2.alpha6.p2
2) Error installing package libpng-1.2.35.p4
3) Error installing package glpk-4.44.p0
4) Error testing package givaro-3.2.13.rc1.p3
5) Error installing package gnutls-2.2.1.p6
Dan Drake
> For the first time ever, I built Sage on the buildbot with
> SAGE_CHECK=yes. These tests are done with sage-5.0.beta10.
>
> Note that since #12579, Python's tests are disabled by default. Builds
> were done in parallel (varying values of -j) and with the -k (continue
> as much as possible after failures) option. After a failed test, I did
> not try to continue the build.
>
> * UW redhawk (Ubuntu 10-64)
> sagetex failed test (file missing in the LaTeX installation):
> ! LaTeX Error: File `makecmds.sty' not found.
>
> * UGA rosemary (RHEL 5.6 x86_64)
> sagetex failed test, same as redhawk
On the Ubuntu machine, the package texlive-latex-extra must be
installed to get makecmds.sty. I don't have access to a RHEL or CentOS
machine, so I'm not sure which package it needs.
Dan
--
--- Dan Drake
----- http://mathsci.kaist.ac.kr/~drake
-------
Jeroen Demeyer
> * Skynet lena (Fedora 16 x86_64)
> cvxopt failed test due to #12742
>
> * Skynet flavius (Fedora 16 x86_64)
> cvxopt failed test due to #12742
>
> * Skynet sextus (Fedora 16 x86_64)
> cvxopt failed test due to #12742
On all these three systems, testing cvxopt again after installing
matplotlib was successful: all testsuites (except Python) passed,
ptestlong passed.