[ntl-9.8.1.p0] Tuning and building NTL.
[ntl-9.8.1.p0] make setup1
[ntl-9.8.1.p0] g++ -I../include -I. -march=native -O2 -g -fno-common -c MakeDescAux.c
[ntl-9.8.1.p0] /var/folders/w2/d76csvw138zgq0v8s64x5dh00000gq/T//ccvGKO5e.s:124:no such instruction: `vmovsd %xmm0, -16(%rsp)'
[ntl-9.8.1.p0] /var/folders/w2/d76csvw138zgq0v8s64x5dh00000gq/T//ccvGKO5e.s:259:no such instruction: `vxorpd %xmm0, %xmm0,%xmm0'
[ntl-9.8.1.p0] /var/folders/w2/d76csvw138zgq0v8s64x5dh00000gq/T//ccvGKO5e.s:264:no such instruction: `vaddsd (%rdi), %xmm0,%xmm0'
[ntl-9.8.1.p0] /var/folders/w2/d76csvw138zgq0v8s64x5dh00000gq/T//ccvGKO5e.s:274:no such instruction: `vxorpd %xmm0, %xmm0,%xmm0'
[ntl-9.8.1.p0] /var/folders/w2/d76csvw138zgq0v8s64x5dh00000gq/T//ccvGKO5e.s:295:no such instruction: `vfmadd132sd %xmm1, %xmm2,%xmm0'
[ntl-9.8.1.p0] /var/folders/w2/d76csvw138zgq0v8s64x5dh00000gq/T//ccvGKO5e.s:319:no such instruction: `vmovsd LC18(%rip), %xmm0'
[ntl-9.8.1.p0] /var/folders/w2/d76csvw138zgq0v8s64x5dh00000gq/T//ccvGKO5e.s:329:no such instruction: `vaddsd %xmm0, %xmm0,%xmm0'
[ntl-9.8.1.p0] /var/folders/w2/d76csvw138zgq0v8s64x5dh00000gq/T//ccvGKO5e.s:338:no such instruction: `vmovsd LC18(%rip), %xmm0'
[ntl-9.8.1.p0] make[4]: *** [setup1] Error 1
[ntl-9.8.1.p0] make[3]: *** [all] Error 2
[ntl-9.8.1.p0] Error building/tuning NTL.
[ntl-9.8.1.p0]
[ntl-9.8.1.p0] real 0m3.483s
[ntl-9.8.1.p0] user 0m1.598s
[ntl-9.8.1.p0] sys 0m1.910s
[ntl-9.8.1.p0] ************************************************************************
[ntl-9.8.1.p0] Error installing package ntl-9.8.1.p0
[ntl-9.8.1.p0] ************************************************************************
(followed by instructions to email sage-devel, etc...
Issue was encountered on second run of "make" first attempt produced this:
***************************************************
You are using OS X Lion (or later).
You are strongly advised to install Apple's latest Xcode
unless you already have it. You can install this using
the App Store. Also, make sure you install Xcode's
Command Line Tools -- see Sage's README.txt.
configure: error: "found MacPorts in /opt/local/bin/port. Either:
(1) rename /opt/local and /sw, or
(2) change PATH and DYLD_LIBRARY_PATH
(Once Sage is built, you can restore them.)
If you would like to try to build Sage anyway (to help porting),
export the variable 'SAGE_PORT' to something non-empty.
make[1]: *** [build/make/Makefile] Error 1
make: *** [all] Error 2
I updated Xcode and Command Line Tools per the README
and renamed /opt/local. I did not find any /sw and so ignored that
part of the instructions.