Laser cutter keypad/display replaced

10 views

Skip to first unread message

Ken Runner

unread,

May 27, 2016, 9:59:36 AM5/27/16

to 10BitWorks

The laser cutter keypad/display has been replaced. Unfortunately it arrive setup for Chinese, but I just spoke to Rabbit and here is the procedure to get it to display in English:

Press the menu button twice

Choose the third line on the display by using the left down arrow and then pressing enter

This should display a menu where English is one of the options so choose that and then hist ESC and we should be back in business...

Greg Bluntzer

unread,

May 27, 2016, 10:37:24 AM5/27/16

to 10BitWorks on behalf of Ken Runner

Nice. Thanks for fixing it

--
You received this message because you are subscribed to the Google Groups "10BitWorks" group.
To unsubscribe from this group and stop receiving emails from it, send an email to sa-hackerspac...@googlegroups.com.
To post to this group, send email to sa-hack...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/sa-hackerspace/fe90342a-eaa1-4505-95ec-b08259901522%40googlegroups.com.