Hard Poses

[MagWeb]

know, Reconstruct;e was made to do a 360° scan in one go.

But there may be some situations where the object does not give you the time to move your device 360° around.

I did some earlier test with the Kinect:

http://www.youtube.com/watch?v=BleZaEQeqkU&context=C4347cafADvjVQa1PpcFMiAOKPTaD5KoPvAq9kRPUULhWatCpVh9g=

Another Sunday, other tests:

Two angled mirrors (about 120°) behind the object (my little 12 year old daughter) and hard to keep poses.

ReconstructMe at a 2x2x2m volume.

Reflected results mirrored and cleaned in MeshMixer, fused in DAVID3:

Due to the mirrors I could minimize scanning time to a 1/3. The mirrored partial meshes are a bit worse, you've to do some  manual cleaning and postprocessing, but ReconstructMe results match better than any result I had with such a mirror cabinet setup.

Gunter

[Darnell Williams]

Brilliant.

[Darnell Williams]

On Sunday, March 25, 2012 5:04:49 PM UTC-7, MagWeb wrote:

[Misha]

nice...really inspirational....

Cheers,

Mike 

[Christoph Heindl]

Amazing! Guess who makes it onto gallery today... :)

Best,

Christoph

[MagWeb]

Glad you like it.

Here you can get a turntable .mov:

http://wikisend.com/download/139424/Poses.MOV.zip

PW: ReconstructMe

(link valid for 7 days)

[Misha]

examining your turntable, this technique is a great way to show gesture in form.... the low resolution model shows figure direction and expression very clearly...

Cheers,

Mike