alternatives to featherboards
aperkins61
Greetings,
I have seen alternative methods to featherboards in magazines but can't
remember where or exactly what. If anyone can offer suggestions or
information on where to find an article on this, I would greatly
appreciate it.
Thanks,
aperkins61
--
aperkins61
todd
news:aperkins...@diybanter.com...
Maybe Board Buddies?
http://www.rockler.com/ecom7/product_details.cfm?offerings_id=11262
todd
Pop`
Wow, are those overpriced!
mac davis
wrote:
I just ordered these:
http://www.leevalley.com/wood/page.aspx?c=2&p=55999&cat=1,42363,42356
looking forward to trying them out on the TS and maybe the band saw...
If I like them, they also sell just the "switches", the magnet and screw
assembly, without the feather board parts....
they look pretty cool for making jigs..
mac
Please remove splinters before emailing
willshak
I have these:
http://www.sears.com/sr/javasr/product.do?cat=Power+Tool+Accessories&pid=00903230000&vertical=TOOL&subcat=Table+Saw&BV_UseBVCookie=Yes
or
http://preview.tinyurl.com/2dj4ue
--
Bill
In Hamptonburgh, NY
To email, remove the double zeroes after @
ROY!
wrote:
>I just ordered these:
>
>http://www.leevalley.com/wood/page.aspx?c=2&p=55999&cat=1,42363,42356
>
>looking forward to trying them out on the TS and maybe the band saw...
>
>If I like them, they also sell just the "switches", the magnet and screw
>assembly, without the feather board parts....
>they look pretty cool for making jigs..
>
>
>mac
>
>Please remove splinters before emailing
I think you'll like them. I have one and use it whenever appropriate.
Ted Williams
>
> Greetings,
> I have seen alternative methods to featherboards in magazines but can'
> Thanks,
> aperkins6
> --
> aperkins61
I am associated with a new company, New Guilds, that is introducing an
entire line of stock support systems to be released about December or
January.
The systems are for bandsaws, table saws, jointers and router tables. The
heart of the systems are large one-way rollers both in wide and narrow
sizes and a freewheel roller tailored to resawing on the bandsaw and a s a
secondary roller used in series with the one-way rollers. All parts of the
support systems are interchangeable. The systems are not cheap, but being
built of structural aluminum, stainless steel and large high quality
bearings and hardware, the tools are built to last a lifetime use.
I have I have extensively used the systems, as have several of what I call
professional amateurs, that are going to market. They are strong, set-up
in seconds, safe, and offer a usability that far exceeds anything else.
I have attached several photos of these systems. If you are interested in
more information please email me your name, address woodworking interest
and email address at el...@newguilds.com. And you will receive our catalog
and be notified of the videos from a number of national woodworks as they
are released on the net.
My name is Ted Williams. I have 50+ years in the fine woodworking and the
millwork crafts. I have built furniture, historical houses (new and
Restoration) as well as fine arts pieces. I was the primary designer and
lead craftsman at my firm before retiring. My work may be seen at
www.newguilgwoodworking.com.
[IMG]http://www.homeownershub.com/img/4o[/IMG]
[IMG]http://www.homeownershub.com/img/4p[/IMG]
[IMG]http://www.homeownershub.com/img/4q[/IMG]
--
Mike Marlow
>
> I am associated with a new company, New Guilds, that is introducing an
> entire line of stock support systems to be released about December or
> January.
not a very good way to develop good will.
--
-Mike-
mmarlo...@windstream.net
Gramps' shop
Take a few minutes to look at the vids. This is pretty cool stuff.
Larry