Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

Looking for schematic.Kortek KTN-1401

29 views
Skip to first unread message

Ronald

unread,
Nov 3, 2009, 6:38:45 PM11/3/09
to
I'm looking for a schematic for a KTN-1401 Kortek Monitor. My monitor
works ok but its WAY too wide. I'm testing caps now... but would love
a schematic for reference.

Ken Layton

unread,
Nov 3, 2009, 6:52:21 PM11/3/09
to
http://www.casinotech.com/TechDox.html

KT-1401N is in there.

Ronald

unread,
Nov 5, 2009, 3:28:12 PM11/5/09
to
On Nov 3, 6:52 pm, Ken Layton <KLayton...@aol.com> wrote:
> http://www.casinotech.com/TechDox.html
>
> KT-1401N is in there.

That link is dead. They are working on the website.

Ken Layton

unread,
Nov 5, 2009, 6:43:09 PM11/5/09
to
Funny, this works:

http://www.casinotech.com/files/KT1401N_Service_Manual.pdf

Ronald

unread,
Nov 5, 2009, 11:59:59 PM11/5/09
to
On Nov 5, 6:43 pm, Ken Layton <KLayton...@aol.com> wrote:
> Funny, this works:
>
> http://www.casinotech.com/files/KT1401N_Service_Manual.pdf

That works perfectly! Thanks!

Ronald

unread,
Nov 8, 2009, 5:00:11 PM11/8/09
to

Now I got the schematic. Hard to read.. to chunky as I would say...
Can anyone guide me in the direction on what to check for my problem.
The width is too wide. I've changed a few suspect capacitors with new
ones, and changed the TDA2595, and very little change. Anyhelp
would be great. if I was a wells gardner or g07 I have no problem ,
just with these damn kortek monitors.

Ken Layton

unread,
Nov 8, 2009, 10:39:23 PM11/8/09
to
it's old enough that I would recap it.

kelly

unread,
Nov 9, 2009, 12:08:18 AM11/9/09
to
Ken Layton wrote:
> it's old enough that I would recap it.
I've sent you a clear copy.

Enjoy!

cnlmoore

unread,
Nov 9, 2009, 8:33:39 AM11/9/09
to

Could you share that clear copy with the masses, please? Thanks

Chris

kelly

unread,
Nov 9, 2009, 10:52:54 AM11/9/09
to
I emailed it to you Chris.
I'm not sure how to put up a link for it or anything so I'll leave it in
your hands :)

Kelly

0 new messages