Big Laser - Slow Cutting

17 views
Skip to first unread message

Yossi

unread,
May 5, 2016, 2:57:32 AM5/5/16
to Reading Hackspace
I used the big laser to cut 3mm acrylic, had some trouble and eventually used 6mm/sec. This was in the centre of the bed, the output according to the gauge was 28A.

Is it just me, tube tired, out of focus?

Ryan .

unread,
May 5, 2016, 3:39:53 AM5/5/16
to reading-...@googlegroups.com

Tube probably put of focus, but will price new one just in case.

They have a shelf life, so best to order when necessary rather than keep in stock.

Will do some maintenance on Sunday too.

R

On 5 May 2016 07:57, "Yossi" <jos...@gmail.com> wrote:
I used the big laser to cut 3mm acrylic, had some trouble and eventually used 6mm/sec. This was in the centre of the bed, the output according to the gauge was 28A.

Is it just me, tube tired, out of focus?

--
You received this message because you are subscribed to the Google Groups "Reading Hackspace" group.
To unsubscribe from this group and stop receiving emails from it, send an email to reading-hacksp...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Reply all
Reply to author
Forward
0 new messages