Pandaboard ES Rev 3 problem with porting Ubuntu

[Anway Mukherjee]

Hello All,

I recently bought the pandaboard ES Rev 3 development board. I have few queries regarding the booting process. Here are the steps I have followed till now:

1. Got the prebuilt ubuntu binaries package
2. wrote it on a SD card(32 GB 80mb/s) in Ubuntu environment
3. plugged in the sd card in the slot provided in the board
4. attached HDMI to dvi-d adapter for monitor
5. attached usb mouse
6. plugged in the 5V power supply

The status2 LED is glowing properly but I am not getting any output on the monitor screen. I am assuming the boot process is not happening.
Do I absolutely need to attach the serial to usb adapter to another machine to configure the board? am I missing something here?
 please help

-Anway

[Raul Piper]

Get the minicom output for more clarity on the issue you are facing.
Bte google Robert Nelson pandaboard linux on arm and follow the instructions.Have agood luck.!!
I have no problem in booting PB with ubuntu,android,debian etc etc.

--
You received this message because you are subscribed to the Google Groups "pandaboard" group.
To unsubscribe from this group and stop receiving emails from it, send an email to pandaboard+...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[Bhupendra Pawar]

Yes you should debug further by uart and check whether boot loader or kernel has any issue.

--