Darwin Callingpoints Alterations

[randha...@gmail.com]

Hi,

I'm trying to figure out how a removal of a stop is seen on an xml file?

for example, the original file would have the schedules as below:

<uR updateOrigin="Tyrell">
<schedule rid="201507270016110" uid="P03526" trainId="2O53" ssd="2015-08-10" toc="GW">
<sc:OR tpl="RDNG4AB" act="TB" ptd="21:34" wtd="21:34" />
<sc:PP tpl="RDNGSJN" wtp="21:36" />
<sc:PP tpl="ERLY" wtp="21:38" />
<sc:IP tpl="WOKNGHM" act="T" pta="21:42" ptd="21:43" wta="21:42" wtd="21:43" />
<sc:IP tpl="CRWTHRN" act="T" pta="21:48" ptd="21:48" wta="21:47" wtd="21:48" />
<sc:IP tpl="SNDHRST" act="T" pta="21:51" ptd="21:52" wta="21:51" wtd="21:52" />
<sc:IP tpl="BCKWATR" act="T" pta="21:55" ptd="21:55" wta="21:54" wtd="21:55" />
<sc:IP tpl="FRBRNTH" act="T" pta="21:59" ptd="22:00" wta="21:59" wtd="22:00" />
<sc:IP tpl="NTHCAMP" act="T" pta="22:03" ptd="22:04" wta="22:03" wtd="22:04" />

<sc:PP tpl="EARLSWD" wtp="22:54" />
<sc:DT tpl="GTWK" act="TF" pta="23:04" wta="23:02" />
</schedule>
</uR>

If an update was to be received with a removal of a stop would it look like this, the point being removed completely?

<uR updateOrigin="Tyrell">
<schedule rid="201507270016110" uid="P03526" trainId="2O53" ssd="2015-08-10" toc="GW">
<sc:OR tpl="RDNG4AB" act="TB" ptd="21:34" wtd="21:34" />
<sc:PP tpl="RDNGSJN" wtp="21:36" />
<sc:PP tpl="ERLY" wtp="21:38" />

<sc:IP tpl="CRWTHRN" act="T" pta="21:48" ptd="21:48" wta="21:47" wtd="21:48" />
<sc:IP tpl="SNDHRST" act="T" pta="21:51" ptd="21:52" wta="21:51" wtd="21:52" />
<sc:IP tpl="BCKWATR" act="T" pta="21:55" ptd="21:55" wta="21:54" wtd="21:55" />
<sc:IP tpl="FRBRNTH" act="T" pta="21:59" ptd="22:00" wta="21:59" wtd="22:00" />
<sc:IP tpl="NTHCAMP" act="T" pta="22:03" ptd="22:04" wta="22:03" wtd="22:04" />

<sc:PP tpl="EARLSWD" wtp="22:54" />
<sc:DT tpl="GTWK" act="TF" pta="23:04" wta="23:02" />
</schedule>
</uR>


What I am assuming is it will be removed, as I have done in the example above "<sc:IP tpl="WOKNGHM" act="T" pta="21:42" ptd="21:43" wta="21:42" wtd="21:43" />" from the schedule

[Peter Hicks]

Hello

I don't think a timing point will normally be removed - what's your thinking here?

If a stop at a location is cancelled, there will be a 'cancelled' flag.  If the train's re-routed, I think there will still be timing points in for the original route of the train, but those may be cancelled (so you can call up the departure board for the original station and know the train's been cancelled).

Kind regards,

Peter

 

--
You received this message because you are subscribed to the Google Groups "A gathering place for the Open Rail Data community" group.
To unsubscribe from this group and stop receiving emails from it, send an email to openraildata-t...@googlegroups.com.
To post to this group, send an email to openrail...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[randha...@gmail.com]

[randha...@gmail.com]

On Thursday, 13 August 2015 16:48:27 UTC+1, Peter Hicks wrote:

Peter I'm thinking the same, timing point are not removed but marked as cancelled flag. But I will keep my eye open this matter. thanks

[randha...@gmail.com]

I think i found a case where a timing point is removed:

<?xml version="1.0" encoding="UTF-8"?><Pport xmlns="http://www.thalesgroup.com/rtti/PushPort/v12"
xmlns:ns2="http://www.thalesgroup.com/rtti/PushPort/Schedules/v1"
ts="2015-09-28T11:32:53.0856998+01:00" version="12.0">
<uR updateOrigin="Tyrell">
<schedule rid="201509281185265" ssd="2015-09-28" toc="SE" trainId="2H33" uid="W27074">
<ns2:OR act="TB" can="true" ptd="11:33" tpl="CANONST" wtd="11:33"/>
<ns2:PP can="true" tpl="BORMRKJ" wtp="11:35"/>
<ns2:OR act="TB" planAct="T " pta="11:36" ptd="11:37" tpl="LNDNBDE" wta="11:36" wtd="11:37"/>
<ns2:PP tpl="NKENTEJ" wtp="11:41"/>
<ns2:IP act="T " pta="11:42" ptd="11:43" tpl="NWCROSS" wta="11:42" wtd="11:43"/>
<ns2:PP tpl="STJOHNS" wtp="11:44:30"/>
<ns2:PP tpl="LEWISHM" wtp="11:45"/>
<ns2:PP tpl="PKBGJN" wtp="11:45:30"/>
<ns2:PP tpl="HTHRGRN" wtp="11:48"/>
<ns2:PP tpl="GRVPK" wtp="11:50"/>
<ns2:PP tpl="ELMW" wtp="11:51"/>
<ns2:PP tpl="CHSLHRS" wtp="11:52"/>
<ns2:PP tpl="PETSWDJ" wtp="11:53"/>
<ns2:PP tpl="PETSWD" wtp="11:54"/>
<ns2:IP act="T " pta="11:55" ptd="11:56" tpl="ORPNGTN" wta="11:55" wtd="11:56"/>
<ns2:PP can="true" tpl="CHLSFLD" wtp="11:57"/>
<ns2:IP act="T " pta="11:57" ptd="11:57" tpl="CHLSFLD" wta="11:57" wtd="11:57"/>
<ns2:PP can="true" tpl="KNCKHLT" wtp="11:58"/>
<ns2:IP act="T " pta="11:58" ptd="11:58" tpl="KNCKHLT" wta="11:58" wtd="11:58"/>
<ns2:IP act="T " pta="11:59" ptd="11:59" tpl="DTNG" wta="11:59" wtd="11:59"/>
<ns2:PP can="true" tpl="DTNG" wtp="12:02"/>
<ns2:IP act="T " pta="12:05" ptd="12:05" tpl="SVNOAKS" wta="12:04:30" wtd="12:05:30"/>
<ns2:IP act="T " pta="12:11" ptd="12:11" tpl="HLDNBRO" wta="12:11" wtd="12:11:30"/>
<ns2:DT act="TF" planAct="T " pta="12:15" ptd="12:17" tpl="TONBDG" wta="12:15" wtd="12:17"/>
<ns2:PP can="true" tpl="SMHLTUN" wtp="12:19"/>
<ns2:IP act="T " can="true" pta="12:23" ptd="12:23" tpl="HBROOMS" wta="12:23" wtd="12:23:30"/>
<ns2:PP can="true" tpl="TUNWTJN" wtp="12:25"/>
<ns2:DT act="TF" can="true" pta="12:27" tpl="TUNWELL" wta="12:27"/>
<ns2:cancelReason>179</ns2:cancelReason>
</schedule>
</uR>
</Pport>

to

<?xml version="1.0" encoding="UTF-8"?><Pport xmlns="http://www.thalesgroup.com/rtti/PushPort/v12"
xmlns:ns2="http://www.thalesgroup.com/rtti/PushPort/Schedules/v1"
ts="2015-09-28T11:40:35.1272903+01:00" version="12.0">
<uR updateOrigin="Workstation">
<schedule rid="201509281185265" ssd="2015-09-28" toc="SE" trainId="2H33" uid="W27074">
<ns2:OR act="TB" ptd="11:33" tpl="CANONST" wtd="11:33"/>
<ns2:PP tpl="BORMRKJ" wtp="11:35"/>
<ns2:IP act="T " pta="11:36" ptd="11:37" tpl="LNDNBDE" wta="11:36" wtd="11:37"/>
<ns2:PP tpl="NKENTEJ" wtp="11:41"/>
<ns2:IP act="T " pta="11:42" ptd="11:43" tpl="NWCROSS" wta="11:42" wtd="11:43"/>
<ns2:PP tpl="STJOHNS" wtp="11:44:30"/>
<ns2:PP tpl="PKBGJN" wtp="11:45:30"/>
<ns2:PP tpl="HTHRGRN" wtp="11:48"/>
<ns2:PP tpl="GRVPK" wtp="11:50"/>
<ns2:PP tpl="CHSLHRS" wtp="11:52"/>
<ns2:PP tpl="PETSWDJ" wtp="11:53"/>
<ns2:IP act="T " pta="11:55" ptd="11:56" tpl="ORPNGTN" wta="11:55" wtd="11:56"/>
<ns2:IP act="T " pta="12:05" ptd="12:05" tpl="SVNOAKS" wta="12:04:30" wtd="12:05:30"/>
<ns2:IP act="T " pta="12:11" ptd="12:11" tpl="HLDNBRO" wta="12:11" wtd="12:11:30"/>
<ns2:IP act="T " pta="12:15" ptd="12:17" tpl="TONBDG" wta="12:15" wtd="12:17"/>
<ns2:PP tpl="SMHLTUN" wtp="12:19"/>
<ns2:IP act="T " pta="12:23" ptd="12:23" tpl="HBROOMS" wta="12:23" wtd="12:23:30"/>
<ns2:PP tpl="TUNWTJN" wtp="12:25"/>
<ns2:DT act="TF" pta="12:27" tpl="TUNWELL" wta="12:27"/>
</schedule>
</uR>
</Pport>

What is a workstation updated?