Receiving "actual arrival time" in TS element for a cancelled additional stop

[zeinab....@gmail.com]

Hello,

We received the following Darwin schedule change where SCTSTNH is in fact an additional point which was added previously as the new destination for the service:


<schedule uid="G97846" trainId="2H06" toc="SR" ssd="2015-11-09" rid="201511090035794">

<ns2:OR wtd="07:10" tpl="HLNSBRC" ptd="07:10" act="TB"/>

<ns2:IP wtd="07:13" tpl="CRGDRN" ptd="07:13" act="T " wta="07:12:30" pta="07:13"/>

<ns2:PP tpl="CRGDRNJ" wtp="07:13:30"/>

<ns2:IP wtd="07:18:30" tpl="CDRS" ptd="07:18" act="T " wta="07:18" pta="07:18"/>

<ns2:IP wtd="07:23:30" tpl="DLREOCH" ptd="07:23" act="T " wta="07:23" pta="07:23"/>

<ns2:IP wtd="07:25" tpl="DMBRTNC" ptd="07:25" act="T " wta="07:24:30" pta="07:25"/>

<ns2:IP wtd="07:27" tpl="DMBRTNE" ptd="07:27" act="T " wta="07:26:30" pta="07:27"/>

<ns2:IP wtd="07:35" tpl="DALMUIR" ptd="07:35" act="T " wta="07:34" pta="07:34"/>

<ns2:PP tpl="CLYBANK" wtp="07:36:30"/>

<ns2:DT tpl="YOKER" act="TF" wta="07:37" pta="07:37"/>

<ns2:PP tpl="YOKER" wtp="07:37:30" can="true"/>

<ns2:PP tpl="GSCD" wtp="07:38:30" can="true"/>

<ns2:PP tpl="SCTSTNH" wtp="07:39" can="true"/>

<ns2:DT tpl="SCTSTNH" act="TF" wta="07:39" pta="07:39" can="true"/>
.
.
.
<ns2:DT tpl="EDINBUR" act="TF" wta="09:17" pta="09:17" can="true"/>

<ns2:cancelReason>170</ns2:cancelReason>

</schedule>


And then straight after this schedule change we got the following TS element which contains an actual arrival time for the cancelled SCTSTNH stop, essentially reporting a delay:

-<TS uid="G97846" ssd="2015-11-09" rid="201511090035794">

<ns3:LateReason>170</ns3:LateReason>
.
.
.
-<ns3:Location tpl="SCTSTNH" wtp="07:39">

<ns3:pass src="TD" at="07:52"/>

<ns3:plat platsrc="A" platsup="true" cisPlatsup="true">1</ns3:plat>

</ns3:Location>


-<ns3:Location tpl="SCTSTNH" wta="07:39" pta="07:39">

<ns3:arr src="TRUST" at="07:51" srcInst="Manu"/>

</ns3:Location>

<ns3:Location tpl="HYNDLEJ" wtp="07:43"/>
.
.
.
</TS>

None of the other cancelled stops and passing points have actual times in their TS element, so I was wondering if this is expected behavior?

Many thanks
Zeinab