ns3 has an implementation of 802.11s
-----Mensaje original-----
From: Manaswi
Sent: Tuesday, May 24, 2011 2:24 PM
To: omnetpp
Subject: [Omnetpp-l] 802.11s in Omnetpp
Hello all,
Thank you
--
You received this message because you are subscribed to the Google Groups
"omnetpp" group.
To post to this group, send email to omn...@googlegroups.com.
To unsubscribe from this group, send email to
omnetpp+u...@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/omnetpp?hl=en.
I don’t’ have immediate plan to implement the full 802.11s stack, the routing and forwarding functionality is enough for my research in this moment. I don’t need other functionalities like authentication
802.11s is not implemented, but you can simulated WMN in the level 2 the routing (HWMP) and forwarding mechanism are implemented.
ns3 has an implementation of 802.11s
-----Mensaje original----- From: Manaswi
Sent: Tuesday, May 24, 2011 2:24 PM
To: omnetpp
Subject: [Omnetpp-l] 802.11s in Omnetpp
Hello all,
Has 802.11s been implemented in omnetpp? If not, which other
simulators support 802.11s standard?
Thank you
--
You received this message because you are subscribed to the Google Groups "omnetpp" group.
To post to this group, send email to omn...@googlegroups.com.
To unsubscribe from this group, send email to mailto:omnetpp%2Bunsu...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/omnetpp?hl=en.
--
You received this message because you are subscribed to the Google Groups "omnetpp" group.
To post to this group, send email to omn...@googlegroups.com.
To unsubscribe from this group, send email to mailto:omnetpp%2Bunsu...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/omnetpp?hl=en.
The source code is in
https://github.com/inetmanet/inetmanet/tree/master/src/experimental
-----Mensaje original-----
From: Manaswi
Sent: Thursday, May 26, 2011 6:52 AM
To: omnetpp
Subject: [Omnetpp-l] Re: 802.11s in Omnetpp
>802.11s is not implemented, but you can simulated WMN in the level 2 the
>routing (HWMP) and forwarding mechanism are implemented.
Hello Alfonso,
Can you please tell me where can I find the implementation you
mentioned i.e.layer 2 routing (HWMP) and forwarding mechanism for WMN
simulation?
Thank you very much
Regards,
Manaswi
On May 24, 8:44 pm, Alfonso Ariza Quintana <aariza...@hotmail.com>
wrote:
> I don�t� have immediate plan to implement the full 802.11s stack, the
> routing and forwarding functionality is enough for my research in this
> moment. I don�t need other functionalities like authentication
Hey Alfonso !
The HWMP is the implementation of NS3, the forwarding mechanism is based in the four address method.
The packet has the origin and destination address, and the address of the next hop, every node change the address to the next. It is the mechanism that is proposal in 802.11s
--
You received this message because you are subscribed to the Google Groups "OMNeT++ Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to omnetpp+u...@googlegroups.com.
Visit this group at http://groups.google.com/group/omnetpp.
For more options, visit https://groups.google.com/d/optout.
You received this message because you are subscribed to a topic in the Google Groups "OMNeT++ Users" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/omnetpp/FOEzph0qXWM/unsubscribe.
To unsubscribe from this group and all its topics, send an email to omnetpp+u...@googlegroups.com.
I haven’t compare the performance, the advantage of to use the MPLS like protocol is that it allows source routing and traffic engineering, you can distribute the traffic between different paths, but if you want really to take advantage of traffic engineering it is necessary multiples interface in orthogonal channels, with only a channel it is difficult due to the intra channel interferences.