I can help with lifting and carrying and driving on Thursday (till 4pm) or Friday (all day) if needs be; not done any 3D printing yet though!
--
You received this message because you are subscribed to the Google Groups "Norwich Hackspace" group.
To unsubscribe from this group and stop receiving emails from it, send an email to norwich-hacksp...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
If you still have any of the SD cards from the castle and could get one to Hackspace tomorrow I could put a set of print files together. There are quite a few Easter things on Thingiverse which we could try out, to be topical but it would be a good idea if I could send them to you for test prints first to make sure we aren’t putting dodgy ones on the SD card.
When we did the printing at the castle last time we used the car park on the mound for dropping off stuff. Not sure we would be permitted to leave cars there though as it get a bit busy, especially at weekends.
Jay this is at The Forum not at the Castle. There is an unloading bay though There are also some instructions which i will look up. In haste Marion
Ah, there is a car park underneath then, although it fills up very quickly and isnt cheap. Access via bethelstreet.
I can't do much to help due to uni, work and NorDevCon, but i can do a bit of troubleshooting Monday to Wednesday if printer issues arise ala what we did at the castle.
--
--
Dan
Brian what colours do you have? Marion
The semi avoiding robot can go as well if someone will take it.
Dan
I picked up the blue and yellow from Hackspace on Monday - maybe a third of a reel each
--
--
Brian, when you have optimised the dragon and egg prints could you send me the gcode files as I am putting together an SD card of prints for the forum staff to use in the week.
Likewise if anyone else has any suitable print files to add
What diameter filament do the printers take? I have some 1.75 in different colors.
Attached a thicker bookmark, added 0.6mm so should be 1.2mm thick overall at the bottom and 2mm at the top, Not sure if it will still flex enough though, I copied the original thickness off a Thingverse design. The 0.6mm thickness is surprisingly flexible, attempts where made Monday to snap it!
How are things going for volunteers during the week? I can be in the Library during the week (doing 3D design stuff on the laptop for my Birdbox project so mutually beneficial!) except Tuesday 23rd, if maybe Jay or someone could help explain setup on Friday 20th and/or Monday 22nd?
--
You received this message because you are subscribed to the Google Groups "Norwich Hackspace" group.
To unsubscribe from this group and stop receiving emails from it, send an email to norwich-hacksp...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.