I just upgraded to Windows 2000 and can't get the ColdFusion server that
came on the NOF 4.01 CD to run. It worked perfect on my old windows 95
machine. When I try to access the CF Administrator I get an error page. No
coldfusion page will open. I've uninstalled and reinstalled several
times.Can't seem to figure it out. I hope someone here can help. The errors
are listed below. I have the IIS server installed. One good thing is NOF
runs SEVERAL times faster with Windows 2000!
Error Diagnostic Information
Error occurred while attempting to open service.
Windows NT error number 1060 occurred.
Error Diagnostic Information
An error occurred while attempting to establish a connection to the service.
The most likely cause of this problem is that the service is not currently
running. You can use the 'Services' Control Panel to verify that the service
is running and to restart it if necessary.
Windows NT error number 2 occurred.
If anyone can help I'd appreciate it.
Thanks,
Joe Hayter
I hope this helps.
--
Regards,
Erica Lewis
NetObjects Technical Support
Thank you,
Joe Hayter
"Erica Lewis" <newsgrou...@netobjects.com> wrote in message
news:395BC5E9...@netobjects.com...
"Erica Lewis" <newsgrou...@netobjects.com> wrote in message
news:395CFCA5...@netobjects.com...
Thanks,
Joe Hayter
"Joseph Barron" <jba...@ameritech.net> wrote in message
news:8jl8bl$ru...@news.netobjects.com...
I went to Allaire's site and downloaded the 4.01 Update and that did the
trick.
I went to Allaire's site and downloaded the 4.01 Update and that did the
trick.
Joe Hayter
"Erica Lewis" <newsgrou...@netobjects.com> wrote in message
news:395CFCA5...@netobjects.com...
> Dear Joe,
> I'm not sure, you will have the check with Allaire but I think that the
Cold
> Fusion server 4.0 won't work with the Windows 2000 IIS web server. Please
find
> out and let me know. Thank you.
>
> --
> Regards,
> Erica Lewis
> NetObjects Technical Support
>
>
> Joe Hayter wrote:
>
> > Hi Erica,
> > No I don't have Personal Web Server on the Windows 2000 machine. I have
the
> > IIS server that comes with Windows 2000 Professional. It worked great on
> > Windows 95 with PWS. Any other suggestion?
> >
> > Thank you,
> > Joe Hayter
> >
> > "Erica Lewis" <newsgrou...@netobjects.com> wrote in message
> > news:395BC5E9...@netobjects.com...
> > > Dear Joe,
> > > I know this is a basic question but did you reinstall Personal Web
Server
> > on
> > > your machine that you installed Windows 2000? Cold Fusion server needs
PWS
> > to
> > > run properly. Beyond that you will need to talk to Allaire about your
Cold
> > > Fusion server. They provide support for the server. Their address is:
> > > http://www.allaire.com/support
> > >
> > > I hope this helps.
> > >
> > > --
> > > Regards,
> > > Erica Lewis
> > > NetObjects Technical Support
> > >
> > >
> > > Joe Hayter wrote:
> > >
> > > > Hello,
> > > >
> > > > I just upgraded to Windows 2000 and can't get the ColdFusion server
that
Windows 2000 is revamped NT without the registry. It uses ACTIVE DIRECTORY
which is not compatible with the Old NT. So to make a long story stupid....
Software that was written for NTs will not install properly on Windows 2000
since there is no registry to write to like the old NT OS. You have to buy
all new software that is written for Windows 2000.
I my case I wiped out Windows 2000 and went back to the old NT software.
Steve Pruner
"Joe Hayter" <jlha...@jthnet.com> wrote in message
news:8jgdcf$gd...@news.netobjects.com...
It's working good now since I downloaded the 4.01 update. I went from
windows 95 to windows 2000 and so far almost all my software works better.
I've had to down load a couple of new drivers and the update for ColdFusion
and that's about it. Thanks for your reply.
Thanks,
Joe Hayter
"Steven J. Pruner" <sjpr...@ovnet.com> wrote in message
news:8l5jc6$hn...@news.netobjects.com...