So, what have I got.....

[Kerry Borgne]

Finally getting around to digging in the various boxes that have accumulated over the years and have come across a few things that I have no idea what there were for.. why I bought them, what I was planning..................

 Amongst them was this 'kit' pictured above . It consists of two un-drilled circuit boards various resistors/caps transistors and ICs etc.  I have NO idea what it could be.  It was purchased from Claus Urbach way back in 2003 (at least that's the date on the package it came in.

The Ics are: 16F876-04/SP, uPB74141d and KM155N01 (not sure of the last as the marking has faded) The board has OZ2CPU 1.03 etched on it.

There is no documentation included with the 'kit'.  Does anyone have any idea as to what I bought? and where I can locate some info to help put this together?

Thanks,

Kerry

[n1ist]

Looks like this clock:

http://www.webx.dk/oz2cpu/clock/nixie-clock2x3.htm

/mike

[Dan Harboe Burer]

If noone else helps I can try to “dig deep” in my archives. I actully built that kit as my first clock back then. – With the same kit! So: it IS a nixieclcok kit (with a PSU board) – where you have to wire the multiplexing directly on the sockets..

I should have the manual somewhere...

 

OZ2CPU is a friend of mine. I will try to contact him and hear if he still has the old documentation for your kit.

 

Regards

Dan

--
You received this message because you are subscribed to the Google Groups "neonixie-l" group.
To unsubscribe from this group and stop receiving emails from it, send an email to neonixie-l+...@googlegroups.com.
To post to this group, send email to neoni...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/84ed90e6-88fe-4f4b-9e97-cd728b99b28c%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[Dan Harboe Burer]

Yep, that’s the clock all right ..

 

Dan

 

From: n1ist

Sent: Monday, March 23, 2015 8:51 PM

To: neoni...@googlegroups.com

--
You received this message because you are subscribed to the Google Groups "neonixie-l" group.
To unsubscribe from this group and stop receiving emails from it, send an email to neonixie-l+...@googlegroups.com.
To post to this group, send email to neoni...@googlegroups.com.

To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/e512bc67-87ef-4025-b25d-951846e69196%40googlegroups.com.

[Kerry Borgne]

Thanks guys.. really appreciated..  Is there some reason that all I am seeing for your image post is a tiny smiley?

Kerry

[Kerry Borgne]

I'd appreciate it IF someone has them, if they could post the docs/assembly information?

Thanks,

Kerry