www.ebay.com/itm/221478177909
NP-10 Tiny Nixie Power Supply for IN-18, IN-14 and other Tubes [12V~250V] Input: 3-28VDC Output:12-250VDC (Adjust by single resister, default:180VDC) Efficiency: 87% (180V@35mA, Vin=12V) Power out: 15W (Max Vin=28V) Output setting:Programmed with a single resistor to ground Module size: 20mm*16mm*8.5mm Table 1: Electrical Specifications Specification check via ebay Notes: 1. Include input reverse polarity protection is provide. 2. Enable pin can floating the pin or connect to MCU. By using this pin for clock synchronization. 3. Output of module is short circuit protected via pulse-pulse current limiting. 100% test and assembly Notes: shipping only one module(Fig4), not include tubes and other parts. |
|
VFD/NIXIE/OLED DIY |