sane hal and configuring a Canon CanoScan N650U
Robert McKenzie
I am just wondering if anyone has any ideas as to who to get such a
combination working as I have despite much effort, not been able to do so.
The device is visible, the permissions for the device appear to be correct
with the details as follows.
Using sane-find-scanners I get the following
found USB scanner (vendor=0x04a9, product=0x2206) at /dev/uscanner0
Then when I try the next stage of trying scanimage -L, all I get is core
dumping.
I have edited the relevant files in /usr/local/etc/sane.d but still no
luck although hal also has the scanner listed and I was wondering if that
was perhaps part of the problem.
udi = '/org/freedesktop/Hal/devices/usb_device_4a9_2206_noserial'
freebsd.device_file = '/dev/uscanner0' (string)
freebsd.driver = 'uscanner' (string)
freebsd.unit = 0 (0x0) (int)
info.bus = 'usb_device' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_1039_7002' (string)
info.product = 'CanoScan' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_4a9_2206_noserial'
(string)
info.vendor = 'Canon' (string)
usb_device.bus_number = 2 (0x2) (int)
usb_device.can_wake_up = false (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 0 (0x0) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 256 (0x100) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = false (bool)
usb_device.max_power = 500 (0x1f4) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 0 (0x0) (int)
usb_device.port_number = 3 (0x3) (int)
usb_device.product = 'CanoScan' (string)
usb_device.product_id = 8710 (0x2206) (int)
usb_device.speed_bcd = 4608 (0x1200) (int)
usb_device.vendor = 'Canon' (string)
usb_device.vendor_id = 1193 (0x4a9) (int)
usb_device.version_bcd = 256 (0x100) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_4a9_2206_noserial_if0'
info.bus = 'usb' (string)
info.parent =
'/org/freedesktop/Hal/devices/usb_device_4a9_2206_noserial' (string)
info.product = 'USB Vendor Specific Interface' (string)
info.subsystem = 'usb' (string)
info.udi =
'/org/freedesktop/Hal/devices/usb_device_4a9_2206_noserial_if0' (string)
usb.bus_number = 2 (0x2) (int)
usb.can_wake_up = false (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 0 (0x0) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 256 (0x100) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 255 (0xff) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 255 (0xff) (int)
usb.interface.subclass = 0 (0x0) (int)
usb.is_self_powered = false (bool)
usb.max_power = 500 (0x1f4) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 0 (0x0) (int)
usb.port_number = 3 (0x3) (int)
usb.product = 'USB Vendor Specific Interface' (string)
usb.product_id = 8710 (0x2206) (int)
usb.speed_bcd = 4608 (0x1200) (int)
usb.vendor = 'Canon' (string)
usb.vendor_id = 1193 (0x4a9) (int)
usb.version_bcd = 256 (0x100) (int)
I have been able to get usb sticks and removable hard drives working but
the scanner is being proving really difficult so any ideas would be very
much appreciated.
Regards,
_______________________________________________
freebsd...@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
To unsubscribe, send any mail to "freebsd-hacke...@freebsd.org"