Mooltipass MINI holder I built
42 views
Skip to first unread message
shykitten55
Apr 17, 2018, 1:50:44 AM4/17/18
to mooltipass
This is basically a rectangular piece of wood with a 30 degree cut where the Mini fits.
Basically there is a recess carved into the face to hold the Mini and at either side there is a recess for the knob/wheel.
Though I haven't changed the orientation, the Mini can be turned around (180 degrees) but the "Alternate" views are showing how you can turn the piece of wood around to change the angle at which the Mini is held.
I stained the wood to highlight the grain.
Basically there is a recess carved into the face to hold the Mini and at either side there is a recess for the knob/wheel.
Though I haven't changed the orientation, the Mini can be turned around (180 degrees) but the "Alternate" views are showing how you can turn the piece of wood around to change the angle at which the Mini is held.
I stained the wood to highlight the grain.
Reply all
Reply to author
Forward
0 new messages