Table saw push sticks?

[Pete Prodoehl]

Do you buy them, or just make your own?

If you buy, what kind do you like?

If you make your own, what design do you use?



Pete

[Jim Rawson]

I made a few like this http://www.leucht.com/blog/2015/07/woodworking-template-table-saw-push-sticks/

Pete

--

--- You received this message because you are subscribed to the Google Groups "milwaukeemakerspace" group.
To unsubscribe from this group and stop receiving emails from it, send an email to milwaukeemakerspace+unsubscribe...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[Dale Noll]

I make my own out of cutoffs etc.

To unsubscribe from this group and stop receiving emails from it, send an email to milwaukeemakerspace+unsub...@googlegroups.com.

For more options, visit https://groups.google.com/d/optout.

--

Dale Noll

KD9AHE


======================================================
"The truth speaks for itself. I'm just the messenger."
     Lyta Alexander - Babylon 5
======================================================

[Steve Pilon]

Same here, I normally make them by cutting a notch in the end of a stick on the bandsaw, round the corners using the sander and go to town. We do have an array of plastic ones floating around as well. 

[Richard Bowman]

I prefer not using them and getting my fingers right down near the blade. makes me feel alive!!!

[Steve Pilon]

Rick, you could even get a free hat!!!

Thanks for giving me a chuckle today, I needed that :)

[Ronald J.]

There's also a really expensive ride in a super loud but flashy truck if you slip up.

On Oct 12, 2017 11:31 AM, "Steve Pilon" <spi...@gmail.com> wrote:

Rick, you could even get a free hat!!!

Thanks for giving me a chuckle today, I needed that :)

--

[Richard Bowman]

You don't need flashy. A piece of paper towel and a zip tie will get you going.

On Oct 12, 2017 12:10 PM, "Ronald J." <jme...@gmail.com> wrote:

There's also a really expensive ride in a super loud but flashy truck if you slip up.

On Oct 12, 2017 11:31 AM, "Steve Pilon" <spi...@gmail.com> wrote:

Rick, you could even get a free hat!!!

Thanks for giving me a chuckle today, I needed that :)

--

---
You received this message because you are subscribed to the Google Groups "milwaukeemakerspace" group.

To unsubscribe from this group and stop receiving emails from it, send an email to milwaukeemakerspace+unsubscribe...@googlegroups.com.

For more options, visit https://groups.google.com/d/optout.

--

---
You received this message because you are subscribed to a topic in the Google Groups "milwaukeemakerspace" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/milwaukeemakerspace/d8fqCyn99i0/unsubscribe.
To unsubscribe from this group and all its topics, send an email to milwaukeemakerspace+unsub...@googlegroups.com.

[Ronald J.]

Use a brightly colored zip tie and it'll still be flashy!

To unsubscribe from this group and all its topics, send an email to milwaukeemakerspace+unsubscribe...@googlegroups.com.

For more options, visit https://groups.google.com/d/optout.

--

---
You received this message because you are subscribed to the Google Groups "milwaukeemakerspace" group.

To unsubscribe from this group and stop receiving emails from it, send an email to milwaukeemakerspace+unsub...@googlegroups.com.