1.Unable to access configuration for microsoft personal web server
2.saveHive(.DEFAULT)failed
Could anyone tell me the reason for this error?
--
Raj
In case you want to read a little bit more about that issue:
http://groups.google.com/group/microsoft.public.windowsxp.embedded/browse_thread/thread/31f68f2b9038a06f?hl=en
2. Does you media where you deploy the image to have enough free space for the FBA to finish?
Or, related, if you target partition is too small to hold the "during-FBA" or "post-FBA" image.
Also, how does your FBALOG.TXT look like?
--
=========
Regards,
KM
"Raj" <R...@discussions.microsoft.com> wrote in message news:B37CE629-7127-46CF...@microsoft.com...
"KM" wrote:
> Hello KM,
Thank you for your kind information.Actually my image slx
was taken from xpefiles.com in which i downloaded this
xpproemulation_327.zip.And i didn't remove any component from slx ,i just add
my hardware component then i built image and i put it into FBA process.
And i chose default size for FBWF i,e, 64MB and MY DOM
size is 1GB and RAM size is 512 .
In my case FBA process took nearly 57 minutes .I just metion last step of My
FBALOG.TXT look like
11:11:11 - [FBALaunch]
C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\ngen.exe
C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\System.Deployment.dll
(ExitCode: 0x0)
11:11:13 - [FBALaunch]
C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\ngen.exe
C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\dfsvc.exe (ExitCode: 0x0)
11:11:17 - [FBALaunch]
C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\ngen.exe
C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\Microsoft.Build.Engine.dll
(ExitCode: 0xffffffff)
11:11:18 - [FBALaunch]
C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\ngen.exe
C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\Microsoft.Build.Framework.dll
(ExitCode: 0x0)
11:11:25 - [FBALaunch]
C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\ngen.exe
C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\Microsoft.Build.Tasks.dll
(ExitCode: 0xffffffff)
11:11:27 - [FBALaunch]
C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\ngen.exe
C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\Microsoft.Build.Utilities.dll
(ExitCode: 0x0)
11:11:29 - [FBALaunch]
C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\ngen.exe
C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\Accessibility.dll (ExitCode:
0x0)
11:11:33 - [FBALaunch]
C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\ngen.exe
C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\System.EnterpriseServices.dll
(ExitCode: 0xffffffff)
11:11:36 - [FBALaunch]
C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\ngen.exe
C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\System.Security.dll (ExitCode:
0xffffffff)
11:11:38 - [FBALaunch]
C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\ngen.exe
C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\CustomMarshalers.dll (ExitCode:
0xffffffff)
11:11:44 - [FBALaunch]
C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\ngen.exe
C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\System.DirectoryServices.dll
(ExitCode: 0xffffffff)
11:11:46 - [FBALaunch]
C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\ngen.exe
C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\System.DirectoryServices.Protocols.dll (ExitCode: 0xffffffff)
11:12:38 -
11:12:40 -
11:12:48 -
11:12:52 -
11:12:55 -
11:13:05 -
11:13:11 -
11:18:43 - [FBAFlushFilesToDisk] FlushFileBuffers(C:\) succeeded!
11:18:43 - [FBADoProperShutdown] Sleeping...
11:18:53 - [FBADoProperShutdown] Exiting process...
11:19:58 - [RegFilter] Initializing the parameters for the Registry Filter
11:19:58 - [RegFilter] Using file size: 1 MB
11:19:58 - [RegFilter] Using filename RegfData
11:19:58 - [RegFilter] Using file location \??\C:
11:19:58 - [RegFilter] Created target file \??\C:\RegfData
11:19:59 - [RegFilter] RAM disk created
11:19:59 - [RegFilter] Formatting RAM disk...
11:19:59 - [RegFilter] Format: PercentComplete<0>...
11:19:59 - [RegFilter] Format: PercentComplete<20>...
11:20:00 - [RegFilter] Format: PercentComplete<40>...
11:20:00 - [RegFilter] Format: PercentComplete<60>...
11:20:00 - [RegFilter] Format: PercentComplete<80>...
11:20:00 - [RegFilter] Format: Complete.
11:20:00 - [CallEntryPointThread] C:\WINDOWS\system32\regfinit.dll,
InitializeRegistryFilter
11:20:01 - [FBWF] ConfigureFbwf() Start.
11:20:02 - [FBWF] Getting FBWF config parameters from registry.
11:20:02 - [FBWF] EnablePostFBA will be 1.
11:20:02 - [FBWF] Custom threshold 64MB.
11:20:02 - [FBWF] CacheType 1.
11:20:03 - [FBWF] Failed to open FBWF FBA Exclusion key.
11:20:03 - [FBWF] Number Protection Entries 0
11:20:03 - [FBWF] ConfigureFbwf() End, finalStatus = 0x0.
11:20:03 - [CallEntryPointThread] C:\WINDOWS\system32\fbwfdll.dll,
ConfigureFbwf
11:20:04 - [FBASetProgressText] Resetting Setup Flag...
11:23:09 - [FBADoProperShutdown] Sleeping...
11:23:19 - [FBADoProperShutdown] Rebooting system...
Thank you
Regards
Raj
> Thank you for your kind information.Actually my image slx
> was taken from xpefiles.com in which i downloaded this
> xpproemulation_327.zip.And i didn't remove any component from slx ,i just add
> my hardware component then i built image and i put it into FBA process.
That explains the first issue. As I already mentioned, please read through this thread:
http://groups.google.com/group/microsoft.public.windowsxp.embedded/browse_thread/thread/31f68f2b9038a06f?hl=en
Basically I intentiaonally left the "FrontPage Server Extensions" component in the XPProEmulation since the image serves debugging
purposes, not production.
> And i chose default size for FBWF i,e, 64MB and MY DOM
> size is 1GB and RAM size is 512 .
> In my case FBA process took nearly 57 minutes .I just metion last step of My
> FBALOG.TXT look like
You should be actually running the image through FBA on a HDD.
1G may not be enough fit for such huge image like XPProEmulation. Any particular reason you've chosen XPProEmulation? You may want
to remove some heavy components from that image config if you don't need them. For instance, ASP.Net, .Net Framework, etc.
--
=========
Regards,
KM
Thank you
--
Regards
Raj