Error 0xC00D1B70 - Cannot find valid output stream from source

[Sergey]

I'm writing a DirectShow source filter for MPEG-2 TS streaming. Its main
purpose is to retransmit a transport stream from the network to WME9. The
filter works fine in VLC when it is selected as a capture device and
capturing is started. But I have a problem when using the filter as a source
in WME9 - error 0xC00D1B70 "Cannot find valid output stream from source" is
dropped.

The filter class declaration looks like:
class ReceiverFilter :
public CSource,
public ISpecifyPropertyPages,
public IAMFilterMiscFlags,
public IAMStreamConfig

Its only one source pin declaration looks like:
class ReceiverSourceStream :
public CSourceStream,
public IAMPushSource,
public IAMStreamConfig,
public IKsPropertySet

What can be wrong? Maybe I need to implement some other interfaces? Or may
be I need to take special care about the implementation of some methods? Or
do I need to register the filter in some special category? ...?

I can't find any information about what WME9 expects from a DirectShow
filter in order it to be a valid source for MPEG-2 TS streaming. I would
appreciate any help or advise.

[Hot-text]

VLC it running Processes for DirectShow source filter for MPEG-2 at
the sometime as WME9
VLC it running Processes for all Videos, Audios, capture devices, at
the sometime as all Microsoft Player are running

I uninstall VLC its not good for Windows Media Encoder or Windows Move
Maker!
I have TEST VLC with Windows Media Encoder or Windows Move Maker it made
error error error and error !

Now don't get me wrought VLC is good if you do not have or work with or
run Windows Media Encoder or Windows Move Maker!
.VLC is not made for Microsoft Media Center

VLC Believe he is the Media Center and if you have a PC with no Microsoft
Media Center he good to have!

Just Remember VLC it running Processes for Windows Media Encoder or
Windows Move Maker!
do not need VLC it running Processes for it!

Windows Media Encoder or Windows Move Maker do a good job running there
on Processes

I TEST VLC right now you are TESTING VLC

"Sergey" <Ser...@discussions.microsoft.com> wrote in message
news:9E332173-1206-426B...@microsoft.com...

[Sergey]

I still need a help!

[Hot-text]

There no Pug-ins WME to VLC

http://en.wikipedia.org/wiki/VLC_media_player

have you Go to VLC for helpI
But if need help we have to start with VLC

STAST VLC media player
Click on Settings
Click on Preferences

you see
Input /Codecs
Stream output
Advanced

Input /Codecs <<< Muxers <<< MPEG-TS <<< Check Advanced options
( Vlc) This program has performed an illegal operation and will be shut down
It the problem persists, contact the program verdor.

that’s all the help I will give you so Work it out !
MPEG-TS TS muxer (libdvbpsi)
http://lists.mplayerhq.hu/pipermail/ffmpeg-devel/
http://www2.uk.freebsd.org/gfx/show/vlc-0.8.6f-mos-b6-src.readme
http://folk.uio.no/michaeka/tilverden/vlcrc

But you cannot have WME and VLC
some one would have to go. Pack one
it up to you

Microsoft or Linux
http://www.mythdora.com/?q=node/4607

"Sergey" <Ser...@discussions.microsoft.com> wrote in message

news:62E31DEA-C788-4CA2...@microsoft.com...