[PATCH 00/12] General cleanups and MX23EVK support

588 views
Skip to first unread message

Otavio Salvador

unread,
May 19, 2012, 3:44:43 PM5/19/12
to meta-f...@googlegroups.com
The patchset makes some general cleanups in the supporting code and
also adds support to MX23EVK board using imx-bootlets.

I boot tested it and it works fine but it fail to mount rootfs; I am
most probably doing something stupid and preferred to share this
patchset to see if someone can test it and report back to me.

The patches 1 up to 6 are mostly safe and I will push those if nobody
complains until Monday; others we need to figure out what is wrong and
fix, before pushing them.

The following changes since commit 3920d55fcb075b3e5d8f97c9417f55e996eb4fcc:

linux-imx (2.6.35.3): use SoC family for COMPATIBLE_MACHINE matching (2012-05-19 10:57:21 -0300)

are available in the git repository at:
git://github.com/OSSystems/meta-fsl-arm master
https://github.com/OSSystems/meta-fsl-arm/tree/master

Otavio Salvador (12):
imx28evk: remove deprecated XSERVER packages
imx28evk: move generic code to mxs-base.inc
image_types_fsl.bbclass: drop typo in comments generation commands
image_types_fsl.bbclass: remove i.MXS specific code from i.MX
linux-imx (2.6.35.3): use ttyAMA as debug serial
mxs-base.inc: set serial console to ttyAMA
imx-bootlets: add 10.05.02
image_types_fsl.bbclass: add imx-bootlets support for i.MXS
imx28evk: add IMXBOOTLETS_MACHINE setting
linux-imx (2.6.35.3): add imx23evk configuration
imx23evk: add machine definition
image_types_fsl.bbclass: use MiB size to generate i.MX SD cards

classes/image_types_fsl.bbclass | 82 +-
conf/machine/imx23evk.conf | 14 +
conf/machine/imx28evk.conf | 29 +-
conf/machine/include/mxs-base.inc | 28 +
.../imx-bootlets/linux_prebuilt-fix-paths.patch | 26 +
.../imx-bootlets/linux_prep-fix-cmdlines.patch | 30 +
recipes-bsp/imx-bootlets/imx-bootlets_10.05.02.bb | 64 +
.../linux/linux-imx-2.6.35.3/imx23evk/defconfig | 2053 ++++++++++++++++++++
.../mxs-duart-use-ttyAMA-for-device-name.patch | 42 +
recipes-kernel/linux/linux-imx_2.6.35.3.bb | 3 +-
10 files changed, 2314 insertions(+), 57 deletions(-)
create mode 100644 conf/machine/imx23evk.conf
create mode 100644 conf/machine/include/mxs-base.inc
create mode 100644 recipes-bsp/imx-bootlets/imx-bootlets/linux_prebuilt-fix-paths.patch
create mode 100644 recipes-bsp/imx-bootlets/imx-bootlets/linux_prep-fix-cmdlines.patch
create mode 100644 recipes-bsp/imx-bootlets/imx-bootlets_10.05.02.bb
create mode 100644 recipes-kernel/linux/linux-imx-2.6.35.3/imx23evk/defconfig
create mode 100644 recipes-kernel/linux/linux-imx-2.6.35.3/mxs-duart-use-ttyAMA-for-device-name.patch

--
1.7.2.5

Otavio Salvador

unread,
May 19, 2012, 3:44:44 PM5/19/12
to meta-f...@googlegroups.com
Nowadays the evdev driver, from Xorg, can handle keyboard, mice and
touchscreen so we don't need to install the old drivers anymore.

Signed-off-by: Otavio Salvador <ota...@ossystems.com.br>
---
conf/machine/imx28evk.conf | 3 ---
1 files changed, 0 insertions(+), 3 deletions(-)

diff --git a/conf/machine/imx28evk.conf b/conf/machine/imx28evk.conf
index 5a71f0c..17b9fe4 100644
--- a/conf/machine/imx28evk.conf
+++ b/conf/machine/imx28evk.conf
@@ -25,10 +25,7 @@ EXTRA_IMAGEDEPENDS = "u-boot"

XSERVER = "xserver-xorg-lite \
xf86-input-evdev \
- xf86-input-mouse \
- xf86-input-tslib \
xf86-video-fbdev \
- xf86-input-keyboard \
"

SDCARD_ROOTFS ?= "${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ext3"
--
1.7.2.5

Otavio Salvador

unread,
May 19, 2012, 3:44:45 PM5/19/12
to meta-f...@googlegroups.com
To avoid metadata duplication we provide a mxs-base.inc to be used for
every i.MXS based board.

Signed-off-by: Otavio Salvador <ota...@ossystems.com.br>
---
conf/machine/imx28evk.conf | 26 ++------------------------
conf/machine/include/mxs-base.inc | 28 ++++++++++++++++++++++++++++
2 files changed, 30 insertions(+), 24 deletions(-)
create mode 100644 conf/machine/include/mxs-base.inc

diff --git a/conf/machine/imx28evk.conf b/conf/machine/imx28evk.conf
index 17b9fe4..3822977 100644
--- a/conf/machine/imx28evk.conf
+++ b/conf/machine/imx28evk.conf
@@ -2,15 +2,7 @@
#@NAME: imx28 evaluation kit
#@DESCRIPTION: Machine configuration for Freescale imx28 evaluation kit

-include conf/distro/include/fsl-default-settings.inc
-include conf/distro/include/fsl-default-versions.inc
-include conf/distro/include/fsl-default-revisions.inc
-include conf/distro/include/fsl-default-providers.inc
-
-include conf/machine/include/soc-family.inc
-include conf/machine/include/tune-arm926ejs.inc
-
-SOC_FAMILY = "mxs"
+include conf/machine/include/mxs-base.inc

UBOOT_ENTRYPOINT = "0x41008000"
UBOOT_LOADADDRESS = "0x41008000"
@@ -18,21 +10,7 @@ UBOOT_MACHINE = "mx28evk_config"
UBOOT_MAKE_TARGET = "u-boot.sb"
UBOOT_SUFFIX = "sb"

-# Ship kernel modules
-MACHINE_EXTRA_RRECOMMENDS = "kernel-modules"
-
-EXTRA_IMAGEDEPENDS = "u-boot"
-
-XSERVER = "xserver-xorg-lite \
- xf86-input-evdev \
- xf86-video-fbdev \
-"
+KERNEL_IMAGETYPE = "uImage"

SDCARD_ROOTFS ?= "${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ext3"
IMAGE_FSTYPES ?= "tar.bz2 ext3 uboot.mxsboot-sdcard sdcard"
-
-SERIAL_CONSOLE = "115200 ttyAM0"
-
-KERNEL_IMAGETYPE = "uImage"
-
-MACHINE_FEATURES = "apm usbgadget usbhost vfat alsa touchscreen"
diff --git a/conf/machine/include/mxs-base.inc b/conf/machine/include/mxs-base.inc
new file mode 100644
index 0000000..ef8bf7c
--- /dev/null
+++ b/conf/machine/include/mxs-base.inc
@@ -0,0 +1,28 @@
+# Provides the i.MXS common settings
+
+include conf/distro/include/fsl-default-settings.inc
+include conf/distro/include/fsl-default-versions.inc
+include conf/distro/include/fsl-default-revisions.inc
+include conf/distro/include/fsl-default-providers.inc
+
+include conf/machine/include/soc-family.inc
+include conf/machine/include/tune-arm926ejs.inc
+
+SOC_FAMILY = "mxs"
+
+XSERVER = "xserver-xorg-lite \
+ xf86-input-evdev \
+ xf86-video-fbdev"
+
+# Ship kernel modules
+MACHINE_EXTRA_RRECOMMENDS = "kernel-modules"
+
+# Extra audio support
+MACHINE_EXTRA_RRECOMMENDS += "imx-lib imx-audio \
+ pulseaudio \
+ fsl-mm-codeclib \
+ gst-fsl-plugin"
+
+SERIAL_CONSOLE = "115200 ttyAM0"
+
+MACHINE_FEATURES = "apm usbgadget usbhost vfat alsa touchscreen"
--
1.7.2.5

Otavio Salvador

unread,
May 19, 2012, 3:44:46 PM5/19/12
to meta-f...@googlegroups.com
Signed-off-by: Otavio Salvador <ota...@ossystems.com.br>
---
classes/image_types_fsl.bbclass | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/classes/image_types_fsl.bbclass b/classes/image_types_fsl.bbclass
index da44392..0a9e375 100644
--- a/classes/image_types_fsl.bbclass
+++ b/classes/image_types_fsl.bbclass
@@ -40,7 +40,7 @@ SDCARD_GENERATION_COMMAND_mx6 = "generate_imx_sdcard"
#
# External variables needed:
# ${SDCARD_ROOTFS} - the rootfs image to incorporate
-# ${IMAGE_BOOTLOADER} - bootloader to use {u-boot, barebox}x
+# ${IMAGE_BOOTLOADER} - bootloader to use {u-boot, barebox}
#
# The disk layout used is:
#
@@ -91,7 +91,7 @@ generate_imx_sdcard () {
#
# External variables needed:
# ${SDCARD_ROOTFS} - the rootfs image to incorporate
-# ${IMAGE_BOOTLOADER} - bootloader to use {u-boot, barebox}x
+# ${IMAGE_BOOTLOADER} - bootloader to use {u-boot, barebox}
#
# The disk layout used is:
#
--
1.7.2.5

Otavio Salvador

unread,
May 19, 2012, 3:44:47 PM5/19/12
to meta-f...@googlegroups.com
i.MXS generation is now handled completely separated so i.MX doesn't
every gets called for 'mxs' SoC family.

Signed-off-by: Otavio Salvador <ota...@ossystems.com.br>
---
classes/image_types_fsl.bbclass | 6 ------
1 files changed, 0 insertions(+), 6 deletions(-)

diff --git a/classes/image_types_fsl.bbclass b/classes/image_types_fsl.bbclass
index 0a9e375..d039f8e 100644
--- a/classes/image_types_fsl.bbclass
+++ b/classes/image_types_fsl.bbclass
@@ -56,12 +56,6 @@ generate_imx_sdcard () {
parted -s ${SDCARD} mkpart primary ${BOOT_SPACE} 100%
parted ${SDCARD} print

- # Change partition type for mxs processor family
- if [ "${SOC_FAMILY}" = "mxs" ]; then
- bbnote "Setting partition type to 0x53 as required for mxs' SoC family."
- echo -n S | dd of=${SDCARD} bs=1 count=1 seek=450 conv=notrunc
- fi
-
case "${IMAGE_BOOTLOADER}" in
u-boot)
dd if=${DEPLOY_DIR_IMAGE}/u-boot-${MACHINE}.${UBOOT_SUFFIX_SDCARD} of=${SDCARD} conv=notrunc seek=2 skip=${UBOOT_PADDING} bs=512
--
1.7.2.5

Otavio Salvador

unread,
May 19, 2012, 3:44:49 PM5/19/12
to meta-f...@googlegroups.com
Signed-off-by: Otavio Salvador <ota...@ossystems.com.br>
---
conf/machine/include/mxs-base.inc | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/conf/machine/include/mxs-base.inc b/conf/machine/include/mxs-base.inc
index ef8bf7c..5fd270d 100644
--- a/conf/machine/include/mxs-base.inc
+++ b/conf/machine/include/mxs-base.inc
@@ -23,6 +23,6 @@ MACHINE_EXTRA_RRECOMMENDS += "imx-lib imx-audio \
fsl-mm-codeclib \
gst-fsl-plugin"

-SERIAL_CONSOLE = "115200 ttyAM0"
+SERIAL_CONSOLE = "115200 ttyAMA0"

Otavio Salvador

unread,
May 19, 2012, 3:44:48 PM5/19/12
to meta-f...@googlegroups.com
Follow the debug serial device name of i.MX23 and i.MX28 used in
mainline kernel.

Signed-off-by: Otavio Salvador <ota...@ossystems.com.br>
---
.../mxs-duart-use-ttyAMA-for-device-name.patch | 42 ++++++++++++++++++++
recipes-kernel/linux/linux-imx_2.6.35.3.bb | 3 +-
2 files changed, 44 insertions(+), 1 deletions(-)
create mode 100644 recipes-kernel/linux/linux-imx-2.6.35.3/mxs-duart-use-ttyAMA-for-device-name.patch

diff --git a/recipes-kernel/linux/linux-imx-2.6.35.3/mxs-duart-use-ttyAMA-for-device-name.patch b/recipes-kernel/linux/linux-imx-2.6.35.3/mxs-duart-use-ttyAMA-for-device-name.patch
new file mode 100644
index 0000000..6b89bb6
--- /dev/null
+++ b/recipes-kernel/linux/linux-imx-2.6.35.3/mxs-duart-use-ttyAMA-for-device-name.patch
@@ -0,0 +1,42 @@
+From e0b2222000d04b43e7892148dc9892c9375de939 Mon Sep 17 00:00:00 2001
+From: Otavio Salvador <ota...@ossystems.com.br>
+Date: Sat, 5 May 2012 15:04:24 -0300
+Subject: [PATCH] mxs-duart: use ttyAMA for device name
+
+This allow to easy configuration of u-boot avoiding divergences
+between Freescale's and mainline kernels.
+
+Upstream-Status: Inapropriate [configuration]
+
+Signed-off-by: Otavio Salvador <ota...@ossystems.com.br>
+---
+ drivers/serial/mxs-duart.c | 6 +++---
+ 1 file changed, 3 insertions(+), 3 deletions(-)
+
+diff --git a/drivers/serial/mxs-duart.c b/drivers/serial/mxs-duart.c
+index 64e5057..2ba0c33 100644
+--- a/drivers/serial/mxs-duart.c
++++ b/drivers/serial/mxs-duart.c
+@@ -665,7 +665,7 @@ static int __init duart_console_setup(struct console *co, char *options)
+ }
+
+ static struct console duart_console = {
+- .name = "ttyAM",
++ .name = "ttyAMA",
+ .write = duart_console_write,
+ .device = uart_console_device,
+ .setup = duart_console_setup,
+@@ -688,8 +688,8 @@ console_initcall(duart_console_init);
+
+ static struct uart_driver duart_drv = {
+ .owner = THIS_MODULE,
+- .driver_name = "ttyAM",
+- .dev_name = "ttyAM",
++ .driver_name = "ttyAMA",
++ .dev_name = "ttyAMA",
+ .major = SERIAL_DUART_MAJOR,
+ .minor = SERIAL_DUART_MINOR,
+ .nr = 1,
+--
+1.7.10
+
diff --git a/recipes-kernel/linux/linux-imx_2.6.35.3.bb b/recipes-kernel/linux/linux-imx_2.6.35.3.bb
index 83062b9..1f4a453 100644
--- a/recipes-kernel/linux/linux-imx_2.6.35.3.bb
+++ b/recipes-kernel/linux/linux-imx_2.6.35.3.bb
@@ -4,7 +4,7 @@
DESCRIPTION = "Linux kernel for imx platforms"
LICENSE = "GPLv2"
LIC_FILES_CHKSUM = "file://COPYING;md5=d7810fab7487fb0aad327b76f1be7cd7"
-PR = "r16"
+PR = "r17"

inherit kernel
COMPATIBLE_MACHINE = "(mxs|mx5)"
@@ -29,6 +29,7 @@ SRC_URI = "git://git.freescale.com/imx/linux-2.6-imx.git;tag=rel_imx_2.6.35_11.0
file://1147-ENGR00170244-2-ARM-AHCI-Enable-PDDQ-mode-when-no-d.patch \
file://no-unaligned-access.patch \
file://mx28-removecpufreq.patch \
+ file://mxs-duart-use-ttyAMA-for-device-name.patch \
file://0001-mx53_loco-add-USR-led-support.patch \
file://001_Add_accept4_syscall.patch \
file://002_Return_ERESTARTSYS_from_IPU_GET_EVENT.patch \
--
1.7.2.5

Otavio Salvador

unread,
May 19, 2012, 3:44:50 PM5/19/12
to meta-f...@googlegroups.com
Every machine intending to use this, need to set IMXBOOTLETS_MACHINE
variable to allow it to generate proper target code.

Signed-off-by: Otavio Salvador <ota...@ossystems.com.br>
---
.../imx-bootlets/linux_prebuilt-fix-paths.patch | 26 ++++++++
.../imx-bootlets/linux_prep-fix-cmdlines.patch | 30 +++++++++
recipes-bsp/imx-bootlets/imx-bootlets_10.05.02.bb | 64 ++++++++++++++++++++
3 files changed, 120 insertions(+), 0 deletions(-)
create mode 100644 recipes-bsp/imx-bootlets/imx-bootlets/linux_prebuilt-fix-paths.patch
create mode 100644 recipes-bsp/imx-bootlets/imx-bootlets/linux_prep-fix-cmdlines.patch
create mode 100644 recipes-bsp/imx-bootlets/imx-bootlets_10.05.02.bb

diff --git a/recipes-bsp/imx-bootlets/imx-bootlets/linux_prebuilt-fix-paths.patch b/recipes-bsp/imx-bootlets/imx-bootlets/linux_prebuilt-fix-paths.patch
new file mode 100644
index 0000000..513a1fa
--- /dev/null
+++ b/recipes-bsp/imx-bootlets/imx-bootlets/linux_prebuilt-fix-paths.patch
@@ -0,0 +1,26 @@
+imx-bootlets: Fix paths for used during boot stream generation
+
+This will be run during image generation thus this won't use a
+complete path to allow for relocation.
+
+Upstream-Status: Inappropriate [configuration]
+
+Signed-off-by: Otavio Salvador <ota...@ossystems.com.br>
+
+--- a/linux_prebuilt.db 2010-05-14 01:56:28.000000000 -0300
++++ b/linux_prebuilt.db 2012-05-19 10:13:01.941879481 -0300
+@@ -4,10 +4,10 @@
+ flags = 0x01;
+ }
+ sources {
+- power_prep="./power_prep/power_prep";
+- sdram_prep="./boot_prep/boot_prep";
+- linux_prep="./linux_prep/output-target/linux_prep";
+- zImage = "./zImage";
++ power_prep="imx-bootlets-power_prep-@MACHINE@";
++ sdram_prep="imx-bootlets-boot_prep-@MACHINE@";
++ linux_prep="imx-bootlets-linux_prep-@MACHINE@";
++ zImage = "zImage-@MACHINE@.bin";
+ }
+
+ section (0) {
diff --git a/recipes-bsp/imx-bootlets/imx-bootlets/linux_prep-fix-cmdlines.patch b/recipes-bsp/imx-bootlets/imx-bootlets/linux_prep-fix-cmdlines.patch
new file mode 100644
index 0000000..33d710c
--- /dev/null
+++ b/recipes-bsp/imx-bootlets/imx-bootlets/linux_prep-fix-cmdlines.patch
@@ -0,0 +1,30 @@
+imx-bootlets: Fix cmdlines for Linux boot
+
+This adapt the cmdlines for the partitioning layout used on the
+generated SD cards.
+
+Upstream-Status: Inappropriate [configuration]
+
+Signed-off-by: Otavio Salvador <ota...@ossystems.com.br>
+
+diff --git a/linux_prep/cmdlines/iMX28_EVK.txt b/linux_prep/cmdlines/iMX28_EVK.txt
+index 6bc36b9..6cf89a0 100644
+--- a/linux_prep/cmdlines/iMX28_EVK.txt
++++ b/linux_prep/cmdlines/iMX28_EVK.txt
+@@ -1 +1 @@
+-console=ttyAM0,115200 root=/dev/mmcblk0p3 rw rootwait
++console=ttyAMA0,115200 root=/dev/mmcblk0p2 rw rootwait
+diff --git a/linux_prep/cmdlines/stmp378x_dev.txt b/linux_prep/cmdlines/stmp378x_dev.txt
+index 9a717eb..acc076e 100644
+--- a/linux_prep/cmdlines/stmp378x_dev.txt
++++ b/linux_prep/cmdlines/stmp378x_dev.txt
+@@ -1,6 +1,3 @@
+-console=ttyAM0,115200 root=/dev/mmcblk0p3 rw rootwait lcd_panel=lms430 no_console_suspend
+-console=ttyAM0,115200 root=/dev/mmcblk0p3 rw rootwait lcd_panel=lms350
+-console=ttyAM0,115200 ssp1=spi1 ubi.mtd=2 root=ubi0:rootfs0 rootfstype=ubifs lcd_panel=lms430
+-
+-
+-
++console=ttyAMA0,115200 root=/dev/mmcblk0p2 rw rootwait lcd_panel=lms430 no_console_suspend
++console=ttyAMA0,115200 root=/dev/mmcblk0p2 rw rootwait lcd_panel=lms350
++console=ttyAMA0,115200 ssp1=spi1 ubi.mtd=2 root=ubi0:rootfs0 rootfstype=ubifs lcd_panel=lms430
diff --git a/recipes-bsp/imx-bootlets/imx-bootlets_10.05.02.bb b/recipes-bsp/imx-bootlets/imx-bootlets_10.05.02.bb
new file mode 100644
index 0000000..25b0c64
--- /dev/null
+++ b/recipes-bsp/imx-bootlets/imx-bootlets_10.05.02.bb
@@ -0,0 +1,64 @@
+DESCRIPTION = "i.MXS boot streams"
+LICENSE = "GPL-2.0"
+LIC_FILES_CHKSUM = "file://${COREBASE}/meta/files/common-licenses/GPL-2.0;md5=801f80980d171dd6425610833a22dbe6"
+
+SRC_URI = "http://download.ossystems.com.br/bsp/freescale/source/imx-bootlets-src-${PV}.tar.gz \
+ file://linux_prebuilt-fix-paths.patch \
+ file://linux_prep-fix-cmdlines.patch"
+
+SRC_URI[md5sum] = "523a284cd8e6456abe0d3c78cb190aec"
+SRC_URI[sha256sum] = "55cd648e589d33c6aef5986957337a20632321a87304f833d25242447d4bb8a8"
+
+S = "${WORKDIR}/imx-bootlets-src-${PV}"
+
+EXTRA_OEMAKE = "CROSS_COMPILE=${TARGET_PREFIX}"
+
+# Ensure machine defines the IMXBOOTLETS_MACHINE
+python () {
+ if not d.getVar("IMXBOOTLETS_MACHINE", True):
+ PN = d.getVar("PN", True)
+ FILE = os.path.basename(d.getVar("FILE", True))
+ bb.debug(1, "To build %s, see %s for instructions on \
+ setting up your machine config" % (PN, FILE))
+ raise bb.parse.SkipPackage("because IMXBOOTLETS_MACHINE is not set")
+}
+
+do_configure () {
+ # Use machine specific binaries
+ sed -i 's,@MACHINE@,${MACHINE},g' linux_prebuilt.db
+}
+
+do_compile () {
+ oe_runmake BOARD=${IMXBOOTLETS_MACHINE} linux_prep \
+ boot_prep \
+ power_prep
+}
+
+do_install () {
+ install -d ${D}/boot/
+ install -m 644 boot_prep/boot_prep power_prep/power_prep \
+ linux_prep/output-target/linux_prep linux_prebuilt.db \
+ ${D}/boot
+}
+
+FILES_${PN} = "/boot"
+
+do_deploy () {
+ install -d ${DEPLOY_DIR_IMAGE}
+
+ for f in boot_prep/boot_prep \
+ power_prep/power_prep \
+ linux_prep/output-target/linux_prep \
+ linux_prebuilt.db; do
+ full_name="imx-bootlets-`basename $f`-${MACHINE}-${PV}-${PR}"
+ symlink_name="imx-bootlets-`basename $f`-${MACHINE}"
+
+ install -m 644 ${S}/$f ${DEPLOY_DIR_IMAGE}/$full_name
+ (cd ${DEPLOY_DIR_IMAGE} ; rm -f $symlink_nake ; ln -sf $full_name $symlink_name)
+ done
+}
+
+addtask deploy before do_build after do_compile
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+COMPATIBLE_MACHINE = "(mxs)"
--
1.7.2.5

Otavio Salvador

unread,
May 19, 2012, 3:44:51 PM5/19/12
to meta-f...@googlegroups.com
i.MXS SoC family has support to boot with imx-bootlets (the default
when using LTIB) and the only current supported way of booting i.MX23
machines.

The imx-bootlets has some quite specific requirements regaring the
partition layout and includes the kernel binary appended to the boot
stream so we drop the third partition reducing the wasted space of SD
card.

Signed-off-by: Otavio Salvador <ota...@ossystems.com.br>
---
classes/image_types_fsl.bbclass | 68 +++++++++++++++++++++++++++-----------
1 files changed, 48 insertions(+), 20 deletions(-)

diff --git a/classes/image_types_fsl.bbclass b/classes/image_types_fsl.bbclass
index d039f8e..3e01f70 100644
--- a/classes/image_types_fsl.bbclass
+++ b/classes/image_types_fsl.bbclass
@@ -11,6 +11,12 @@ UBOOT_SUFFIX_SDCARD ?= "${UBOOT_SUFFIX}"
# Handles i.MX mxs bootstream generation
#

+# IMX Bootlets Linux bootstream
+IMAGE_DEPENDS_linux.sb = "elftosb-native imx-bootlets virtual/kernel"
+IMAGE_CMD_linux.sb = "(cd ${DEPLOY_DIR_IMAGE} ; elftosb -z -c imx-bootlets-linux_prebuilt.db-${MACHINE} \
+ -o linux.sb-${MACHINE})"
+
+# U-Boot mxsboot generation to SD-Card
UBOOT_SUFFIX_SDCARD_mxs ?= "mxsboot-sdcard"
IMAGE_DEPENDS_uboot.mxsboot-sdcard = "u-boot-mxsboot-native u-boot"
IMAGE_CMD_uboot.mxsboot-sdcard = "mxsboot sd ${DEPLOY_DIR_IMAGE}/u-boot-${MACHINE}.${UBOOT_SUFFIX} \
@@ -57,6 +63,10 @@ generate_imx_sdcard () {
parted ${SDCARD} print

case "${IMAGE_BOOTLOADER}" in
+ imx-bootlets)
+ bberror "The imx-bootlets is not supported for i.MX based machines"
+ exit 1
+ ;;
u-boot)
dd if=${DEPLOY_DIR_IMAGE}/u-boot-${MACHINE}.${UBOOT_SUFFIX_SDCARD} of=${SDCARD} conv=notrunc seek=2 skip=${UBOOT_PADDING} bs=512
;;
@@ -85,29 +95,47 @@ generate_imx_sdcard () {
#
# External variables needed:
# ${SDCARD_ROOTFS} - the rootfs image to incorporate
-# ${IMAGE_BOOTLOADER} - bootloader to use {u-boot, barebox}
-#
-# The disk layout used is:
-#
-# 1M - 2M - reserved to bootloader and other data
-# 2M - BOOT_SPACE - kernel
-# BOOT_SPACE - SDCARD_SIZE - rootfs
+# ${IMAGE_BOOTLOADER} - bootloader to use {imx-bootlets, u-boot}
#
generate_mxs_sdcard () {
# Create partition table
parted -s ${SDCARD} mklabel msdos
- parted -s ${SDCARD} mkpart primary 1MiB 2MiB
- parted -s ${SDCARD} mkpart primary 2MiB ${BOOT_SPACE}
- parted -s ${SDCARD} mkpart primary ${BOOT_SPACE} 100%
- parted ${SDCARD} print
-
- # Change partition type for mxs processor family
- bbnote "Setting partition type to 0x53 as required for mxs' SoC family."
- echo -n S | dd of=${SDCARD} bs=1 count=1 seek=450 conv=notrunc

case "${IMAGE_BOOTLOADER}" in
+ imx-bootlets)
+ # The disk layout used is:
+ #
+ # 1M - BOOT_SPACE - kernel
+ # BOOT_SPACE - SDCARD_SIZE - rootfs
+ #
+ parted -s ${SDCARD} mkpart primary 1MiB ${BOOT_SPACE}
+ parted -s ${SDCARD} mkpart primary ${BOOT_SPACE} 100%
+
+ # Empty 4 bytes from boot partition
+ dd if=/dev/zero of=${SDCARD} conv=notrunc seek=2048 count=4
+
+ # Write the bootstream in (2048 + 4) bytes
+ dd if=${DEPLOY_DIR_IMAGE}/linux.sb-${MACHINE} of=${SDCARD} conv=notrunc seek=1 seek=2052
+ ;;
u-boot)
+ # The disk layout used is:
+ #
+ # 1M - 2M - reserved to bootloader and other data
+ # 2M - BOOT_SPACE - kernel
+ # BOOT_SPACE - SDCARD_SIZE - rootfs
+ #
+ parted -s ${SDCARD} mkpart primary 1MiB 2MiB
+ parted -s ${SDCARD} mkpart primary 2MiB ${BOOT_SPACE}
+ parted -s ${SDCARD} mkpart primary ${BOOT_SPACE} 100%
+
dd if=${DEPLOY_DIR_IMAGE}/u-boot-${MACHINE}.${UBOOT_SUFFIX_SDCARD} of=${SDCARD} conv=notrunc seek=1 skip=${UBOOT_PADDING} bs=1MiB
+ BOOT_BLOCKS=$(LC_ALL=C parted -s ${SDCARD} unit b print \
+ | awk '/ 2 / { print substr($4, 1, length($4 -1)) / 1024 }')
+
+ mkfs.vfat -n "${BOOTDD_VOLUME_ID}" -S 512 -C ${WORKDIR}/boot.img $BOOT_BLOCKS
+ mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/uImage-${MACHINE}.bin ::/uImage
+
+ dd if=${WORKDIR}/boot.img of=${SDCARD} conv=notrunc seek=2 bs=1MiB
;;
*)
bberror "Unkown IMAGE_BOOTLOADER value"
@@ -115,12 +143,12 @@ generate_mxs_sdcard () {
;;
esac

- BOOT_BLOCKS=$(LC_ALL=C parted -s ${SDCARD} unit b print \
- | awk '/ 2 / { print substr($4, 1, length($4 -1)) / 1024 }')
- mkfs.vfat -n "${BOOTDD_VOLUME_ID}" -S 512 -C ${WORKDIR}/boot.img $BOOT_BLOCKS
- mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/uImage-${MACHINE}.bin ::/uImage
+ # Change partition type for mxs processor family
+ bbnote "Setting partition type to 0x53 as required for mxs' SoC family."
+ echo -n S | dd of=${SDCARD} bs=1 count=1 seek=450 conv=notrunc
+
+ parted ${SDCARD} print

- dd if=${WORKDIR}/boot.img of=${SDCARD} conv=notrunc seek=2 bs=1MiB
dd if=${SDCARD_ROOTFS} of=${SDCARD} conv=notrunc seek=1 bs=${BOOT_SPACE}
}

--
1.7.2.5

Otavio Salvador

unread,
May 19, 2012, 3:44:52 PM5/19/12
to meta-f...@googlegroups.com
Add support to generate imx-bootlets code for i.MX28 target.

Signed-off-by: Otavio Salvador <ota...@ossystems.com.br>
---
conf/machine/imx28evk.conf | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)

diff --git a/conf/machine/imx28evk.conf b/conf/machine/imx28evk.conf
index 3822977..bbd8cd5 100644
--- a/conf/machine/imx28evk.conf
+++ b/conf/machine/imx28evk.conf
@@ -4,6 +4,8 @@

include conf/machine/include/mxs-base.inc

+IMXBOOTLETS_MACHINE = "iMX28_EVK"
+
UBOOT_ENTRYPOINT = "0x41008000"
UBOOT_LOADADDRESS = "0x41008000"
UBOOT_MACHINE = "mx28evk_config"
--
1.7.2.5

Otavio Salvador

unread,
May 19, 2012, 3:44:53 PM5/19/12
to meta-f...@googlegroups.com
The kernel configuration has been imported from Freescale's official
GIT repository, for 2.6.35.3 recipe, but with CONFIG_ROOT_NFS disabled
as we use the NFS server in user-mode.

Signed-off-by: Otavio Salvador <ota...@ossystems.com.br>
---
.../linux/linux-imx-2.6.35.3/imx23evk/defconfig | 2053 ++++++++++++++++++++
1 files changed, 2053 insertions(+), 0 deletions(-)
create mode 100644 recipes-kernel/linux/linux-imx-2.6.35.3/imx23evk/defconfig

diff --git a/recipes-kernel/linux/linux-imx-2.6.35.3/imx23evk/defconfig b/recipes-kernel/linux/linux-imx-2.6.35.3/imx23evk/defconfig
new file mode 100644
index 0000000..545696f
--- /dev/null
+++ b/recipes-kernel/linux/linux-imx-2.6.35.3/imx23evk/defconfig
@@ -0,0 +1,2053 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.35.3
+# Fri Nov 5 09:51:09 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_FIQ=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+# CONFIG_RD_LZO is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_VEXPRESS is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CNS3XXX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+CONFIG_ARCH_MXS=y
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_NUC93X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_SHMOBILE is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P6440 is not set
+# CONFIG_ARCH_S5P6442 is not set
+# CONFIG_ARCH_S5PC100 is not set
+# CONFIG_ARCH_S5PV210 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_PLAT_SPEAR is not set
+CONFIG_IRAM_ALLOC=y
+CONFIG_DMA_ZONE_SIZE=12
+
+#
+# Freescale i.MXS implementations
+#
+# CONFIG_ARCH_MX28 is not set
+CONFIG_ARCH_MX23=y
+CONFIG_VECTORS_PHY_ADDR=0
+CONFIG_MACH_MX23EVK=y
+CONFIG_MXS_UNIQUE_ID=y
+CONFIG_MXS_UNIQUE_ID_OTP=y
+CONFIG_MXS_ICOLL=y
+CONFIG_MXS_EARLY_CONSOLE=y
+CONFIG_MXS_DMA_ENGINE=y
+CONFIG_MXS_LRADC=y
+CONFIG_MXS_PWM_CHANNELS=8
+
+#
+# Freescale Application UART:
+#
+CONFIG_MXS_AUART_DMA_SUPPORT=y
+CONFIG_MXS_AUART_PORTS=5
+# CONFIG_MXS_AUART0_DEVICE_ENABLE is not set
+# CONFIG_MXS_AUART0_DMA_ENABLE is not set
+CONFIG_MXS_AUART1_DEVICE_ENABLE=y
+# CONFIG_MXS_AUART1_DMA_ENABLE is not set
+# CONFIG_MXS_AUART2_DEVICE_ENABLE is not set
+# CONFIG_MXS_AUART2_DMA_ENABLE is not set
+# CONFIG_MXS_AUART3_DEVICE_ENABLE is not set
+# CONFIG_MXS_AUART3_DMA_ENABLE is not set
+# CONFIG_MXS_AUART4_DEVICE_ENABLE is not set
+# CONFIG_MXS_AUART4_DMA_ENABLE is not set
+CONFIG_MXS_RAM_FREQ_SCALING=y
+# CONFIG_MXS_RAM_MDDR is not set
+CONFIG_MXS_RAM_DDR=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=999999
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyAM0,115200 root=/dev/mmcblk0p2 rootwait lcd_panel=lms350"
+# CONFIG_CMDLINE_FORCE is not set
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_NVS=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
+CONFIG_PM_OPS=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+CONFIG_ARPD=y
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+CONFIG_INET6_XFRM_MODE_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_BEET=y
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=y
+# CONFIG_IPV6_SIT_6RD is not set
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_XTABLES is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_NF_DEFRAG_IPV4 is not set
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# IPv6: Netfilter Configuration
+#
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_L2TP is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+
+#
+# Some wireless drivers require a rate control algorithm
+#
+# CONFIG_WIMAX is not set
+CONFIG_RFKILL=y
+CONFIG_RFKILL_INPUT=y
+# CONFIG_NET_9P is not set
+# CONFIG_CAIF is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_SM_FTL is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_MXC_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND_ECC=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_SM_COMMON is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+CONFIG_MTD_NAND_GPMI_NFC=y
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+CONFIG_MTD_UBI_BLOCK=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
+CONFIG_MXS_PERSISTENT=y
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_IWMC3200TOP is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+CONFIG_ENC28J60=y
+# CONFIG_ENC28J60_WRITEVERIFY is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+CONFIG_WLAN=y
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_ATH6K_LEGACY is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_HSO is not set
+# CONFIG_USB_IPHETH is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_POLLDEV=y
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_TCA6416 is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_KEYBOARD_MXS=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+CONFIG_TOUCHSCREEN_MXS=y
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_TOUCHSCREEN_TPS6507X is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_AD714X is not set
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+# CONFIG_INPUT_UINPUT is not set
+# CONFIG_INPUT_PCF8574 is not set
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_N_GSM is not set
+CONFIG_MXS_VIIM=y
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_MXS_DUART=y
+CONFIG_SERIAL_MXS_AUART=y
+# CONFIG_SERIAL_MXS_AUART_CONSOLE is not set
+CONFIG_SERIAL_MXS_DUART_CONSOLE=y
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_FSL_OTP is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_RAMOOPS is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_MXS=y
+CONFIG_I2C_MXS_SELECT0=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+# CONFIG_SPI_XILINX is not set
+CONFIG_SPI_MXS=y
+# CONFIG_SPI_DESIGNWARE is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_IT8761E is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX7300 is not set
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
+
+#
+# MODULbus GPIO expanders:
+#
+# CONFIG_W1 is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_TEST_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_DS2782 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_MAX17040 is not set
+CONFIG_BATTERY_MXS=y
+# CONFIG_MXS_VBUS_CURRENT_DRAW is not set
+# CONFIG_BATTERY_DS2438 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM73 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX17135 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_EMC1403 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_ADS7871 is not set
+# CONFIG_SENSORS_AMC6821 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP102 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
+CONFIG_MXC_MMA7450=m
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_MXS_WATCHDOG=y
+# CONFIG_MAX63XX_WATCHDOG is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+CONFIG_MFD_SUPPORT=y
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TPS6507X is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TC35892 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
+# CONFIG_MFD_LTC3589_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_ABX500_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_AB8500_CORE is not set
+# CONFIG_MFD_MAX17135 is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_DUMMY is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_MAX8649 is not set
+# CONFIG_REGULATOR_MAX8660 is not set
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+CONFIG_REGULATOR_MXS=y
+CONFIG_MEDIA_SUPPORT=y
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=y
+
+#
+# Multimedia drivers
+#
+CONFIG_IR_CORE=y
+CONFIG_VIDEO_IR=y
+CONFIG_RC_MAP=y
+CONFIG_IR_NEC_DECODER=y
+CONFIG_IR_RC5_DECODER=y
+CONFIG_IR_RC6_DECODER=y
+CONFIG_IR_JVC_DECODER=y
+CONFIG_IR_SONY_DECODER=y
+# CONFIG_IR_IMON is not set
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=y
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=y
+CONFIG_MEDIA_TUNER_TDA8290=y
+CONFIG_MEDIA_TUNER_TDA9887=y
+CONFIG_MEDIA_TUNER_TEA5761=y
+CONFIG_MEDIA_TUNER_TEA5767=y
+CONFIG_MEDIA_TUNER_MT20XX=y
+CONFIG_MEDIA_TUNER_XC2028=y
+CONFIG_MEDIA_TUNER_XC5000=y
+CONFIG_MEDIA_TUNER_MC44S803=y
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEOBUF_GEN=y
+CONFIG_VIDEOBUF_DMA_CONTIG=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+CONFIG_VIDEO_IR_I2C=y
+CONFIG_VIDEO_MXS_PXP=y
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_SOC_CAMERA is not set
+CONFIG_V4L_USB_DRIVERS=y
+# CONFIG_USB_VIDEO_CLASS is not set
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
+# CONFIG_USB_M5602 is not set
+# CONFIG_USB_STV06XX is not set
+# CONFIG_USB_GL860 is not set
+# CONFIG_USB_GSPCA_BENQ is not set
+# CONFIG_USB_GSPCA_CONEX is not set
+# CONFIG_USB_GSPCA_CPIA1 is not set
+# CONFIG_USB_GSPCA_ETOMS is not set
+# CONFIG_USB_GSPCA_FINEPIX is not set
+# CONFIG_USB_GSPCA_JEILINJ is not set
+# CONFIG_USB_GSPCA_MARS is not set
+# CONFIG_USB_GSPCA_MR97310A is not set
+# CONFIG_USB_GSPCA_OV519 is not set
+# CONFIG_USB_GSPCA_OV534 is not set
+# CONFIG_USB_GSPCA_OV534_9 is not set
+# CONFIG_USB_GSPCA_PAC207 is not set
+# CONFIG_USB_GSPCA_PAC7302 is not set
+# CONFIG_USB_GSPCA_PAC7311 is not set
+# CONFIG_USB_GSPCA_SN9C2028 is not set
+# CONFIG_USB_GSPCA_SN9C20X is not set
+# CONFIG_USB_GSPCA_SONIXB is not set
+# CONFIG_USB_GSPCA_SONIXJ is not set
+# CONFIG_USB_GSPCA_SPCA500 is not set
+# CONFIG_USB_GSPCA_SPCA501 is not set
+# CONFIG_USB_GSPCA_SPCA505 is not set
+# CONFIG_USB_GSPCA_SPCA506 is not set
+# CONFIG_USB_GSPCA_SPCA508 is not set
+# CONFIG_USB_GSPCA_SPCA561 is not set
+# CONFIG_USB_GSPCA_SQ905 is not set
+# CONFIG_USB_GSPCA_SQ905C is not set
+# CONFIG_USB_GSPCA_STK014 is not set
+# CONFIG_USB_GSPCA_STV0680 is not set
+# CONFIG_USB_GSPCA_SUNPLUS is not set
+# CONFIG_USB_GSPCA_T613 is not set
+# CONFIG_USB_GSPCA_TV8532 is not set
+# CONFIG_USB_GSPCA_VC032X is not set
+# CONFIG_USB_GSPCA_ZC3XX is not set
+# CONFIG_VIDEO_PVRUSB2 is not set
+# CONFIG_VIDEO_HDPVR is not set
+# CONFIG_VIDEO_EM28XX is not set
+# CONFIG_VIDEO_CX231XX is not set
+# CONFIG_VIDEO_USBVISION is not set
+# CONFIG_USB_VICAM is not set
+# CONFIG_USB_IBMCAM is not set
+# CONFIG_USB_KONICAWC is not set
+# CONFIG_USB_QUICKCAM_MESSENGER is not set
+# CONFIG_USB_ET61X251 is not set
+# CONFIG_VIDEO_OVCAMCHIP is not set
+# CONFIG_USB_OV511 is not set
+# CONFIG_USB_SE401 is not set
+# CONFIG_USB_SN9C102 is not set
+# CONFIG_USB_STV680 is not set
+# CONFIG_USB_ZC0301 is not set
+# CONFIG_USB_PWC is not set
+# CONFIG_USB_ZR364XX is not set
+# CONFIG_USB_STKWEBCAM is not set
+# CONFIG_USB_S2255 is not set
+# CONFIG_V4L_MEM2MEM_DRIVERS is not set
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_I2C_SI4713 is not set
+# CONFIG_RADIO_SI4713 is not set
+# CONFIG_USB_DSBR is not set
+# CONFIG_RADIO_SI470X is not set
+# CONFIG_USB_MR800 is not set
+# CONFIG_RADIO_TEA5764 is not set
+# CONFIG_RADIO_SAA7706H is not set
+# CONFIG_RADIO_TEF6862 is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_MXS=y
+# CONFIG_FB_MXS_LCD_43WVF1G is not set
+CONFIG_FB_MXS_LCD_LMS430=y
+# CONFIG_FB_MXS_TVENC is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+# CONFIG_BACKLIGHT_ADP8860 is not set
+CONFIG_BACKLIGHT_MXS=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=y
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_JACK=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+CONFIG_SND_SPI=y
+# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_MXS_SOC=y
+CONFIG_SND_MXS_SOC_EVK_ADC=y
+CONFIG_SND_MXS_SOC_ADC=y
+# CONFIG_SND_MXS_SOC_EVK_DEVB_SPDIF is not set
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_MXS_ADC_CODEC=y
+# CONFIG_SOUND_PRIME is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ARC=y
+CONFIG_USB_EHCI_ARC_OTG=y
+# CONFIG_USB_STATIC_IRAM is not set
+# CONFIG_USB_EHCI_FSL_MC13783 is not set
+# CONFIG_USB_EHCI_FSL_1301 is not set
+# CONFIG_USB_EHCI_FSL_1504 is not set
+CONFIG_USB_EHCI_FSL_UTMI=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+CONFIG_USB_GADGET_ARC=y
+CONFIG_USB_ARC=y
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_ETH_EEM is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FUNCTIONFS is not set
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_FSL_UTP is not set
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+# CONFIG_USB_MASS_STORAGE is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+CONFIG_USB_CDC_COMPOSITE=m
+# CONFIG_USB_G_NOKIA is not set
+# CONFIG_USB_G_MULTI is not set
+# CONFIG_USB_G_HID is not set
+# CONFIG_USB_G_WEBCAM is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_USB_ULPI is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_MXC_OTG is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_UNSAFE_RESUME=y
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MMC_IMX_ESDHCI_PIO_MODE is not set
+CONFIG_MMC_MXS=y
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_MXS=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_UBIFS_FS=y
+# CONFIG_UBIFS_FS_XATTR is not set
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
+# CONFIG_LOGFS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_ROOT_NFS is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_EARLY_PRINTK is not set
+# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_OC_ETM is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_SECURITY=y
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_NETWORK is not set
+# CONFIG_SECURITY_PATH is not set
+# CONFIG_SECURITY_TOMOYO is not set
+# CONFIG_IMA is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_MANAGER_TESTS=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_CRYPTODEV=y
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_DEV_DCP=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
--
1.7.2.5

Otavio Salvador

unread,
May 19, 2012, 3:44:54 PM5/19/12
to meta-f...@googlegroups.com
Signed-off-by: Otavio Salvador <ota...@ossystems.com.br>
---
conf/machine/imx23evk.conf | 14 ++++++++++++++
1 files changed, 14 insertions(+), 0 deletions(-)
create mode 100644 conf/machine/imx23evk.conf

diff --git a/conf/machine/imx23evk.conf b/conf/machine/imx23evk.conf
new file mode 100644
index 0000000..dea88cb
--- /dev/null
+++ b/conf/machine/imx23evk.conf
@@ -0,0 +1,14 @@
+#@TYPE: Machine
+#@NAME: i.MX233 evaluation kit
+#@DESCRIPTION: Machine configuration for Freescale i.MX23 Evaluation Kit
+
+include conf/machine/include/mxs-base.inc
+
+IMXBOOTLETS_MACHINE = "stmp378x_dev"
+
+KERNEL_IMAGETYPE = "zImage"
+
+IMAGE_BOOTLOADER = "imx-bootlets"
+
+SDCARD_ROOTFS ?= "${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ext3"
+IMAGE_FSTYPES ?= "tar.bz2 ext3 linux.sb sdcard"
--
1.7.2.5

Otavio Salvador

unread,
May 19, 2012, 3:44:55 PM5/19/12
to meta-f...@googlegroups.com
Signed-off-by: Otavio Salvador <ota...@ossystems.com.br>
---
classes/image_types_fsl.bbclass | 6 +++---
1 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/classes/image_types_fsl.bbclass b/classes/image_types_fsl.bbclass
index 3e01f70..f79d656 100644
--- a/classes/image_types_fsl.bbclass
+++ b/classes/image_types_fsl.bbclass
@@ -29,7 +29,7 @@ SDCARD_SIZE ?= "3400"
BOOTDD_VOLUME_ID ?= "Boot ${MACHINE}"

# Addional space for boot partition
-BOOT_SPACE ?= "5M"
+BOOT_SPACE ?= "5MiB"

IMAGE_DEPENDS_sdcard = "parted-native dosfstools-native mtools-native \
virtual/kernel ${IMAGE_BOOTLOADER}"
@@ -57,8 +57,8 @@ SDCARD_GENERATION_COMMAND_mx6 = "generate_imx_sdcard"
generate_imx_sdcard () {
# Create partition table
parted -s ${SDCARD} mklabel msdos
- parted -s ${SDCARD} mkpart primary 0 1M
- parted -s ${SDCARD} mkpart primary 1M ${BOOT_SPACE}
+ parted -s ${SDCARD} mkpart primary 0 1MiB
+ parted -s ${SDCARD} mkpart primary 1MiB ${BOOT_SPACE}
parted -s ${SDCARD} mkpart primary ${BOOT_SPACE} 100%
parted ${SDCARD} print

--
1.7.2.5

Fabio Estevam

unread,
May 19, 2012, 4:40:40 PM5/19/12
to meta-f...@googlegroups.com
On Sat, May 19, 2012 at 4:44 PM, Otavio Salvador
<ota...@ossystems.com.br> wrote:
> The patchset makes some general cleanups in the supporting code and
> also adds support to MX23EVK board using imx-bootlets.

Good stuff, thanks

> I boot tested it and it works fine but it fail to mount rootfs; I am
> most probably doing something stupid and preferred to share this
> patchset to see if someone can test it and report back to me.

You are probably missing 'ssp1=mmc' in your kernel command line.

Take a look at:
http://api.ning.com/files/2acgRCwqJMVtVHJmlXztcdyITrrLSGZdF7aM9WfyN6SkXx7YYYLHgP8qMFtrW141o892TtkcVShn7zuaki66hnpoocp2*W6c/SD_Card_Operations.pdf

Fabio Estevam

unread,
May 19, 2012, 4:41:58 PM5/19/12
to meta-f...@googlegroups.com
On Sat, May 19, 2012 at 4:44 PM, Otavio Salvador
<ota...@ossystems.com.br> wrote:
> The patchset makes some general cleanups in the supporting code and
> also adds support to MX23EVK board using imx-bootlets.
>
> I boot tested it and it works fine but it fail to mount rootfs; I am
> most probably doing something stupid and preferred to share this
> patchset to see if someone can test it and report back to me.

Also, please post your boot log here so that we can try to understand
this mount issue.

Otavio Salvador

unread,
May 19, 2012, 5:37:45 PM5/19/12
to meta-f...@googlegroups.com
You were right ... this fixed the rootfs mounting problem; now I got
stuck further ... it seems something didn't set the console right.

Boot log attached.

--
Otavio Salvador                             O.S. Systems
E-mail: ota...@ossystems.com.br  http://www.ossystems.com.br
Mobile: +55 53 9981-7854              http://projetos.ossystems.com.br
bootlog.txt

Otavio Salvador

unread,
May 19, 2012, 5:56:39 PM5/19/12
to meta-f...@googlegroups.com
On Sat, May 19, 2012 at 6:37 PM, Otavio Salvador
<ota...@ossystems.com.br> wrote:
> On Sat, May 19, 2012 at 5:41 PM, Fabio Estevam <fest...@gmail.com> wrote:
>> On Sat, May 19, 2012 at 4:44 PM, Otavio Salvador
>> <ota...@ossystems.com.br> wrote:
>>> The patchset makes some general cleanups in the supporting code and
>>> also adds support to MX23EVK board using imx-bootlets.
>>>
>>> I boot tested it and it works fine but it fail to mount rootfs; I am
>>> most probably doing something stupid and preferred to share this
>>> patchset to see if someone can test it and report back to me.
>>
>> Also, please post your boot log here so that we can try to understand
>> this mount issue.
>
> You were right ... this fixed the rootfs mounting problem; now I got
> stuck further ... it seems something didn't set the console right.
>
> Boot log attached.

No; it seems it now keeps waiting for the root device. Now I have:

<bootlog.txt...>
mxs-rtc mxs-rtc.0: setting system clock to 1970-01-01 03:21:14 UTC (12074)
Waiting for root device /dev/mmcblk0p2...

Otavio Salvador

unread,
May 19, 2012, 6:00:17 PM5/19/12
to meta-f...@googlegroups.com
On Sat, May 19, 2012 at 6:56 PM, Otavio Salvador
<ota...@ossystems.com.br> wrote:
> No; it seems it now keeps waiting for the root device. Now I have:
>
> <bootlog.txt...>
> mxs-rtc mxs-rtc.0: setting system clock to 1970-01-01 03:21:14 UTC (12074)
> Waiting for root device /dev/mmcblk0p2...

I passed the wrong ssp1 param; fixed and trying now. :-)

Otavio Salvador

unread,
May 19, 2012, 6:06:46 PM5/19/12
to meta-f...@googlegroups.com
On Sat, May 19, 2012 at 7:00 PM, Otavio Salvador
<ota...@ossystems.com.br> wrote:
> On Sat, May 19, 2012 at 6:56 PM, Otavio Salvador
> <ota...@ossystems.com.br> wrote:
>> No; it seems it now keeps waiting for the root device. Now I have:
>>
>> <bootlog.txt...>
>> mxs-rtc mxs-rtc.0: setting system clock to 1970-01-01 03:21:14 UTC (12074)
>> Waiting for root device /dev/mmcblk0p2...
>
> I passed the wrong ssp1 param; fixed and trying now. :-)

mxs-rtc mxs-rtc.0: setting system clock to 1970-01-01 03:35:51 UTC (12951)
Waiting for root device /dev/mmcblk0p2...
mmc0: new high speed SDHC card at address e624
mmcblk0: mmc0:e624 SU04G 3.69 GiB (ro)
mmcblk0: p1 p2
VFS: Cannot open root device "mmcblk0p2" or unknown-block(179,2)
Please append a correct "root=" boot option; here are the available partitions:
1f00 40960 mtdblock0 (driver?)
1f01 4153344 mtdblock1 (driver?)
1f02 2097152 mtdblock2 (driver?)
1f03 2056192 mtdblock3 (driver?)
b300 3872256 mmcblk0 driver: mmcblk
b301 4096 mmcblk0p1
b302 57344 mmcblk0p2
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(179,2)

In fact passing the bootparam as:

Kernel command line: console=ttyAMA0,115200 ssp1=mmc
root=/dev/mmcblk0p2 rw rootwait lcd_panel=lms430 no_console_suspend

and seems to know help; passing the ssp1 or not didn't change it.

Fabio Estevam

unread,
May 19, 2012, 6:25:23 PM5/19/12
to meta-f...@googlegroups.com
On Sat, May 19, 2012 at 7:06 PM, Otavio Salvador
<ota...@ossystems.com.br> wrote:

> mxs-rtc mxs-rtc.0: setting system clock to 1970-01-01 03:35:51 UTC (12951)
> Waiting for root device /dev/mmcblk0p2...
> mmc0: new high speed SDHC card at address e624
> mmcblk0: mmc0:e624 SU04G 3.69 GiB (ro)
>  mmcblk0: p1 p2
> VFS: Cannot open root device "mmcblk0p2" or unknown-block(179,2)
> Please append a correct "root=" boot option; here are the available partitions:
> 1f00           40960 mtdblock0 (driver?)
> 1f01         4153344 mtdblock1 (driver?)
> 1f02         2097152 mtdblock2 (driver?)
> 1f03         2056192 mtdblock3 (driver?)
> b300         3872256 mmcblk0 driver: mmcblk
>  b301            4096 mmcblk0p1
>  b302           57344 mmcblk0p2
> Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(179,2)

What is the format of the rootfs in the SD card (ext3, ext4)? Make
sure the kernel config has support for the selected type.

You can try to pass rootfstype=ext3 for example.

Otavio Salvador

unread,
May 20, 2012, 2:49:38 PM5/20/12
to meta-f...@googlegroups.com
ext3

> You can try to pass rootfstype=ext3 for example.

Did not help; still looking why ...

Otavio Salvador

unread,
May 21, 2012, 9:31:57 AM5/21/12
to meta-f...@googlegroups.com
On Sun, May 20, 2012 at 3:49 PM, Otavio Salvador
<ota...@ossystems.com.br> wrote:
>> You can try to pass rootfstype=ext3 for example.
>
> Did not help; still looking why ...

Ok; the problem was a incompatibility with the sdcard I were using. I
merged the patches on master and denzil branches. :-D
Reply all
Reply to author
Forward
0 new messages