V. B.--
To post to this group, send email to material...@googlegroups.com
To unsubscribe from this group, send email to materials-weld...@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
Mr.Bhaskar,
This is fastener standard for bolts
Grade 8.8 means , Approx. 800 MPa TS and 640 MPa yield strength( you will arrive at the YS by multiplying the both the numbers times 10. That is 8x8x10=640)
Similarly , 10.9 means approx.1000 MPa TS and 900 MPa yield strength. I have given below the exact details.
Property Class | Tensile strength,Mpa | Hardness | Material | heat treatment | tempering |
4.6 | 400 | B67-B87 | low or medium carbon steel witth max limits for C 0.55, P0.048, S0.058 | no |
|
4.8 | 420 | B71-B87 | |||
5.8 | 520 | B82-B95 | |||
8.8 | 830 | C23-C34 | medium carbon steel with max limits for C0.28- 0.55, P0.048, S0.058 | oil quenched | min 425 deg C |
9.8 | 900 | C27-C36 | min 410 deg C | ||
10.9 | 1040 | C33-C39 | min425 deg C | ||
12.9 | 1220 | C38-C44 | medium carbon steel with max limits for C0.31- 0.65, P 0.045 MAX, S 0.045MAX | oil quenched | min 380deg C |
I hope this will clarify your point. If any questions please don’t hesitate to write.
Regards,
S C Balawat.
--
In 4.6 ,4 means 40kg/mm2 tensile & 6 means 0.6 of 40 I.e.24 kg/mm2 yield.similar for other classes.
--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To post to this group, send email to material...@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/37f21378-624e-4b12-93b6-2cbb7da3049f%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
I am disappointed that my mildly worded expression of concern has not been released by you. The original author appears to have little understanding of the subject of high tensile bolts and this merits comment, when lives may be at risk from the product manufactured by that correspondent.
Alan
Alan Denney
AKD Materials Consulting Ltd
From: Alan Denney [mailto:al...@denney1.freeserve.co.uk]
Sent: 19 July 2016 19:45
To: 'material...@googlegroups.com' <material...@googlegroups.com>
Subject: RE: 25120] Re: 16160] Difference between IS 1367 Gr. 4.6, 8.8 & 10.9
I am surprised. You appear to be about to make high tensile bolts, but do not understand the grade designation and are asking others to do your material selection for you, and without mentioning the diameter of the bolt which is a critical factor in getting the properties. Making bolts which are fit for service requires in-depth understanding of all aspects of the job.
Alan Denney
AKD Materials Consulting Ltd
--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To post to this group, send email to material...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/446d60dc-1874-4d29-8cb2-54ecaac10e2a%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
From: material...@googlegroups.com [mailto:material...@googlegroups.com] On Behalf Of Ajith Kumar
Sent: 19 July 2016 07:27
To: Materials & Welding <material...@googlegroups.com>
--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To post to this group, send email to material...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/446d60dc-1874-4d29-8cb2-54ecaac10e2a%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.