> On Jan 1, 2018, at 6:02 PM, Sam Harmon <
samuel...@gmail.com> wrote:
>
> We are having our weekly free and open to the public hours tomorrow, officially starting at 7pm, but I’ll likely be at the space by 6 (traffic permitting). For those coming by for the first time, the address is 3558 Lee Road, Shaker Heights 44120 (aka ’The Dealership’). Park in the north lot, and come all the way around to the very back of the building. You’ll pass through the Tunnel Vision Hoops area to get to our area.
>
> Agenda:
> -To start the year off right, we’re going to do a group project!
> We’re going to work on implementing some decent dust collection for the Shop Zone. This will involve cutting & gluing PVC pipe and fittings, and setting up our new mobile dust collection bench. If necessary, we may end up 3D printing some hose adapters and whatnot as well.
> -I also found some more bins for organizing, so I expect some more things will get organized ;-)
> -We may continue assembling the Snappy. We’ll definitely continue printing parts for it...
> -If those doesn’t strike your fancy, there will also be the typical Open Hours- bring something to work on and/or show off!
>
> See you there,
>
> Sam
--
You received this message because you are subscribed to the Google Groups "Makers' Alliance" group.
To unsubscribe from this group and stop receiving emails from it, send an email to
makersalliance+unsubscribe@ googlegroups.com.
To post to this group, send email to
makersalliance@googlegroups. com.
For more options, visit
https://groups.google.com/d/ optout.