3D Print Recycling Program - MAG Laboratory

[Brian Seo]

Everyone,

MAG Laboratory has started a 3D print recycling program. If you have any 3D prints you wish to throw away, please place it in the appropriate recycling bin, shown in the image. A member will then send the material to a recycling service that then recycles the plastic into 3D printer filament.

Thank you for your attention.

- Brian

[Trent]

Please display image for reference of the potential member to using the said recycling program available for use at the maglabs so they can know the correct position of recycling receptical for use by the members reference.  please attention to the groups forum for image for reference so all member can see image available for reference.

best year, thank you.

[Brian Seo]

As requested, attached is the image.

--
You received this message because you are subscribed to the Google Groups "MAG Lab" group.
To unsubscribe from this group and stop receiving emails from it, send an email to maglaboratory+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[Trenton Wilson]

thank you for fulfilling the request for available images for reference of recycling program at maglabs.  i see this image contains a bin labeled "aluminum cans only".  is this the bin for recycling 3d printed parts when they are failed for discarded?

[Trent]

Please attention all member, i have found da wae of the 3d printing polymer recycling program at maglabs for reference please bring notice to image attached inside.  Most note two devices for recycling plastics of the PLA type and the ABS types here in having two devices separate for the recycling of plastics used in the 3d printing at maglabs.  Recycling Program is below the station of 3d printers.

most luck
best regards

[Jacob Christ]

That was about to be my next question. Great. Where is the filament re extruded? 

[Jacob Christ]

Got one...

[Trenton Wilson]

Dear Jacob,

I see you know da wae of 3d printing spaghetti, much opportunity here also considering you have sauced the bed with glue stick.

[Bradley Hanstad]

Someone touched your spaghet... U do not kno da wae. Da wae of da devil

[Trenton Wilson]

wer is da princesss?

[Brandin Watson]

This thread is approved for human consumption.

[Brian Seo]

Oh whoops. Didn't even notice I attached the wrong photo until now. My mistake.

The member has backed a Kickstarter project that takes your filament waste and recycles it for you. She has offered to take the plastic waste and send it over for us. Therefore, she is leading this program.

[Trenton Wilson]

so if she's leading the program, surely  she must know da wae.

[Brian Seo]

Possibly. She hasn't accepted the invite into this group (probably just busy). So the ways remain a mystery...for now...

[Trenton Wilson]

she must be da qween, the qween, she knows da wae

[BLawlor]

qween hear. she no da wae of recycle and belong google group but slacker wi da email.

---

From: Trenton Wilson <trentonc...@gmail.com>
To: maglaboratory <maglab...@googlegroups.com>
Sent: Monday, February 26, 2018 12:26 PM
Subject: Re: [maglab] Re: 3D Print Recycling Program - MAG Laboratory

To unsubscribe from this group and stop receiving emails from it, send an email to maglaborator...@googlegroups.com.

[BLawlor]

And she go by name Betsy.

---

From: BLawlor <law...@sbcglobal.net>
To: "maglab...@googlegroups.com" <maglab...@googlegroups.com>
Sent: Wednesday, February 28, 2018 8:09 PM

[Trenton Wilson]

XD

On Wed, Feb 28, 2018 at 8:11 PM, BLawlor <law...@sbcglobal.net> wrote:

And she go by name Betsy.

---

From: BLawlor <law...@sbcglobal.net>
To: "maglaboratory@googlegroups.com" <maglaboratory@googlegroups.com>

Sent: Wednesday, February 28, 2018 8:09 PM

Subject: Re: [maglab] Re: 3D Print Recycling Program - MAG Laboratory

qween hear. she no da wae of recycle and belong google group but slacker wi da email.

---

From: Trenton Wilson <trentonc...@gmail.com>

To: maglaboratory <maglaboratory@googlegroups.com>

To unsubscribe from this group and stop receiving emails from it, send an email to maglaboratory+unsubscribe@googlegroups.com.

For more options, visit https://groups.google.com/d/optout.

--
You received this message because you are subscribed to the Google Groups "MAG Lab" group.

To unsubscribe from this group and stop receiving emails from it, send an email to maglaboratory+unsubscribe@googlegroups.com.

For more options, visit https://groups.google.com/d/optout.

--
You received this message because you are subscribed to the Google Groups "MAG Lab" group.

To unsubscribe from this group and stop receiving emails from it, send an email to maglaboratory+unsubscribe@googlegroups.com.

[Brian Seo]

All,

MAG Laboratory's Recycling Queen, Betsy, has expanded her recycling efforts. Attached picture shows the new ear plus dispenser, modified so it can accept both individual ear plugs and ear plug packets. The original box was converted into a metal scrap bin. So if you ever find or have any small metal scrap that cannot be re-purposed nor machined, please place it in the box (picture attached). Our Queen will then take the scrap home to include with the metal recyclables she already has sorted.

Thank you.

Sincerely,

Brian

On Thu, Mar 1, 2018 at 2:22 PM, Trenton Wilson <trentonc...@gmail.com> wrote:

XD

On Wed, Feb 28, 2018 at 8:11 PM, BLawlor <law...@sbcglobal.net> wrote:

And she go by name Betsy.

---

From: BLawlor <law...@sbcglobal.net>
To: "maglab...@googlegroups.com" <maglab...@googlegroups.com>

Sent: Wednesday, February 28, 2018 8:09 PM

Subject: Re: [maglab] Re: 3D Print Recycling Program - MAG Laboratory

qween hear. she no da wae of recycle and belong google group but slacker wi da email.

---

From: Trenton Wilson <trentonc...@gmail.com>

To: maglaboratory <maglab...@googlegroups.com>

[Rosa Cho]

The memes have come. May god have mercy on us all.