I have all the electrical interconnects you will need… When can I meet with you?
--
You received this message because you are subscribed to the Google Groups "LVL1 - Louisville's Hackerspace" group.
To unsubscribe from this group and stop receiving emails from it, send an email to
lvl1+uns...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
To unsubscribe from this group and stop receiving emails from it, send an email to lvl1+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "LVL1 - Louisville's Hackerspace" group.
To unsubscribe from this group and stop receiving emails from it, send an email to lvl1+unsubscribe@googlegroups.com.
Exactly what I …ummmm…. 6Ga?
Mine may be a wee bit beefy. Made to handle 42AH of batteries to dump in < 3 min J
[Yeah, 210A per motor I think]
So, 1 Ga wire.
However, smaller gauge should be fine, as long as you get a crimping guy/gal with a seriously strong grip J
I’ll try to swing by tomorrow
From: lv...@googlegroups.com [mailto:lv...@googlegroups.com]
On Behalf Of David Ortiz-Grob
Sent: Thursday, August 03, 2017 3:15 PM
To: lv...@googlegroups.com
Subject: Re: [EXT] {LVL1} Power wheel improvements - call for donations/potential FAP? discussion thread
I'll be at the space tonight and tomorrow and again on tuesday. Specifically we're looking for single pole 6-10awg connectors much like the ones you probably used on the battle bots.
On Thu, Aug 3, 2017 at 3:11 PM, McCarthy, Patrick (GE Appliances, Non-GE) <patrick....@geappliances.com> wrote:
I have all the electrical interconnects you will need… When can I meet with you?
From: lv...@googlegroups.com [mailto:lv...@googlegroups.com] On Behalf Of David Ortiz-Grob
Sent: Thursday, August 03, 2017 3:08 PM
To: lv...@googlegroups.com
Subject: [EXT] {LVL1} Power wheel improvements - call for donations/potential FAP? discussion thread
So for those that don't know the, firetruck/roomba combination (worse known as Burnadette) did relatively well at Maker Faire Detroit, putting down close to reasonable lap times before the steering broke irreparably. While we have the momentum and institutional memory, I'd like to work on continuing to improve it to make it more competitive for milwaukee/detroit next year. It won't cost a ton of money and it would increase our profile at Maker events in addition to being a fun project. To be clear, The ROI would probably still be negative since we don't do much recruiting at regional maker faires but the outlay wouldn't be huge. Probably only a couple hundred dollars for wheels/tires, a proper seat, some better electrical quick connects/wiring, maybe pedals.
Is this something you would support spending club money on and/or want to contribute personally to?
--
You received this message because you are subscribed to the Google Groups "LVL1 - Louisville's Hackerspace" group.
To unsubscribe from this group and stop receiving emails from it, send an email to lvl1+uns...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "LVL1 - Louisville's Hackerspace" group.
To unsubscribe from this group and stop receiving emails from it, send an email to lvl1+uns...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "LVL1 - Louisville's Hackerspace" group.
To unsubscribe from this group and stop receiving emails from it, send an email to lvl1+uns...@googlegroups.com.
Exactly what I …ummmm…. 6Ga?
Mine may be a wee bit beefy. Made to handle 42AH of batteries to dump in < 3 min J
[Yeah, 210A per motor I think]
So, 1 Ga wire.
However, smaller gauge should be fine, as long as you get a crimping guy/gal with a seriously strong grip J
I’ll try to swing by tomorrow
From: lv...@googlegroups.com [mailto:lv...@googlegroups.com] On Behalf Of David Ortiz-Grob
Sent: Thursday, August 03, 2017 3:15 PM
To: lv...@googlegroups.com
Subject: Re: [EXT] {LVL1} Power wheel improvements - call for donations/potential FAP? discussion thread
I'll be at the space tonight and tomorrow and again on tuesday. Specifically we're looking for single pole 6-10awg connectors much like the ones you probably used on the battle bots.
On Thu, Aug 3, 2017 at 3:11 PM, McCarthy, Patrick (GE Appliances, Non-GE) <patrick.mccarthy2@geappliances.com> wrote:
I have all the electrical interconnects you will need… When can I meet with you?
From: lv...@googlegroups.com [mailto:lv...@googlegroups.com] On Behalf Of David Ortiz-Grob
Sent: Thursday, August 03, 2017 3:08 PM
To: lv...@googlegroups.com
Subject: [EXT] {LVL1} Power wheel improvements - call for donations/potential FAP? discussion thread
So for those that don't know the, firetruck/roomba combination (worse known as Burnadette) did relatively well at Maker Faire Detroit, putting down close to reasonable lap times before the steering broke irreparably. While we have the momentum and institutional memory, I'd like to work on continuing to improve it to make it more competitive for milwaukee/detroit next year. It won't cost a ton of money and it would increase our profile at Maker events in addition to being a fun project. To be clear, The ROI would probably still be negative since we don't do much recruiting at regional maker faires but the outlay wouldn't be huge. Probably only a couple hundred dollars for wheels/tires, a proper seat, some better electrical quick connects/wiring, maybe pedals.
Is this something you would support spending club money on and/or want to contribute personally to?
--
You received this message because you are subscribed to the Google Groups "LVL1 - Louisville's Hackerspace" group.
To unsubscribe from this group and stop receiving emails from it, send an email to lvl1+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "LVL1 - Louisville's Hackerspace" group.
To unsubscribe from this group and stop receiving emails from it, send an email to lvl1+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "LVL1 - Louisville's Hackerspace" group.
To unsubscribe from this group and stop receiving emails from it, send an email to lvl1+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "LVL1 - Louisville's Hackerspace" group.
To unsubscribe from this group and stop receiving emails from it, send an email to lvl1+unsubscribe@googlegroups.com.
The exact ones we were discussing before you left (That I got from McMaster)
I GARUNTEE that they will do exactly what you want them to J)
To unsubscribe from this group and stop receiving emails from it, send an email to lvl1+uns...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "LVL1 - Louisville's Hackerspace" group.
To unsubscribe from this group and stop receiving emails from it, send an email to lvl1+uns...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "LVL1 - Louisville's Hackerspace" group.
To unsubscribe from this group and stop receiving emails from it, send an email to lvl1+uns...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "LVL1 - Louisville's Hackerspace" group.
To unsubscribe from this group and stop receiving emails from it, send an email to lvl1+uns...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "LVL1 - Louisville's Hackerspace" group.
To unsubscribe from this group and stop receiving emails from it, send an email to lvl1+uns...@googlegroups.com.
To unsubscribe from this group and stop receiving emails from it, send an email to lvl1+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "LVL1 - Louisville's Hackerspace" group.
To unsubscribe from this group and stop receiving emails from it, send an email to lvl1+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "LVL1 - Louisville's Hackerspace" group.
To unsubscribe from this group and stop receiving emails from it, send an email to lvl1+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "LVL1 - Louisville's Hackerspace" group.
To unsubscribe from this group and stop receiving emails from it, send an email to lvl1+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "LVL1 - Louisville's Hackerspace" group.
To unsubscribe from this group and stop receiving emails from it, send an email to lvl1+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "LVL1 - Louisville's Hackerspace" group.
To unsubscribe from this group and stop receiving emails from it, send an email to lvl1+unsubscribe@googlegroups.com.
To unsubscribe from this group and stop receiving emails from it, send an email to lvl1+uns...@googlegroups.com.
--
That’s the second largest I have ever seen
(Largest – For Rigging Shore Power lines in an emergency… inner dia was ~2”)
(It was a big ratcheting thing… toke 5-6 pumps to close the jaws)
To unsubscribe from this group and stop receiving emails from it, send an email to lvl1+uns...@googlegroups.com.
There were basically exactly enough of the already wired quick connects to get everything set up with a set up including 6 spares for the second set of batteries. Even got everything color coded!Thanks again
To unsubscribe from this group and stop receiving emails from it, send an email to lvl1+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "LVL1 - Louisville's Hackerspace" group.
To unsubscribe from this group and stop receiving emails from it, send an email to lvl1+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "LVL1 - Louisville's Hackerspace" group.
To unsubscribe from this group and stop receiving emails from it, send an email to lvl1+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "LVL1 - Louisville's Hackerspace" group.
To unsubscribe from this group and stop receiving emails from it, send an email to lvl1+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "LVL1 - Louisville's Hackerspace" group.
To unsubscribe from this group and stop receiving emails from it, send an email to lvl1+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "LVL1 - Louisville's Hackerspace" group.
To unsubscribe from this group and stop receiving emails from it, send an email to lvl1+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "LVL1 - Louisville's Hackerspace" group.
To unsubscribe from this group and stop receiving emails from it, send an email to lvl1+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "LVL1 - Louisville's Hackerspace" group.
To unsubscribe from this group and stop receiving emails from it, send an email to lvl1+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "LVL1 - Louisville's Hackerspace" group.
To unsubscribe from this group and stop receiving emails from it, send an email to lvl1+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "LVL1 - Louisville's Hackerspace" group.
To unsubscribe from this group and stop receiving emails from it, send an email to lvl1+unsubscribe@googlegroups.com.
Not 100% Sure, but I think larger. They were the largest that Grainger had
(I was pushing, at peak, 400Amps thru them. The Connectors never failed (Had some 1Ga Wire melt… never the connector)
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Patrick McCarthy
T +1.502.452.4071
From: lv...@googlegroups.com [mailto:lv...@googlegroups.com]
On Behalf Of David Ortiz-Grob
Sent: Monday, April 16, 2018 9:37 AM
To: lv...@googlegroups.com
Subject: Re: [EXT] {LVL1} Power wheel improvements - call for donations/potential FAP? discussion thread
Are these big powerpoles the 75A size? We're working on a new 48V powerwheels build and want to get more
On Mon, Aug 14, 2017 at 10:08 AM, David Ortiz-Grob <david.or...@gmail.com> wrote:
Yep! got the small connectors that were slated for the submarine to work with the motors on Burnadette so that the whole electronics board can be easily removed for work or to get it out of the way for mechanical maintenance
On Sun, Aug 13, 2017 at 11:18 AM, Brian Wagner <br...@tegrasys.com> wrote:
very nice!
On Sun, Aug 13, 2017 at 5:33 AM, David Ortiz-Grob <david.or...@gmail.com> wrote:
There were basically exactly enough of the already wired quick connects to get everything set up with a set up including 6 spares for the second set of batteries. Even got everything color coded!
Thanks again
On Mon, Aug 7, 2017 at 3:28 PM McCarthy, Patrick (GE Appliances, Non-GE) <patrick....@geappliances.com> wrote:
That’s the second largest I have ever seen
(Largest – For Rigging Shore Power lines in an emergency… inner dia was ~2”)
(It was a big ratcheting thing… toke 5-6 pumps to close the jaws)
From: 'Lockadoc' via LVL1 - Louisville's Hackerspace [mailto:lv...@googlegroups.com]
Sent: Saturday, August 05, 2017 2:05 AM
To: lv...@googlegroups.com
Subject: Re: [EXT] {LVL1} Power wheel improvements - call for donations/potential FAP? discussion thread
If you need to crimp some large wire
I have a large crimper I could let you use.
Bill S
Sent from my iPhone
To unsubscribe from this group and stop receiving emails from it, send an email to lvl1+uns...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "LVL1 - Louisville's Hackerspace" group.
To unsubscribe from this group and stop receiving emails from it, send an email to lvl1+uns...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "LVL1 - Louisville's Hackerspace" group.
To unsubscribe from this group and stop receiving emails from it, send an email to lvl1+uns...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "LVL1 - Louisville's Hackerspace" group.
To unsubscribe from this group and stop receiving emails from it, send an email to lvl1+uns...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "LVL1 - Louisville's Hackerspace" group.
To unsubscribe from this group and stop receiving emails from it, send an email to lvl1+uns...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "LVL1 - Louisville's Hackerspace" group.
To unsubscribe from this group and stop receiving emails from it, send an email to lvl1+uns...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "LVL1 - Louisville's Hackerspace" group.
To unsubscribe from this group and stop receiving emails from it, send an email to lvl1+uns...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "LVL1 - Louisville's Hackerspace" group.
To unsubscribe from this group and stop receiving emails from it, send an email to lvl1+uns...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "LVL1 - Louisville's Hackerspace" group.
To unsubscribe from this group and stop receiving emails from it, send an email to lvl1+uns...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "LVL1 - Louisville's Hackerspace" group.
To unsubscribe from this group and stop receiving emails from it, send an email to lvl1+uns...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "LVL1 - Louisville's Hackerspace" group.
To unsubscribe from this group and stop receiving emails from it, send an email to lvl1+uns...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "LVL1 - Louisville's Hackerspace" group.
To unsubscribe from this group and stop receiving emails from it, send an email to lvl1+uns...@googlegroups.com.
--