Hello all, wonder if anyone can help or has seen this problem before.
I've had my Loxone system powered off for the last 2 months whilst the builders have been in. Returned last weekend to check things over and to add 2 more temp probes for rooms that I've added UFH in.
However after powering on the system and immediately installing the latest MiniServer update 10.3.11.25 (stupid me, I should have checked everything first), none of my 1-wire sensors were detected.
See attached report, where I get the CRC errors - but I can assure you there is nothing wrong with the sensor cabling or the number of sensors
1-Wire Serial 28.42.AF.96.06.00.00.60: 6177 Packet Requests, 6178 CRC Errors, 0 85 Degree Problems
I have 2 1-wire extensions, I use one for Bus topology and the other for Star - both have the same problem.
What I've checked so far (please see attachments);
- Escalated to Loxone Support, who provided me a new version 10.3.11.27 - but that did not work, now Support team have gone silent
- I have removed both extensions from the config, and only added one back in, makes no difference - extension is online but no sensors detected
- Confirmed both extension were getting +5V against GND
- Removed all sensors, and connected a brand new previously unused probe, nothing appeared in LoxoneConfig in the 1-wire device search
So I'm not sure if this is an issue with the latest MiniServer Config (unlikely) or more likely a hardware problem with the 1-wire extensions. Really don't want to order another extension for +160GBP from the webshop.
All the best
Chris