inconsistent contact between MR3040 and flash drive

[Allan Lee]

I am using an MR3040 LibraryBox with a SanDisk 128GB Cruzer Fit 3.0 flash drive. I recently noticed that sometimes after removing the drive and reinserting it that it doesnꞌt always make a good connection, even though it feels like it fits pretty snugly. Is there something I should clean on the unit or the flash drive, or might the unit or the flash drive be failing?

[Jason Griffey]

I have never seen this, but it sounds like maybe either the drive or the router have corrosion or something on the USB contact pads? That's the thing I would check first....they can be cleaned with soft cloth.

Jason

On Mon, Oct 23, 2017 at 5:17 PM Allan Lee <all...@gmail.com> wrote:

I am using an MR3040 LibraryBox with a SanDisk 128GB Cruzer Fit 3.0 flash drive. I recently noticed that sometimes after removing the drive and reinserting it that it doesnꞌt always make a good connection, even though it feels like it fits pretty snugly. Is there something I should clean on the unit or the flash drive, or might the unit or the flash drive be failing?

--
You received this message because you are subscribed to the Google Groups "LibraryBox" group.
To unsubscribe from this group and stop receiving emails from it, send an email to librarybox+...@googlegroups.com.
To post to this group, send email to libra...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/librarybox/8ebbfb1f-f95a-4b56-955a-52f97a38bb93%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[Matthias Strubel]

You are switching the device off for removing the USB stick, aren't you?

Best regards Matthias 

To view this discussion on the web visit https://groups.google.com/d/msgid/librarybox/CA%2BUAGrN%2B3hqN9J3q9pOC%2B4LogZ_xezsfb-4-w3Gcn2yJqkDoZg%40mail.gmail.com.