HiI downloaded Pennsylvania lidar data. It is as a las file. But it is in feet. I need to convert it to meters. I was told that las2las would do it.The area I need is on the corner of four tiles. So, do I have to use lasmerge, then lastile followed by las2las?Or can las2las do the whole process in one step?I'm able to get the files into left hand corner. I filled out NAD83, NAVD88,Geoid03 in projection tab. Using the clip function on the bottom I can put a red rectangle around the area I want. I can view it. Choose where I want to copy it. But, I get stuck after clicking on RUN and START. I thought that using UTM as an output would do the trick. So far I failed.The black screen tells me: could not find c:\program files\las2las\lastools\bin\file_list. 8884.txtThe number is always different with any attempt.Could anybody please give me an advise? What am I missing?Petr
Note that not all of LAStools is "free" (see http://lastools.org/LICENSE.txt)
contact 'martin.isenburg@rapidlasso.com' to clarify licensing terms if needed.
lasview -lof file_list.4728.txt -inside 2596632.75 444376.125 2605624 456555.218
8
Could Not Find C:\Program Files\las2las\LAStools\bin\file_list.4728.txt
lasmerge -lof file_list.4728.txt -inside 2596632.75 444376.125 2605624 456555.21
88 -o "merged8-1.las" -sp83 PA_S -feet -vertical_navd88_geoid03
using state plane 'PA_S' (NAD83 LCC) 'NAD83 / Pennsylvania South'
Could Not Find C:\Program Files\las2las\LAStools\bin\file_list.4728.txt
--
Download LAStools at
http://lastools.org
http://rapidlasso.com
Be social with LAStools at
http://facebook.com/LAStools
http://twitter.com/LAStools
http://linkedin.com/groups/LAStools-4408378
Manage your settings at
http://groups.google.com/group/lastools/subscribe
Hello,could you post a link (a link!!! please do not attach) to a small tile of example data? It will be easier to develop the correct command line for your case if you give us some sample data to test with.Regards,Martin @rapidlassoOn Wed, Aug 2, 2017 at 3:06 AM, flabbergasted.sassafras via LAStools - efficient tools for LiDAR processing <last...@googlegroups.com> wrote:HiI downloaded Pennsylvania lidar data. It is as a las file. But it is in feet. I need to convert it to meters. I was told that las2las would do it.The area I need is on the corner of four tiles. So, do I have to use lasmerge, then lastile followed by las2las?Or can las2las do the whole process in one step?I'm able to get the files into left hand corner. I filled out NAD83, NAVD88,Geoid03 in projection tab. Using the clip function on the bottom I can put a red rectangle around the area I want. I can view it. Choose where I want to copy it. But, I get stuck after clicking on RUN and START. I thought that using UTM as an output would do the trick. So far I failed.The black screen tells me: could not find c:\program files\las2las\lastools\bin\file_list. 8884.txtThe number is always different with any attempt.Could anybody please give me an advise? What am I missing?PetrNote that not all of LAStools is "free" (see http://lastools.org/LICENSE.txt)
contact 'martin....@rapidlasso.com' to clarify licensing terms if needed.
---
You received this message because you are subscribed to the Google Groups "LAStools - efficient tools for LiDAR processing" group.
To unsubscribe from this group and stop receiving emails from it, send an email to lastools+u...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/lastools/ec05d2c9-e43f-408b-8595-b6f6c829ba8fn%40googlegroups.com.