The ioio-otg is upgradeable only via PC, right? When connecting otg to PC, the is no driver found on PC (windows 8.1). How to get right driver to loaded in PC, github offer only a ioio.inf for drivers.
1.How to get drivers to PC?
2. Can the firmware uploading be done direct via android device (as IOIO-manager with V1 board)?
OK, The IOIO-OTG driver (TDFI) is now on com port 7 (USB). To upgrade the firmware I downloaded IOIOdude files. I tried to open ioiodude.jar, no success. Assuming IOIOdude should be the port to update the firmware? So how it goes in practice, how to execute the IOIOdude(.jar?) and export the firmware to ioio-OTG? Have to say the older IOIO v1 with ioio manager was delight combination, indeed ;)
Please read the wiki page about ioiodude. I bet it will answer most your questions.
--
You received this message because you are subscribed to the Google Groups "ioio-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to ioio-users+...@googlegroups.com.
To post to this group, send email to ioio-...@googlegroups.com.
Visit this group at http://groups.google.com/group/ioio-users.
For more options, visit https://groups.google.com/d/optout.
We have now upgraded the ioio-otg to highest firmware (also the second highest version), but no success to connect or command the ioio-otg with earlier application software programmed to v1 board.
I've measured the pin voltages, with OTG, pins passive, with v1 giving 3.2V, when commanded.
The IOIO-OTG do not detect USB-debugging, while V1 establish debugging for shure. These test made with traditional Android v.4.3
We would use the V1 in the future too, but unfortunately the new android POS device has old "big" USB slave-ports only. Is it possible to import ioio-drivers to Android device, or simply easier try to find android mother board or POS device with OTG USB connection included?