Remote connect to FCD Pro.

[Dmitry Budanov]

Hi.

I'm try to use remote FCD Pro with GQRX. Can i use borip source (from gr-baz - https://github.com/balint256/gr-baz.git) as source for GQRX? Integrate borip source with GQRX may be usefull because borip server can easy extend to support any hardware supported by gnuradio.

73, Dmitry

[Alexandru Csete]

Hi Dmitry,

Adding a new backend support to gqrx requires more time than I have at
the moment, so I suggest you take a look at using the SoapySDR backend
in gr.-osmosdr: https://github.com/pothosware/SoapySDR/wiki

SoapySDR has the capability of providing remote access; however, I am
not sure if it supports Funcube Dongle Pro.

Alex

> --
> You received this message because you are subscribed to the Google Groups
> "Gqrx SDR" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to gqrx+uns...@googlegroups.com.
> To post to this group, send email to gq...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/gqrx/d7c0f0ad-d790-4fbc-b356-4df2f1cd96db%40googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.

[Dmitry Budanov]

Thank you for answer. I'm try to use Soapy.

You received this message because you are subscribed to a topic in the Google Groups "Gqrx SDR" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/gqrx/sYCqxNtmSf4/unsubscribe.
To unsubscribe from this group and all its topics, send an email to gqrx+uns...@googlegroups.com.

To post to this group, send email to gq...@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/gqrx/CAHG%3DS_fCtiw0yU6_RPKPegP8cVEzYhrS%3D-qrsj0jMtaeMSWvEw%40mail.gmail.com.

[Dmitry Budanov]

Hi.

I'm build Soapy and successfully connected from client to server but how can i use it from GQRX? What device and device settings?

73, Dmitry

[Alexandru Csete]

Hi Dmitry,

I have not used it myself, but I found this on their wiki:
https://github.com/pothosware/SoapyRemote/wiki#grosmosdr-remote-devices

So, I guess that you start the soapysdr server, then in gqrx use a
device string like:

soapy=0,driver=remote,remote=1.2.3.4

where 1.2.3.4 is the IP address of the server.
Can you try and see if it works?

Alex

On Mon, Feb 22, 2016 at 4:10 PM, Dmitry Budanov <bdn...@gmail.com> wrote:
> Hi.
>

[Dmitry Budanov]

I'm try this way to connect but without success. I'm see TCP connection on server side but do not see stream on client side.

--
You received this message because you are subscribed to a topic in the Google Groups "Gqrx SDR" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/gqrx/sYCqxNtmSf4/unsubscribe.
To unsubscribe from this group and all its topics, send an email to gqrx+uns...@googlegroups.com.
To post to this group, send email to gq...@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/gqrx/CAHG%3DS_f7nigKF1sYkPq8Y%3DcjxuKByuv7pQ8TR%2B32qqJZDvsBBA%40mail.gmail.com.

[Jose Martinez Jr.]

Alexandru,

Was there a resolution to Dmitry's issue. I'm also attempting to connect to a remote rtl_sdr dongle running on a SopySDRServer. It works fine using osmocom_fft with this device string

"soapy=0,driver=remote,remote=sdr". When I try with gqrx I don't get a connection on the server. I've tried more specific strings like "soapy=0,driver=remote,remote=sdr,remote:driver=rtlsdr" to no avail.

It seemed to me from reading these posts that you think this should work correct ?

Any suggestions ?

[Alexandru Csete]

It should work, but I have never tried it myself. The only thing I
have tried is using SDR Play device through the SoapySDR backend.

> Any suggestions ?

All I can suggest is to file an issue on github, otherwise I will
forget about it in a few days. Just post the info you provided here
and I will try to take a look at it after the 2.6 release.

Alex

[Jose Martinez Jr.]

Will do....Thanks