You do not have permission to delete messages in this group
Copy link
Report message
Sign in to report message
Show original message
Either email addresses are anonymous for this group or you need the view member email addresses permission to view the original message
to Gqrx SDR
OS: Arch Linux Gqrx version v2.11.2-2-g7 Gqrx and Gnuradio installed through AUR
For some reason Gqrx have this big ~2MHz wide noise at center frequency and it is very insensitive to even FM signal, needing more than 40 dB PGA gain. It cannot even see wifi signals at 2.45 GHz. However, when I made my own spectrum analyzer through Gnuradio companion:
UHD: USRP source => Qt fosphor sink or UHD: USRP source => QT GUI Frequency sink
the 2MHz noise is gone, the B210 is much more sensitive, requiring only abou 20dB of PGA gain to see FM signal, and it can see wifi signals.
Gqrx photo attached, sorry for not screenshotting. I will make a proper bug report next week when I have access to USRP B210 again
You do not have permission to delete messages in this group
Copy link
Report message
Sign in to report message
Show original message
Either email addresses are anonymous for this group or you need the view member email addresses permission to view the original message
to Gqrx
You have to try the gr-osmosdr source in gnuradio to compare, not the
UHD source.
I can't fix this in gqrx, so it will be waste of time opening a bug in
the gqrx bug tracker.