On Mon, Sep 18, 2017 at 10:13 AM, ron preston <prestc...@gmail.com>
wrote:
On Mon, Sep 18, 2017 at 1:50 PM, Cesar Carrasco <c.carra...@gmail.com>
wrote:
When installing the panels, 2 person is best to put the sides in then get something that's 30" or so wide
by the length of the panel, to push the panel center up, or you'll stand a chance of cracking it dew to
openings. The hardest panels to install for me was over the fridge/galley and the rear going into closet/shower (without braking).
If you use some upholstery material, use only DAP Weldwood HHR #70798 00095 contact glue (High Heat Resistant) look for at upholstery suppliers. Or
the material will come down in the heat of summer.
For insulation I used foam boards from HD or Lowes, 2 layers of 3/4" and can foam for glue. You must hold the pieces in place until the foam sets, the
expansion will dislodge the piece. About the OEM foam, I used a scraper to remove it. I feel that foam wasn't for insulation but more for sound
control. MacMaster-Carr sells spray foam in small containers size.
Need more, text or call.
ron preston wrote on Mon, 18 September 2017 10:13
--
”When we avoid the mistakes we might have made, we sometimes make the mistakes that we might have avoided.”
Adrien & Jenny Genesoto
75 Glenbrook 26-3
Yuba City,Ca. Text 530-nine-3-three-3-nine-nine-6
I'm using FRP panels from Lowes. They also sell a variety of trim strips that fit the FRP.
Dennis
ron preston wrote on Mon, 18 September 2017 12:13
--
Dennis S
73 Painted Desert 230
Memphis TN Metro
Another source for trim - more for edges of wall panels around windows.
Dennis
Dennis S wrote on Mon, 18 September 2017 17:12
> I'm replacing my headliner, and I want to find a source for the plastic mouldings etc. I had bookmarked a source from this forum but accidentally deleted it. Iwas thinking of replacing the cardboard/foam backing with 1/4 bendable plywood. Any other suggestions? Also what are you all using for additional insulation?
Here’s what I did with FRP and isocyanurate insulation board:
Ceiling Replacement <http://www.jcmco.com/gallery/album01>
—Jim
Jim Miller
1977 Eleganza
1977 Royale
Hamilton, OH
Mike in NS
--
Michael Beaton
1977 Kingsley 26-11
1977 Eleganza II 26-3
Antigonish, NS
Life is too short to hold a grudge; slash some tires and call it even !