Show and tell

[Anthony]

Show and tell:

Hi All,
        I wanted to share some pictures of a recent frame I built back in January.
I used the last of my Super Vitus GTI tubing, modified Bocama lugs,  a
modified Haden Europa crown and a Meile bottom bracket, that I
purchased from someone on the list with a thick thread wall to allow a long chamfer cut, so my
customer could use a Schlumph  BB / crank set.

   The seat stay eyes  are 14 mm, long tapered, double fluted, and wrap a round
that I made.
   I also made the plate style brake bridge to handle standard  short
reach Brakes and the Shimano direct fit brakes, as well as a a pair of
studs for the same on the fork.
             https://picasaweb.google.com/116710748184270878957/RalphSVFrameSet1192016
P.S.  (If the person I bought
        the Miele BB from has any more BB's please contact me.)

Anthony
Mezzatesta Custom Cycles
Cranberry Twp. PA. 16066
www.mezzatestacustomcycles.com
You have been sent 12 pictures.

[Anthony]

 

Sorry about the repost  I had a bad link if your interested try the new link below,

Anth

 

 

Show and tell:

Hi All,
        I wanted to share some pictures of a recent frame I built back in January.
I used the last of my Super Vitus GTI tubing, modified Bocama lugs,  a
modified Haden Europa crown and a Meile bottom bracket, that I
purchased from someone on the list with a thick thread wall to allow a long chamfer cut, so my
customer could use a Schlumph  BB / crank set.

   The seat stay eyes  are 14 mm, long tapered, double fluted, and wrap a round
that I made.
   I also made the plate style brake bridge to handle standard  short
reach Brakes and the Shimano direct fit brakes, as well as a a pair of
studs for the same on the fork.

             https://goo.gl/photos/tyx2xBDh88WLyssf9

[Cliff McLeroy]

Very nice! I'd like to see what it looks like with the brakes installed. Will you be doing the chamfer cut on the BB shell?

-Cliff