too high pressure

2 views

Skip to first unread message

elizalde tuquero

unread,

Sep 28, 2016, 1:43:26 AM9/28/16

to Epanet and Development

Hi guys,

Kindly help me analyze the EPANET of our existing water system. Please see attached epanet file. I labeled the ACTUAL MONITORING SITES ( ex. S1-PR1, S4-PR2 etc.), and indicated the average pressure which is from the actual reading from the installed pressure gauge in each site. My problem now is most NODES of the sites are reading too high pressure on the epanet compare to the actual. Kindly please help and check my Epanet and give some input on what is causing the problem. Thank you very much!