Laser is useable, but still has a wide ish kerf. Safe to use, and refer to the latest calibration grid.
I'll be taking it out of service again this weekend to try and poke it a bit further into alignment.
Thanks Bailey!
--
You received this message because you are subscribed to the Google Groups "Area515 - Des Moines Maker Space" group.
To unsubscribe from this group and stop receiving emails from it, send an email to dsmhackerspace+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
I'll be in tomorrow early afternoon.
When you say this weekend, when does that mean? I have 3 small items needed to be cut. Can I cut them first (I'll be coming 6 30 or 7 tonight) before you take it back out of order?
On Aug 17, 2017 11:36 PM, "Andy Davis" <andyda...@gmail.com> wrote:
Thanks Bailey!
--
You received this message because you are subscribed to the Google Groups "Area515 - Des Moines Maker Space" group.
To unsubscribe from this group and stop receiving emails from it, send an email to dsmhackerspac...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "Area515 - Des Moines Maker Space" group.
To unsubscribe from this group and stop receiving emails from it, send an email to dsmhackerspac...@googlegroups.com.
I'll be in tomorrow early afternoon.
On Sat, Aug 19, 2017, 14:45 Zeke Egherman <ze...@egherman.com> wrote:
When you say this weekend, when does that mean? I have 3 small items needed to be cut. Can I cut them first (I'll be coming 6 30 or 7 tonight) before you take it back out of order?
On Aug 17, 2017 11:36 PM, "Andy Davis" <andyda...@gmail.com> wrote:
Thanks Bailey!
--
You received this message because you are subscribed to the Google Groups "Area515 - Des Moines Maker Space" group.
To unsubscribe from this group and stop receiving emails from it, send an email to dsmhackerspace+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "Area515 - Des Moines Maker Space" group.
To unsubscribe from this group and stop receiving emails from it, send an email to dsmhackerspace+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "Area515 - Des Moines Maker Space" group.
To unsubscribe from this group and stop receiving emails from it, send an email to dsmhackerspace+unsubscribe@googlegroups.com.
After watching Zeke use the laser*, I have an idea for a new rule:If anyone outside of the person using the laser has to push the timer button, the person running the laser owes the other a dollar.Don*Zeke was not actually lasing at the time, I'm not calling him out to get in trouble. But the timer box ~was~ on.
On Sat, Aug 19, 2017 at 4:27 PM, Zeke Egherman <ze...@egherman.com> wrote:
Gotcha.
On Aug 19, 2017 4:26 PM, "Bailey Steinfadt" <runne...@gmail.com> wrote:
I'll be in tomorrow early afternoon.
On Sat, Aug 19, 2017, 14:45 Zeke Egherman <ze...@egherman.com> wrote:
When you say this weekend, when does that mean? I have 3 small items needed to be cut. Can I cut them first (I'll be coming 6 30 or 7 tonight) before you take it back out of order?
On Aug 17, 2017 11:36 PM, "Andy Davis" <andyda...@gmail.com> wrote:
Thanks Bailey!
--
You received this message because you are subscribed to the Google Groups "Area515 - Des Moines Maker Space" group.
To unsubscribe from this group and stop receiving emails from it, send an email to dsmhackerspac...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "Area515 - Des Moines Maker Space" group.
To unsubscribe from this group and stop receiving emails from it, send an email to dsmhackerspac...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "Area515 - Des Moines Maker Space" group.
To unsubscribe from this group and stop receiving emails from it, send an email to dsmhackerspac...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "Area515 - Des Moines Maker Space" group.
To unsubscribe from this group and stop receiving emails from it, send an email to dsmhackerspac...@googlegroups.com.
--
You received this message because you are subscribed to the Google Groups "Area515 - Des Moines Maker Space" group.
To unsubscribe from this group and stop receiving emails from it, send an email to dsmhackerspac...@googlegroups.com.
To unsubscribe from this group and stop receiving emails from it, send an email to dsmhackerspace+unsubscribe@googlegroups.com.
No, I've been dealing with a massive mold problem in my basement and extra hours at work and will get to it as soon as I am able.