Cubieez NANDkernel recompile on Cubieboard2
96 views
Skip to first unread message
Nigno Libero
Oct 15, 2015, 8:09:56 PM10/15/15
to Cubieboard
Hello,
few days ago I flashed the debieez image with Livesuit on Cubieboard2, found at this link:
http://dl.cubieboard.org/software/a20-cubieboard/debian/debieez-v1.01/ and was able to use it successfully.
Now I'm trying to update u-boot and recompile the kernel using the exact same kernel source files as in the working image indicated above. The *problem* is that using the procedures indicated below, I cannot make it to work.
I've tryed various approaches, like:
1) using the cubieboard2_defconfig file like .config
2) using the .config file extracted by the actual version of the running kernel
Both approaches use the following procedures:
a-
b-
In the mode exposed at point 1) the system won't start, giving many errors of loading modules; same happens when executing the command depmod.
With the mode exposed at point 2) my QT Application hangs. However, by pressing ctrt+\ keys (I found out this key combination by luck) for skipping the kernel loading block, the application starts correctly, but I don't have any prompt access via serial or have any correct ip assigned to access the board via ssh.
When downloading the kernel source files, I made sure to use the same kernel version as in the debieez-v1.01 that is ru same and the config file is extracted by the original running kernel.
I don't understand the problem: Can you help me please
Here is my log of /var/log/dmesg file:
However follow the guide of generate a new u-boot.bin file, while replace it the system won't start because the uboot search the kernel in mmc and not in nand...
Anyone can help me please ?
I'm so saldy.
If you require more details, please contact me also at nig...@gmail.com
few days ago I flashed the debieez image with Livesuit on Cubieboard2, found at this link:
http://dl.cubieboard.org/software/a20-cubieboard/debian/debieez-v1.01/ and was able to use it successfully.
Now I'm trying to update u-boot and recompile the kernel using the exact same kernel source files as in the working image indicated above. The *problem* is that using the procedures indicated below, I cannot make it to work.
I've tryed various approaches, like:
1) using the cubieboard2_defconfig file like .config
2) using the .config file extracted by the actual version of the running kernel
Both approaches use the following procedures:
a-
make uImage CROSS_COMPILE=arm-linux-gnueabihf- -j2 ARCH=arm
make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- -j2 INSTALL_MOD_PATH=output modules
make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- -j2 INSTALL_MOD_PATH=output modules_install
b-
copy the forlders output/lib/modules and output/lib/firmware in /dev/nandb/lib partitions
and update the uImage file in /dev/nandaIn the mode exposed at point 1) the system won't start, giving many errors of loading modules; same happens when executing the command depmod.
With the mode exposed at point 2) my QT Application hangs. However, by pressing ctrt+\ keys (I found out this key combination by luck) for skipping the kernel loading block, the application starts correctly, but I don't have any prompt access via serial or have any correct ip assigned to access the board via ssh.
When downloading the kernel source files, I made sure to use the same kernel version as in the debieez-v1.01 that is ru same and the config file is extracted by the original running kernel.
I don't understand the problem: Can you help me please
Here is my log of /var/log/dmesg file:
Booting Linux on physical CPU 0
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.4.79 (anto@noviacom-AsusTouch) (gcc version 4.8.2 (Ubuntu/Linaro 4.8.2-16ubuntu4) ) #1 SMP PREEMPT Mon Oct 12 12:41:51 CEST 2015
CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: sun7i
Memory Reserved:
SYS : 0x43000000 - 0x4300ffff ( 64 kB)
G2D : 0x50000000 - 0x50ffffff ( 16 MB)
LCD : 0x51000000 - 0x52ffffff ( 32 MB)
cma: CMA: reserved 192 MiB at 43c00000
Memory policy: ECC disabled, Data cache writealloc
sunxi: Allwinner A20 (AW1651/sun7i) detected.
On node 0 totalpages: 262144
free_area_init_node: node 0, pgdat c08f5c40, node_mem_map d3000000
DMA zone: 512 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 65024 pages, LIFO batch:15
Normal zone: 1008 pages used for memmap
Normal zone: 128016 pages, LIFO batch:31
HighMem zone: 528 pages used for memmap
HighMem zone: 67056 pages, LIFO batch:15
PERCPU: Embedded 7 pages/cpu @d3808000 s7232 r8192 d13248 u32768
pcpu-alloc: s7232 r8192 d13248 u32768 alloc=8*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260096
Kernel command line: console=tty0 root=/dev/nandb loglevel=8 console=ttyS0,115200 hdmi.audio=EDID:0 disp.screen0_output_mode=EDID:1280x720p50 rootwait panic=10 rootfstype=ext4 rootflags=discard vt.global_cursor_default=0 consoleblank=0
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
allocated 2097152 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Memory: 1024MB = 1024MB total
Memory: 780148k/780148k available, 268428k reserved, 270336K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc07fb448 (8142 kB)
.init : 0xc07fc000 - 0xc088fc40 ( 592 kB)
.data : 0xc0890000 - 0xc08fd428 ( 438 kB)
.bss : 0xc08fd44c - 0xc0acfde8 (1867 kB)
SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Preemptible hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
Additional per-CPU info printed with stalls.
NR_IRQS:192
Architected local timer running at 24.00MHz.
sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
start_kernel(): bug: interrupts were enabled early
Console: colour dummy device 80x30
console [tty0] enabled
Calibrating delay loop... 1816.98 BogoMIPS (lpj=9084928)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available
Setting up static identity map for 0x405a8928 - 0x405a8980
CPU1: Booted secondary processor
CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Brought up 2 CPUs
SMP: Total of 2 processors activated (3640.52 BogoMIPS).
devtmpfs: initialized
dummy:
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 8 bytes.
[ccu-inf] aw clock manager init
[ccu-inf] aw_ccu_init
[ccu-inf] script config pll3 to 297MHz
[ccu-inf] script config pll4 to 300MHz
[ccu-inf] script config pll6 to 600MHz
[ccu-inf] script config pll7 to 297MHz
[ccu-inf] script config pll8 to 336MHz
Init eGon pin module V2.0
bio: create slab <bio-0> at 0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Linux media interface: v0.10
Linux video capture interface: v2.00
Advanced Linux Sound Architecture Driver Version 1.0.25.
cfg80211: Calling CRDA to update world regulatory domain
Switching to clocksource arch_sys_counter
FS-Cache: Loaded
CacheFiles: Loaded
sw_hcd_host0 sw_hcd_host0: sw_hcd host driver
sw_hcd_host0 sw_hcd_host0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
config i2c gpio with gpio_config api
I2C: i2c-0: AW16XX I2C adapter
I2C: i2c-1: AW16XX I2C adapter
I2C: i2c-2: AW16XX I2C adapter
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pm: select wifi: rtl8192cu
wifi_pm: Unsupported wifi type!
[wifi_pm]: wifi gpio init is OK !!
[PM] bt is disable at script fex
audit: initializing netlink socket (disabled)
type=2000 audit(0.560:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
NFS: Registering the id_resolver key type
NTFS driver 2.1.30 [Flags: R/W].
fuse init (API version 7.18)
msgmni has been set to 1379
alg: comp: Compression test 1 failed for lzo-generic: output len = 57
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
sunxi disp driver loaded (/dev/disp api 1.0)
Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[uart]: used uart info.: 0x01
[uart]: serial probe 0 irq 33 mapbase 0x01c28000
sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 33) is a U6_16550A
console [ttyS0] enabled
G2D: drv_g2d_init
G2D: g2dmem: g2d_start=50000000, g2d_size=1000000
G2D: head:d0000000,tail:d1000000
G2D: Module initialized.major:250
brd: module loaded
loop: module loaded
[NAND] nand driver version: 0x2 0x9
Dev Sunxi softw311 nand magic does not match for MBR 1: softw411
Dev Sunxi softw311 nand magic does not match for MBR 2:
Dev Sunxi softw311 nand magic does not match for MBR 3:
Dev Sunxi softw311 nand magic does not match for MBR 4:
Dev Sunxi softw311 nand header bad for all MBR copies, MBR corrupted or not present.
Dev Sunxi softw411 nand mbr number does not match for MBR 2: 0
Dev Sunxi softw411 nand header: CRC bad for MBR 2
Dev Sunxi softw411 nand mbr number does not match for MBR 3: 0
Dev Sunxi softw411 nand header: CRC bad for MBR 3
Dev Sunxi softw411 nand mbr number does not match for MBR 4: 0
Dev Sunxi softw411 nand header: CRC bad for MBR 4
Dev Sunxi softw411 nand: part 1, start 32768, size 131072
Dev Sunxi softw411 nand: part 2, start 163840, size 7549747
Dev Sunxi softw411 nand: part 3, start 7713587, size 68813
nand: nanda nandb nandc
[NAND]nand driver, ok.
sw_ahci sw_ahci.0: controller can't do PMP, turning off CAP_PMP
sw_ahci sw_ahci.0: forcing PORTS_IMPL to 0x1
sw_ahci sw_ahci.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
sw_ahci sw_ahci.0: flags: ncq sntf pm led clo only pio slum part ccc
scsi0 : sw_ahci_platform
ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88
sunxi_emac Using mii phy on PortA
sunxi_emac Using MAC from SID: 02:12:03:c2:ea:c4
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[sw-ehci1]: open clock
[sw-ehci1]: Set USB Power ON
sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 2
sw-ehci sw-ehci.1: irq 71, io mem 0x01c14000
sw-ehci sw-ehci.1: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
ehci_irq: port change detect
[sw-ohci1]: open clock
sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 3
sw-ohci sw-ohci.1: irq 96, io mem 0x01c14400
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
[sw-ehci2]: open clock
ata1: SATA link down (SStatus 0 SControl 300)
[sw-ehci2]: Set USB Power ON
sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 4
sw-ehci sw-ehci.2: irq 72, io mem 0x01c1c000
sw-ehci sw-ehci.2: USB 2.0 started, EHCI 1.00
ehci_irq: port change detect
ehci_irq: port change detect
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
[sw-ohci2]: open clock
sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
The port change to OHCI now!
sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 5
sw-ohci sw-ohci.2: irq 97, io mem 0x01c1c400
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 1 port detected
mousedev: PS/2 mouse device common for all mice
input: sunxi-ir as /devices/virtual/input/input0
IR Initial OK
===========================hv_keypad_init=====================
========HV Inital ===================
tkey_fetch_sysconfig_para: tkey_unused.
hv_keypad_init: after fetch_sysconfig_para: normal_i2c: 0x0. normal_i2c[1]: 0x0
i2c i2c-0: Invalid probe address 0x00
i2c i2c-1: Invalid probe address 0x00
i2c i2c-2: Invalid probe address 0x00
rtc: parse pmu_backupen failed
usb 3-1: new low-speed USB device number 2 using sw-ohci
sunxi-rtc sunxi-rtc: Error: Set LOSC to external failed.
sunxi-rtc sunxi-rtc: Warning: RTC time will be wrong!
sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
i2c /dev entries driver
[ace_drv] start!!!
[ace_drv] init end!!!
[pa_drv] start!!!
[pa_drv] init end!!!
platform reg-20-cs-ldo2: Driver reg-20-cs-ldo2 requests probe deferral
platform reg-20-cs-ldo3: Driver reg-20-cs-ldo3 requests probe deferral
platform reg-20-cs-ldo4: Driver reg-20-cs-ldo4 requests probe deferral
platform reg-20-cs-buck2: Driver reg-20-cs-buck2 requests probe deferral
platform reg-20-cs-buck3: Driver reg-20-cs-buck3 requests probe deferral
platform reg-20-cs-ldoio0: Driver reg-20-cs-ldoio0 requests probe deferral
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.3.0 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
device-mapper: multipath queue-length: version 0.1.0 loaded
device-mapper: multipath service-time: version 0.2.0 loaded
cpuidle: using governor ladder
cpuidle: using governor menu
[mmc-msg] sw_mci_init
[mmc-msg] MMC host used card: 0x1, boot card: 0x0, io_card 0
[mmc-msg] sdc0 set round clock 400000, src 24000000
[mmc-msg] sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[mmc-msg] sdc0 Probe: base:0xf00e0000 irq:64 sg_cpu:c3c5f000(43c5f000) ret 0.
ehci_irq: port change detect
[mmc_pm]: failed to fetch sdio card configuration!
sunxi_leds driver init
Registered led device: green:ph20:led1
Registered led device: blue:ph21:led2
ledtrig-cpu: registered to indicate activity on CPUs
The port change to OHCI now!
input: USB-compliant keyboard as /devices/platform/sw-ohci.1/usb3/3-1/3-1:1.0/input/input1
generic-usb 0003:062A:0201.0001: input: USB HID v1.10 Keyboard [USB-compliant keyboard] on usb-sw-ohci-1/input0
input: USB-compliant keyboard as /devices/platform/sw-ohci.1/usb3/3-1/3-1:1.1/input/input2
generic-usb 0003:062A:0201.0002: input: USB HID v1.10 Mouse [USB-compliant keyboard] on usb-sw-ohci-1/input1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ashmem: initialized
logger: created 256K log 'log_main'
logger: created 256K log 'log_events'
logger: created 256K log 'log_radio'
logger: created 256K log 'log_system'
IPv4 over IPv4 tunneling driver
TCP: bic registered
TCP: cubic registered
TCP: westwood registered
TCP: highspeed registered
TCP: hybla registered
TCP: htcp registered
TCP: vegas registered
TCP: veno registered
TCP: scalable registered
TCP: lp registered
TCP: yeah registered
TCP: illinois registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
NET: Registered protocol family 17
NET: Registered protocol family 15
[mmc_pm]: No sdio card, please check your config !!
Registering the dns_resolver key type
VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4
Registering SWP/SWPB emulation handler
[cpu_freq] ERR:try to get regulator failed, core vdd will not changed!
[cpu_freq] INF:-------------------V-F Table-------------------
[cpu_freq] INF: voltage = 1450mv frequency = 1008MHz
usb 5-1: new low-speed USB device number 2 using sw-ohci
[cpu_freq] INF: voltage = 1425mv frequency = 912MHz
[cpu_freq] INF: voltage = 1350mv frequency = 864MHz
[cpu_freq] INF: voltage = 1250mv frequency = 720MHz
[cpu_freq] INF: voltage = 1150mv frequency = 528MHz
[cpu_freq] INF: voltage = 1100mv frequency = 312MHz
[cpu_freq] INF: voltage = 1050mv frequency = 144MHz
[cpu_freq] INF: voltage = 1000mv frequency = 0MHz
[cpu_freq] INF:-----------------------------------------------
[cpu_freq] INF:sunxi_cpufreq_initcall, get cpu frequency from sysconfig, max freq: 1008MHz, min freq: 720MHz
registered taskstats version 1
I2C: i2c-3: HDMI I2C adapter
input: Logitech USB Optical Mouse as /devices/platform/sw-ohci.2/usb5/5-1/5-1:1.0/input/input3
generic-usb 0003:046D:C05A.0003: input: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-sw-ohci-1/input0
disp clks: lcd 74250000 pre_scale 1 hdmi 74250000 pll 297000000 2x 0
Console: switching to colour frame buffer device 100x30
platform reg-20-cs-ldoio0: Driver reg-20-cs-ldoio0 requests probe deferral
platform reg-20-cs-buck3: Driver reg-20-cs-buck3 requests probe deferral
platform reg-20-cs-buck2: Driver reg-20-cs-buck2 requests probe deferral
platform reg-20-cs-ldo4: Driver reg-20-cs-ldo4 requests probe deferral
platform reg-20-cs-ldo3: Driver reg-20-cs-ldo3 requests probe deferral
platform reg-20-cs-ldo2: Driver reg-20-cs-ldo2 requests probe deferral
console [netcon0] enabled
netconsole: network logging started
sunxi-rtc sunxi-rtc: setting system clock to 2010-01-01 00:00:00 UTC (1262304000)
ALSA device list:
#0: sunxi-CODEC Audio Codec
EXT4-fs (nandb): mounted filesystem with ordered data mode. Opts: discard
VFS: Mounted root (ext4 filesystem) on device 93:2.
devtmpfs: mounted
Freeing init memory: 588K
Write protecting the kernel text section c0008000 - c07d1000
udevd[192]: starting version 175
EXT4-fs (nandb): re-mounted. Opts: (null)
sunxi_gpio driver init ver 1.3
gpiochip_add: registered GPIOs 1 to 19 on device: A1X_GPIO
platform reg-20-cs-ldo2: Driver reg-20-cs-ldo2 requests probe deferral
platform reg-20-cs-ldo3: Driver reg-20-cs-ldo3 requests probe deferral
platform reg-20-cs-ldo4: Driver reg-20-cs-ldo4 requests probe deferral
platform reg-20-cs-buck2: Driver reg-20-cs-buck2 requests probe deferral
platform reg-20-cs-buck3: Driver reg-20-cs-buck3 requests probe deferral
pwm-sunxi: pwm0 configured - period: 10000, duty_percent: 100, duty: 10000
platform reg-20-cs-ldoio0: Driver reg-20-cs-ldoio0 requests probe deferral
UMP<2>: Inserting UMP device driver. Compiled: Oct 12 2015, time: 12:45:45
UMP<2>: Using OS memory backend, allocation limit: 134217728
UMP: UMP device driver loaded
platform reg-20-cs-ldoio0: Driver reg-20-cs-ldoio0 requests probe deferral
Mali: permit MALI_IOC_MEM_MAP_EXT ioctl for framebuffer (paddr=0x51000000, size=33554432)
mali: use config clk_div 1
mali: clk_div 1
Mali: mali clock set completed, clock is 312000000 Hz
mali: use config clk_div 1
platform reg-20-cs-buck3: Driver reg-20-cs-buck3 requests probe deferral
platform reg-20-cs-buck2: Driver reg-20-cs-buck2 requests probe deferral
platform reg-20-cs-ldo4: Driver reg-20-cs-ldo4 requests probe deferral
platform reg-20-cs-ldo3: Driver reg-20-cs-ldo3 requests probe deferral
platform reg-20-cs-ldo2: Driver reg-20-cs-ldo2 requests probe deferral
mali: clk_div 1
Mali: mali clock set completed, clock is 312000000 Hz
Mali: Mali device driver loaded
Adding 65532k swap on /swap/swapfile. Priority:-1 extents:4 across:147452k
Unable to handle kernel paging request at virtual address c048d7a0
pgd = eeaf8000
[c048d7a0] *pgd=6f7fd801, *pte=4048d4df, *ppte=4048d65e
Internal error: Oops: 80f [#1] PREEMPT SMP ARM
Modules linked in: mali ump lcd pwm_sunxi gpio_sunxi
CPU: 1 Not tainted (3.4.79 #1)
PC is at patch_text+0xc/0x1c
LR is at __jump_label_update+0x64/0x6c
pc : [<c00145a0>] lr : [<c00ac0c8>] psr: 80030013
sp : ee73bf10 ip : 00000980 fp : eec6a8c0
r10: 00000001 r9 : be88b5ac r8 : ee73a030
r7 : 00000001 r6 : c08a2cfc r5 : c08f73dc r4 : c08f6e78
r3 : c08a14f0 r2 : c048d7a0 r1 : ea000009 r0 : c048d7a0
Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
Control: 10c5387d Table: 6eaf806a DAC: 00000015
PC: 0xc0014520:
4520 03a024ea e37303ff e2411008 2a000002 e7f71151 e1820001 e8bd8038 e3064d8d
4540 e34c408f e5d45000 e3550000 0a000001 e3a00000 e8bd8038 e3a0102e e30b0230
4560 e34c0071 eb00952b e3a03001 e1a00005 e5c43000 e8bd8038 e30134f0 e34c308a
4580 e1a02000 e4821004 e1a01002 e5933010 e12fff13 e30134f0 e34c308a e1a02000
45a0 e4821004 e1a01002 e5933010 e12fff13 e52de004 e24dd04c e1a0300d e8831fff
45c0 e1a0200d e58de038 e28f1000 e10f3000 e58d3040 e58d2034 e58d103c eb0add2d
45e0 e1a01000 e30b0248 e34c0071 eb162c2c eb0add28 e1a01000 e1a0000d eb01cfb7
4600 e30134f0 e34c308a e5933004 e12fff33 e30d3880 e34c308f e1932f9f e2422001
LR: 0xc00ac048:
c048 e1530002 3a000002 83a00001 93a00000 e12fff1e e3e00000 e12fff1e e1510002
c068 e92d40f8 e1a04001 e1a05002 28bd80f8 e5916008 e1a07003 e1500006 0a000006
c088 e8bd80f8 e284400c e1550004 98bd80f8 e5940008 e1500006 1a000009 e5940000
c0a8 e3500000 0afffff6 ebfe96e0 e3500000 0afffff3 e1a00004 e1a01007 ebfda0ed
c0c8 eaffffef e8bd80f8 e92d41f0 e1a05000 e5908004 e1a06001 ebff553c e5954008
c0e8 e3c88001 e3540000 e1a07000 0a00000b e5942008 e1a00005 e5941004 e1a03006
c108 e592c138 e5922134 e08cc08c e082210c ebffffd1 e5944000 e3540000 1afffff3
c128 e3570000 030723dc 034c208f 15973138 15972134 10833083 10822103 e3580000
SP: 0xee73be90:
be90 6fc3ba00 ee9c9dfc 00000200 00000000 00000003 c088f540 00000000 ef0fbd80
beb0 c00145a0 80030013 ffffffff ee73befc ee73a030 c000e518 c048d7a0 ea000009
bed0 c048d7a0 c08a14f0 c08f6e78 c08f73dc c08a2cfc 00000001 ee73a030 be88b5ac
bef0 00000001 eec6a8c0 00000980 ee73bf10 c00ac0c8 c00145a0 80030013 ffffffff
bf10 00000001 c08a2cfc ee9e0000 00000000 0000001d c00ac20c c08a14c8 c047fb74
bf30 b6e394d0 c05a8084 00000000 c004b648 b829c6b0 c05a8500 00000001 00000001
bf50 ee73bf64 271ae953 fffffff7 00000004 00000001 eec6a8c0 0000001d be88b5ac
bf70 ee73a000 00000000 b6e394d0 c047bdc8 00000004 ee73a000 00000000 00000000
FP: 0xeec6a840:
a840 00000000 c05b4430 000200da c08aea98 00000000 00000000 eec6a858 eec6a858
a860 00000000 00000000 00000000 eec6a86c eec6a86c 00000000 00000000 00000000
a880 00000000 00000000 eec6a380 ffffffff ffffffff ffffffff ffffffff ffffffff
a8a0 ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
a8c0 00000001 ffff0002 00000000 ee5b0c40 eeb09900 ee9e0000 c0658cb4 ffffffff
a8e0 0000c1ff 00000000 00000000 00000000 ffffffff ffffffff c09abc80 ef00b400
a900 eec6a9b8 000008ae 00000001 00000000 00000000 00000000 00000000 00000000
a920 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
R0: 0xc048d720:
d720 e28dd008 e8bd8070 e92d4010 e1a04000 e3a00001 ebef4d9c e1a00004 ebfffe7a
d740 e1a04000 ebf8f8d3 e30c3640 e34c3098 e7933300 e3530000 1a000009 e3a00001
d760 ebef4dc9 e1a0200d e3c23d7f e3c3303f e5933000 e3130002 1a000003 e1a00004
d780 e8bd8010 ebeec96f eafffff3 eb0467bf eafffff9 e92d4030 e1a04000 e24dd01c
d7a0 e1a00000 e1a00004 eb005b7a e3500000 13a00000 1a000002 e1a00000 e1a00004
d7c0 ebfff783 e28dd01c e8bd8030 e3023c70 e34c308a e59330a0 e3530000 0afffff0
d7e0 e1c420d8 e1921003 1affffed e1a0000d ebef98e8 e1cd20d0 e1c420f8 eaffffe8
d800 e28d5018 e28d3010 e525300c ebf036db e1a01004 e1a02005 e5940014 ebfff62d
R1: 0xe9ffff89:
ff88 ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
ffa8 ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
ffc8 ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
ffe8 ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
0008 ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
0028 ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
0048 ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
0068 ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
0088 ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
R2: 0xc048d720:
d720 e28dd008 e8bd8070 e92d4010 e1a04000 e3a00001 ebef4d9c e1a00004 ebfffe7a
d740 e1a04000 ebf8f8d3 e30c3640 e34c3098 e7933300 e3530000 1a000009 e3a00001
d760 ebef4dc9 e1a0200d e3c23d7f e3c3303f e5933000 e3130002 1a000003 e1a00004
d780 e8bd8010 ebeec96f eafffff3 eb0467bf eafffff9 e92d4030 e1a04000 e24dd01c
d7a0 e1a00000 e1a00004 eb005b7a e3500000 13a00000 1a000002 e1a00000 e1a00004
d7c0 ebfff783 e28dd01c e8bd8030 e3023c70 e34c308a e59330a0 e3530000 0afffff0
d7e0 e1c420d8 e1921003 1affffed e1a0000d ebef98e8 e1cd20d0 e1c420f8 eaffffe8
d800 e28d5018 e28d3010 e525300c ebf036db e1a01004 e1a02005 e5940014 ebfff62d
R3: 0xc08a1470:
1470 f1105a26 3bccfb7d 65a91991 af75b8ca 9b044835 51d8e96e 0fbd0b82 c561aad9
1490 046a0e5f ceb6af04 90d34de8 5a0fecb3 a5d9c4e1 6f0565ba 31608756 fbbc260d
14b0 3ab7828b f06b23d0 ae0ec13c 64d26067 00000001 00000000 271ae953 c00143f4
14d0 ffffffff 000fb0d7 00000009 c001c478 c001c4b0 d0380000 c001c250 c001c214
14f0 c001bfc0 c001c06c c001c084 c001c084 c001c088 c001c088 c001c104 c001c1ec
1510 c001c1fc c001c1b8 00000012 000010bb 10000000 00000001 f1c81000 f1c82000
1530 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
1550 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
R4: 0xc08f6df8:
6df8 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
6e18 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
6e38 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
6e58 00000000 00000000 c05a6e70 c05a6f8c c08a23b4 c005cc28 c005ccc8 c08a23b4
6e78 c048d7a0 c048d7cc c08a2cfc c048f1e8 c048f3cc c08a2cfc c048b5e0 c048b860
6e98 c08a2cfc c048d190 c048d254 c08a2cfc c048d7b8 c048d800 c08a2d20 c048d194
6eb8 c048d1e4 c08a2d20 c0065834 c006583c c08ac0bc c00657e0 c0065804 c08ac0c8
6ed8 c0066bac c0066cf8 c08ac0e0 c0066cd8 c0066cf0 c08ac0ec c00659e0 c0065a2c
R5: 0xc08f735c:
735c c0518e90 c0aca714 c05396a8 c05396c0 c0aca720 c05388b0 c0538a24 c0aca720
737c c0534b38 c0534ee4 c0aca720 c052f43c c052f600 c0aca720 c052e0a8 c052e18c
739c c0aca720 c05189f4 c0518a00 c0aca720 c0518690 c05187c0 c0aca720 c054aaac
73bc c054aac0 c0aca72c c051a734 c051a748 c0aca72c c05181a0 c05182a0 c0aca72c
73dc 00000000 c0719a34 c05aa134 c0719a38 c0719930 0000012f 00000000 c0719a34
73fc c05aa11c c0719a38 c0719974 00000103 00000000 c0719a34 c05aa14c c0719a38
741c c0719a0c 00000153 00000000 c0719a34 c05aa26c c0719ca4 c0719a54 00000033
743c 00000000 c0719a34 c05aa224 c0719ca4 c0719ac4 00000351 00000000 c0719a34
R6: 0xc08a2c7c:
2c7c c08a3c90 c08a2c80 c08a2c80 c08a2c88 c08a2c88 c08a2a8c c08a2a8c c08a2ab8
2c9c c08a2ab8 c08a2ca0 c08a2ca0 c08a3c60 c08a3c60 c08a2cb0 c08a2cb0 c08a2cb8
2cbc c08a2cb8 c08a2cc0 c08a2cc0 c08a2cc8 c08a2cc8 c08a2cd0 c08a2cd0 c08a2cd8
2cdc c08a2cd8 c08a40d4 c08a40d4 c08a2ce8 c08a2ce8 c08a2cf0 c08a2cf0 cc8f5852
2cfc 00000000 c08f6e78 00000000 00000000 000003e8 00000001 00000040 0000012c
2d1c 00000000 00000000 c08f6ea8 00000000 00000000 c0796ed0 00000000 00000004
2d3c 000001a4 00000000 c004267c 00000000 00000000 00000000 c0796ee0 00000000
2d5c 00000004 000001a4 00000000 c004267c 00000000 00000000 00000000 c0796ef0
R8: 0xee739fb0:
9fb0 9b05fecb f2c0221c 42930201 aed2f43f f43f2b00 461eae77 4650e6eb f7e99305
9fd0 9b05fef5 d1412800 007cf8b4 b2921e42 d8952a01 f2c0231c e7cc0301 46294b30
9ff0 46204d30 2230447b 9500447d ff8ef7fd 00000002 00000002 00000000 eea0af40
a010 c08aa608 00000001 00000015 eea0af40 d3811540 ee96c000 ee9c9dc0 00000000
a030 c08a2650 c088f540 ee73bc64 ee73bbb0 c05a6f1c 00000000 00000000 00000000
a050 00000000 00000000 01010000 00000000 b6e394c0 00000000 00000000 00000000
a070 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
a090 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Process dhclient (pid: 1558, stack limit = 0xee73a2f0)
Stack: (0xee73bf10 to 0xee73c000)
bf00: 00000001 c08a2cfc ee9e0000 00000000
bf20: 0000001d c00ac20c c08a14c8 c047fb74 b6e394d0 c05a8084 00000000 c004b648
bf40: b829c6b0 c05a8500 00000001 00000001 ee73bf64 271ae953 fffffff7 00000004
bf60: 00000001 eec6a8c0 0000001d be88b5ac ee73a000 00000000 b6e394d0 c047bdc8
bf80: 00000004 ee73a000 00000000 00000000 00000004 b6f439cc b6e3df10 00000126
bfa0: c000eb04 c000e980 00000004 b6f439cc 00000014 00000001 0000001d be88b5ac
bfc0: 00000004 b6f439cc b6e3df10 00000126 00000001 00000014 00000014 b6e394d0
bfe0: b6f439f8 be88b580 b6f08f53 b6d86da8 20030030 00000014 2400600a d0094295
[<c00145a0>] (patch_text+0xc/0x1c) from [<c00ac0c8>] (__jump_label_update+0x64/0x6c)
[<c00ac0c8>] (__jump_label_update+0x64/0x6c) from [<c00ac20c>] (static_key_slow_inc+0xac/0xb0)
[<c00ac20c>] (static_key_slow_inc+0xac/0xb0) from [<c047fb74>] (sock_setsockopt+0x4d8/0x824)
[<c047fb74>] (sock_setsockopt+0x4d8/0x824) from [<c047bdc8>] (sys_setsockopt+0x9c/0xac)
[<c047bdc8>] (sys_setsockopt+0x9c/0xac) from [<c000e980>] (ret_fast_syscall+0x0/0x30)
Code: e12fff13 e30134f0 e34c308a e1a02000 (e4821004)
---[ end trace 45dbdccbb93fb553 ]---
However follow the guide of generate a new u-boot.bin file, while replace it the system won't start because the uboot search the kernel in mmc and not in nand...
Anyone can help me please ?
I'm so saldy.
If you require more details, please contact me also at nig...@gmail.com
Reply all
Reply to author
Forward
0 new messages