REMOTE COMMAND BETWEEN AS/400 AND NTsever

[John Dimitriou]

Does anyone know exact the steeps to execute remote command
(strrmtcmd - rexec) on as400 and this command call someting on ntserver?????

[Charles Wilt]

In article <7bisbp$fkd$1...@ulysses.noc.ntua.gr>, j...@dissoft.gr says...

> Does anyone know exact the steeps to execute remote command
> (strrmtcmd - rexec) on as400 and this command call someting on ntserver?????
>
>
>

The command to use on the AS/400 is RUNRMTCMD. Before the NT server will
accept it you need to start the 'Client Access Remote Command' daemon.
Go into control panel, select Services you should see this service
listed. If it is not started you need to start it, note: If you'll be
using this often you can set the service to start automatically when the
PC boots. One last thing, be sure to include a valid NT username and
password on the RUNRMTCMD, and since NT uses case sensitive passwords,
unless your NT password is all CAPS you'll need to put the password in
'quotes'

Good luck

--
Charles Wilt
Miami Luken, Inc.
e-mail: charle...@worldnet.no.spam.att.net
--->remove the no.spam.