Router goes into infinite loop

[Ravi Parimi]

Hi,

I have a cisco 7000 router which doesnt go through the complete boot
sequence. It shows the following messages during bootup and keeps
repeating the same again and again :

----------------start of error message-----------------
System Bootstrap, Version 11.1(4), SOFTWARE
Copyright (c) 1986-1994 by cisco Systems
RP1 processor with 65536 Kbytes of main memory
F3: 8616+3883445+165008 at 0x1000
Self decompressing the image :
#################################################
################################################################################
###################################### [OK]
%SCHED-2-WATCH: Attempt to set uninitialized watched boolean (address 0).
-Process= "*Sched*", ipl= 7
-Traceback= 17D7BA 1DE532
Exception: Level 4 at 0x127A7C (PC)
Error in rxboot, trying ROM
--------------------end of error message------------------

I found the pertinent page on the cisco website for this error:
http://www.cisco.com/warp/public/63/scheduler_12422.html#SCHED-2-WATCH
but could not make much sense out of it.

I broke the boot sequence with a CTRL+break but I dont know what to do
after this. Can you please let me know ?

thanks,
ravi

[Jens Haase]

Try to boot a different IOS from rommon using a TFTP Server.

Jens

"Ravi Parimi" <par...@ece.arizona.edu> schrieb im Newsbeitrag
news:Pine.SOL.4.31.02070...@ece2.ece.arizona.edu...

[Phillip Remaker]

"Ravi Parimi" <par...@ece.arizona.edu> wrote in message
news:Pine.SOL.4.31.02070...@ece2.ece.arizona.edu...

> Hi,
>
> I have a cisco 7000 router which doesnt go through the complete boot
> sequence. It shows the following messages during bootup and keeps
> repeating the same again and again :

What image is installed? Is is the appropriate image for the platform?

The image may also be corrupted, try downloading again.