New member

[Mark Nagy]

Hi,

I have a fair amount of experience using manual machines, but I recently got interested in CNC. In my shop I have a 9 inch Logan lathe and a small vertical mill. I recently got a larger vertical mill that was retro fit for CNC, but I am having problems with it. I am looking for other Mach 3 users to share ideas and collaborate with.

Look forward to meeting you

Mark

[Bart Dring]

What are your problems?  I have setup quite a few machines with Mach3

[Mark Nagy]

Bart,

I was using Mach 3 on a PC that kept freezing up so I reinstalled it on a different PC. Now I can control the X,Y and Z axis fine, but the spindle doesn't move. I tried running a few programs as well as using MDI. I checked all of the connections and fuses and I can't find anything wrong. I am using the same configuration that was working on the first PC. Do you have any ideas?

Thanks

Mark

On Tue, Sep 1, 2015 at 5:03 PM, Bart Dring <barton...@gmail.com> wrote:

What are your problems?  I have setup quite a few machines with Mach3

--
You received this message because you are subscribed to a topic in the Google Groups "CNC Build Club" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/cnc-build-club/7ZcZjHg-W7w/unsubscribe.
To unsubscribe from this group and all its topics, send an email to cnc-build-clu...@googlegroups.com.
To post to this group, send email to cnc-bui...@googlegroups.com.
Visit this group at http://groups.google.com/group/cnc-build-club.
For more options, visit https://groups.google.com/d/optout.