Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

Problem with TLSD Driver

19 views
Skip to first unread message

Victor Echavarry

unread,
Jun 8, 2018, 7:51:52 PM6/8/18
to

We are configuring TCP 2.1 under VSE6.1. We use almost the same IPINIT that is running under TCP 1.5F and VSE 3.1. When bringing up TCP 2.1 we receive the following error for the TLSD


TLS908D SSLD diagnostic:TLSDNOCI RC=0000003D RS=00000430


This is the configuration of the TLSD


DEFINE TLSD,ID=TLSDTEL,PORT=992,PASSPORT=23,CIPHER=2F350A0908, -   
CERTLIB=SYSLBS,CERTSUB=SSLKEYS,CERTMEM=SSL4VSE,TYPE=1,MINVERS=0300, -
DRIVER=SSLD                                                          

This configuration works under TCP 1.5 but not under 2.1. 

Does anybody know what is wrong with the configuration


Regards,


Víctor Echavarry 
System Programmer, 

EVERTEC LLC

Leo Langevin

unread,
Jun 9, 2018, 1:53:06 PM6/9/18
to
It means that your specific "CIPHER=" is not valid or supported. "ALL", "WEAK", and "STRONG" are also usable when a specific string is not valid. Contact CSI Tech Support for further explanations.

Cheers!

Leo Langevin

_______________________________________________
VSE-L mailing list
VS...@lists.lehigh.edu
https://lists.lehigh.edu/mailman/listinfo/vse-l
--
All the best,,

Leo J. Langevin
Netzach Yirushalyim 37
Efrat, Israel  90435

Cell: 052-565-6840
0 new messages