361 engine panel dead

[RiffRaff]

My Westerbeke engine panel is dead. I get 11.75 volts at the keyswitch. The keyswitch itself tests okay.

All DC circuits seem to be functioning normally. Battery voltage is at 12.3.

Any ideas on what to check?

[RiffRaff]

Never mind, found it, corroded contact at bell housing ground.

[Mark J Wilme]

Corroded contacts / bad grounds will get you every time.

--
Largest Beneteau group, over **1121
** members and growing.
 
To post to this group, send email to Benetea...@googlegroups.com
To unsubscribe from this group, send email to Beneteau-Owne...@googlegroups.com
For more options, visit this group at http://groups.google.com/group/Beneteau-Owners
contact denny.we...@gmail.com, or ume...@comcast.net if you have a list management question
---
You received this message because you are subscribed to the Google Groups "Beneteau Owners" group.
To unsubscribe from this group and stop receiving emails from it, send an email to beneteau-owne...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.