Beneteau recommend the use of Mohawk pre cat spray. I believe the M105 has slight tint in the spray.
I use it all the time it gives a near factory finish. Build up a few coats of the sanding sealer on any rough spots. Then us the spray. It melts into the lacquer finish dries in minutes.
When finished a little rub with Aqua bush to get the shine where you want it
Fletch
Sent from my Samsung device
-------- Original message --------
From: Sails Call II <
jan....@verizon.net>
Date: 2016-04-07 8:23 AM (GMT-05:00)
To: Beneteau Owners <
benetea...@googlegroups.com>
Subject: {Beneteau Owners} Re: Refinishing inside table
Consider Helsman spar varnish by Minwax. It's great for bar tops,etc. because it doesn't leave water marks from glasses, etc.
On Wednesday, April 6, 2016 at 3:37:54 PM UTC-4, ekhar wrote:
My table in the salon has been showing signs of old age
I had it sanded, will stain
What lacquer? should I use to seal it. Gloss, semigloss, regular from home depot or some fancy for marine applications?
Thank you
--
Largest Beneteau group, over **1121
** members and growing.
To post to this group, send email to
Benetea...@googlegroups.com
To unsubscribe from this group, send email to
Beneteau-Owne...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/Beneteau-Owners
contact
denny.we...@gmail.com, or
ume...@comcast.net if you have a list management question
---
You received this message because you are subscribed to the Google Groups "Beneteau Owners" group.
To unsubscribe from this group and stop receiving emails from it, send an email to
beneteau-owne...@googlegroups.com.
For more options, visit
https://groups.google.com/d/optout.