關於BeagleBoard-XM Expansion V2 的問題
73 views
Skip to first unread message
ball chan
Sep 25, 2011, 12:33:54 PM9/25/11
to beagle...@googlegroups.com
我按照新手區內,"使用BeagleboardxM-架設內建Wi-Fi的Android核心
"的文章來set up
做到編譯Wi-Fi SourceCode出左問題
我輸入: $ ./WLAndroidBuild.sh build wlan
output:
Wireless module building ...
Wireless module compilation started, Please Wait ...
ERROR: Wireless Build failed ...
Refer log file: /home/administrator/wlan1271/buildlog/wlanBuild.log
Use below command to build|rebuild individually wireless module .....
Usage:./WL1271Build.sh build|rebuild wlan
我再輸入: ./WL1271Build.sh build wlan
output:
Checking build setup.
It may take few seconds, Please wait ...
Compiler /opt/crosstools/codesourcery/arm-2009q1/bin/arm-none-linux-gnueabi-gcc does not exist!
請問如何解決這問題?
做到編譯Wi-Fi SourceCode出左問題
我輸入: $ ./WLAndroidBuild.sh build wlan
output:
Wireless module building ...
Wireless module compilation started, Please Wait ...
ERROR: Wireless Build failed ...
Refer log file: /home/administrator/wlan1271/buildlog/wlanBuild.log
Use below command to build|rebuild individually wireless module .....
Usage:./WL1271Build.sh build|rebuild wlan
我再輸入: ./WL1271Build.sh build wlan
output:
Checking build setup.
It may take few seconds, Please wait ...
Compiler /opt/crosstools/codesourcery/arm-2009q1/bin/arm-none-linux-gnueabi-gcc does not exist!
請問如何解決這問題?
Hank
Sep 25, 2011, 9:33:49 PM9/25/11
to BeagleboardTW
Dear Ball Chan
請先看看這個log裏面的錯誤訊息寫什麼喔，
Refer log file: /home/administrator/wlan1271/buildlog/wlanBuild.log
請先看看這個log裏面的錯誤訊息寫什麼喔，
Refer log file: /home/administrator/wlan1271/buildlog/wlanBuild.log
Hank
Sep 26, 2011, 10:55:04 PM9/26/11
to beagle...@googlegroups.com
Dear ball chan
請看這一行的error message
ERROR: Kernel configuration is invalid.
include/linux/autoconf.h or include/config/auto.conf are missing.
應該是kernel config沒有設的問題。
$make ARCH=arm omap3_beagle_android_defconfig
另外補充一下，touch v2的source code是由
Beagleboard -xM & Beagle Robot Board Source這一區的source code更改而來的
要使用touch v2需要把touch v2的source code覆蓋掉Beagleboard -xM裏面的source code喔
請看這一行的error message
ERROR: Kernel configuration is invalid.
include/linux/autoconf.h or include/config/auto.conf are missing.
應該是kernel config沒有設的問題。
$make ARCH=arm omap3_beagle_android_defconfig
另外補充一下，touch v2的source code是由
Beagleboard -xM & Beagle Robot Board Source這一區的source code更改而來的
要使用touch v2需要把touch v2的source code覆蓋掉Beagleboard -xM裏面的source code喔
ball chan
Sep 27, 2011, 5:21:09 AM9/27/11
to beagle...@googlegroups.com
The problem after inputting " ./WLAndroidBuild.sh build
wlan " is still exist.
input:make ARCH=arm omap3_beagle_android_defconfig
output:
# configuration written to .config
#
input: $make TARGET_PRODUCT=beagleboard OMAPES=5.x
output:
#
# An unexpected error has been detected by HotSpot Virtual Machine:
#
# SIGSEGV (0xb) at pc=0x402d3a16, pid=6849, tid=1169582960
#
# Java VM: Java HotSpot(TM) Client VM (1.5.0_22-b03 mixed mode, sharing)
# Problematic frame:
# V [libjvm.so+0x12aa16]
#
# An error report file with more information is saved as hs_err_pid6849.log
#
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
#
make: *** [out/host/linux-x86/obj/EXECUTABLES/vm-tests_intermediates/tests] Aborted
input:make ARCH=arm omap3_beagle_android_defconfig
output:
# configuration written to .config
#
input: $make TARGET_PRODUCT=beagleboard OMAPES=5.x
output:
#
# An unexpected error has been detected by HotSpot Virtual Machine:
#
# SIGSEGV (0xb) at pc=0x402d3a16, pid=6849, tid=1169582960
#
# Java VM: Java HotSpot(TM) Client VM (1.5.0_22-b03 mixed mode, sharing)
# Problematic frame:
# V [libjvm.so+0x12aa16]
#
# An error report file with more information is saved as hs_err_pid6849.log
#
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
#
make: *** [out/host/linux-x86/obj/EXECUTABLES/vm-tests_intermediates/tests] Aborted
Reply all
Reply to author
Forward
0 new messages